Hi, did someone had this problem before.I dont have spark at any cylined,I checked the fuel pump,injectors and they work.
I don't get output from the ECU to power output stages(bank 1 and 2)
I also checked the engine speed sensor and its good

what diag codes you get

Double-check your ecu connectors, look for bent terminals, etc. You may have a bad ecu, also check your ecu fuses, and make sure your ground points are secure (under the coolant reservoir, on the firewall, and the startere ground strap from the frame rail to the engine mount bracket). Other than that, I'd have to see what the dtc's are.

YOu said the rpm sensor is good, what about the cps?

If it doesn't, that would indicate a bad chip or ECU.