I was thinking about the gt30r is the biggest? i maybe wrong.

you prolly can't use the stock airox. Either way, you can always make an adapter to make other bolt patterns fit.

much bigger and you'll have to cut part of the frame rail out.

BTW Ray...post for you over <i>there</i>

to the radiator since a turbo with a larger intake inlet will need a larger tube with a larger bend.

dang so much to do , to get a bigger turbo :(

just make a hole the size of the inlet in the radiator and the bumper and jsut have the turbo suck air right in :&gt;)

I guess I better put that back in the car. =P

A Gt25 with a 35 Core.
The turbo is cabable of over 400hp.
But How good does the Manifold Flow?
If you manifold flows less to what the turbo
wants, than you have a limit.

Actually, you can get a T25 to T3 bolt pattern adapter, so that you can fit any size turbo that you would ever want.

Without the adapter, the turbine must be limited to a T25 bolt pattern, meaning the GT30 will not fit. The compressor could be any size.

by the manifold.