I bled my brakes yesterday all four, right rear to left rear etc.
how is the fluid suppose to come out? a constant flow or what?
I let the rear ones just trickle a little then shut them off....
the front ones didnt even need pressure they came out pretty good. After doing all this started the vehicle and the brakes seemed softer then they did before help dont konw what I did wrong
thanks in advance

you need an assistant to pump the brakes or a pressure bleeder<ul><li><a href="http://www.germanautoparts.com/">http://www.germanautoparts.com/</a</li></ul>

install a 6-mm (15/64-in) drill bit between roller and end of spring on brake pressure regulator (Quattro)? The specified amount of brake fluid to bleed is approx. 500 cc per wheel (2.0 liter total).

Make sure Park brake is not engaged!