Here is a good deal, you can save $100-120 on a case.<ul><li><a href="http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&amp;category=46104&amp;item=7928763 550&amp;rd=1">http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&amp;category=46104&amp;item=7928763 550&amp;rd=1</a</li></ul>

thanks I need to do my tranny.. are you sure this is the right one for a 97 a8Q? I think I read that you only need 9 or so liters.. so this should work out.. thanks

I just bought a case last night from them, $120 with shipping. If you buy 9 or so from the dealer, it will cost you more. ( Audi dealer $21.00/L, VW dealer $17.50/L )I will remove the valve body, so almost all the fluid will come out. Last time I removed the valve body, I was able to fill 11 liters.

Me not too bright. What is this...Valve body.... of which you speak.

I would love to get most of the fluid out, but realize the torque convertor will always be wet. So, where is the valve body? How difficult is removal, and for that matter is there any other way to get more of the old fluid out without too much difficulty.

Thanks,

Brian C.

I would not recommend to remove the valve body if you are not an expert! I am doing it because I have transmission problem and I did it a few times already. If you decide to remove the valve body or just loose the screws, here is the picture. Do not touch any other screws!
<img src="http://pictureposter.audiworld.com/80919/getimage.jpg">