when turning on the car i see this message, everything checks out well, and is fine.
just wondering how to reset this?

or do i need to call the dealership.

Find someone local to you who has one.

Post in your regional forum, someone should have one.

You'll need to know the proper locations and inputs. Someone will post a link, hopefully. I need to change my oil and do mine, I'll try to remember to post before the weekend is out.

[Select]
[17 - Instruments]
[Adaptation - 10]
Enter the correct channel from the list below in "Channel Number"
[Read]
The "Stored Value" is the current value for that channel.
Enter the "New" value of from the list below.
[Test]
[Save]

Channel 05 should be the distance until the next Oil Service.
It is in thousands of kilometers. Let's say you want the Oil
Service light to come on in 5000 miles. That would be 8000 km.
Put the value 8 into channel 05. The "standard value" used by the US
dealers would be 12 (7500 miles).

Channel 06 should be the distance until the next In-1 Service.
Same units as above. Standard value would be 24 (15,000 miles).

Channel 07 should be the time until the next In-1. In-1 lights
up based on time or distance, whichever comes first. This is in
10's of days. Standard value would be 36 for 360 days.

Channel 08 would be time until the next In-2. In-2 is based
strictly on time. Standard value is 72 for 720 days (about two years).

I use vwtool and i connot access more than the fourth channel????