Not wanting to add the s-line badge or any other non accurate badge to my car, but adding a s-line grill, I have a issue.

What to put in the place of the sline badge. Here is my solution. I need to make a backing so i will cut a piece of matching grey plastic from behind the plate holder on my stock grill.



<img src="http://pictureposter.audiworld.com/6174/img_9148.jpg">

<img src="http://pictureposter.audiworld.com/6174/img_9149.jpg">

<img src="http://pictureposter.audiworld.com/6174/img_9150.jpg">

:-P

have you thought about ryan's "audi competition" badge?

Dave

My car is not......;)

;-)

Just change your license plate to SO HAWT and be done with it . . . hehe

Anyway SO HAWT was allready taken, DMV Says it was on a Red A3, someone in LA who has since left the state... But the rights on the plate are still owned for 1 year so i will have to wait./.

;)

I used the 2000 grit SP to wet sand and then polished.

I bought a high quality 2 stage clear coat- which i have yet to use. But that should do the trick. Im going to re-clear the whole wheel.

Doing all 5 for a perfect match. The paint supply shop basicly said all single stage aerosol clear coats suck, so not just the wurth is garbage. The stuff i bought was 20 per can and can only be used once.

Thanks again Craig

2 stage clear coat . . . never heard of that. Do let us know how it works out for you.

Dave

they had a sample it was very nice. I hope it works.

<ul><li><a href="http://forums.audiworld.com/a3/msgs/56748.phtml">http://forums.audiworld.com/a3/msgs/56748.phtml</a</li></ul>

no biggie IMO . . . your car certainly fits the bill.

Dave

you would probably have to get it custom made