I remebered doing a compression test revealing that cyl#1 was 110psi and cyl#4 was 140 psi....that seems low. I have almost always had a rough idle and maybe my cams just aplified it to the point to read a misfire. It might be possible that I need a valve job although I will be replacing with port&polished heads. Thoughts??
Brad
Playerseightball@aol.com

110 and 140 are low, thought the range was 160-200psi. Its in the Bentley for sure...

well i gues i'm missing 20-30HP untill iget a valve job....although will go with P&P heads from TDL so that there adds another 15hp