View Full Version : Looking for suggestions for sidemarker ease of removal...


Hal
12-21-1998, 06:48 PM
Bought clear sidemarkers and see how they are "spring-loaded" on the front side - however they are difficult to remove. Is there a trick? The owners manual mentions nothing on these. I don't want to break anything. Any help appreciated.<p>98.5 A4QMS2.8 Avant

Dmak
12-21-1998, 07:16 PM
c

Stu Raike
12-21-1998, 07:16 PM
I used a small flat blade screwdriver to pop out the rearward side of the lens. Putting a towel between the fender and the screwdriver, then using the screwdriver to push forward and pry out. The lense popped right out. Pry from the rear.<br>

Stu Koch
12-21-1998, 11:09 PM
<br>nt

T2
12-22-1998, 05:52 AM
I found them very easy to pop out from the front. Like below, I use a credit card that I slid from the front, pushing back on the tab. Then they just pulled out from the front.<p>Tom<br>1.8TQMS Silver/Ecru

Anders
12-22-1998, 09:37 AM