I will actually probably use an 8 gauge lead.<br>1 soundstream 4*75<br>1 blade 2* 200<p>1996 a4 2.8 qm

and I ran it into the ECU housing (through the rubber piping on the front). Once its inside the ECU housing, push it towards the back and down and the wire should come out by the drivers' side footwell. It's up to you from there (just make sure you use a fuse!).

I slid the 4 guage wire through a hole i cut in it and then popped teh grommet back in it dumps the wire right down teh left hand side of car, and you can easily tuck it under moldings then. If you want a pic i'll take one 4 you<p>BTW i'm running a soundstream 805 - 4*100+400*1