Audi_lover_4_life?
08-08-2001, 01:51 PM
alright ive been reading the dumping codes page and I went and looked in my fuse box and I can not find these two connectors they are talking about. In the left hand side of the fuse box I see a white (k\l) connection or pin and the black (+\_). I dont know how to connect them how the website specifies ("You'll want to connect the right-hand pin of the connector closest to you with the right-hand pin of the connector behind it.} can someone explain to me step step how exactly to do this. thanks
QCRAZY
08-08-2001, 05:35 PM
<img src="http://pictureposter.audiworld.com/1889/fusepanel.jpg">
Okay, the connectors you are looking at are C and D. These are the plugs you want to "connect"!!
As you can see above, each plug has 2 terminals. Meaning that each plug has a left and right terminal. "Connect" the right-hand terminals (of the white to the black) and then go watch your check engine light flicker!! (Have a piece of paper so you can write the codes down)
To "connect" them you need a jumper wire. You can make your own by using a small peice of wire and stripping both ends and then twisting the wires to a point!!
Follow the rest of the instructions and let us know what codes you get!!
HTH!!
---
Andrew
90 80q
95 90q