Nothing substantial to show in the pictures but I did finish sorting out old wiring harness and did a lot of cleanup and some pretty-ing up:-)

Most of the engine bay looked like this bracket at the bottom...
<img src="http://pictureposter.audiworld.com/37962/dsc03791.jpg">

And then after 3-4 hrs of elbow grease...
<img src="http://pictureposter.audiworld.com/37962/dsc03790.jpg">
Since my engine is not coming out this time I had to clean the head and the block in the bay - not easy but I did it.

Since there is no more AC, I figured might as well pull out the last piece along with all the associated wiring under the hood and inside the car.
EVAP comes out...
<img src="http://pictureposter.audiworld.com/37962/dsc03795.jpg">

<img src="http://pictureposter.audiworld.com/37962/dsc03796.jpg">

Then finally, I decided to pretty up a top of the motor....it went from this:
<img src="http://pictureposter.audiworld.com/37962/dsc03793.jpg">

<img src="http://pictureposter.audiworld.com/37962/dsc03794.jpg">

To this:
<img src="http://pictureposter.audiworld.com/37962/dsc03797.jpg">

It came out real good, pics don't do it any justice.
<img src="http://pictureposter.audiworld.com/37962/dsc03801.jpg">

Still some work left to do but its coming along, for now. G-man w/Taurus boys will be cutting it real close.