I have a set of g 60 twin piston calipers for the front, as well as b4 knuckels. I pressed out the hubs last night.

Now i just need to know what hubs and rotors will have the right size and off set to use with the g 60's.

Any body use this set up befor???

Ive done numerous searches. And since Im not doing anything crazy brake-wise, should I be able to use S4 huds or UrS4 hubs or even something different for the front??

I all ready have my rear setup. B5 s4 rear calipers and rotors, and 1.8 tq rear hubs.

Im not about to go spend a grand on a set of hubs, when other ones are readily aviable.

UrS4/S6 front hubs, 5mm hubcentric spacers, UrS4/S6 rotors and 4 .125" washers (can't remember ID/OD or Mcmaster part number but you can search my name here and I thought I posted it).

You need to put the spacer between the rotor and Hub and then space the caliper bracket back using the washers to get everything to line up. I have a similar setup on my B4 90 with over 5K miles on it now with not problems.

Out back I have a full set of B5 S4 brakes, rotors, hubs. A little wide but my wheel offset is a generous et45 with 17x7.5 rims