View Full Version : 30v V6 Discussion
- Welcome to the 30v V6 forum
- Finally a place for us !
- There's no replacement for displacement.
- meh... 12v forum still roxors the 30v forum
- Unorthodox Racing Pulley Saga (Long)
- Is this designed for Normally Aspirated or 30v V6 2.7T's as well?
- Actual hp vs. rated hp
- Woooo! It's so crazy in here. It's 18 crazier than that other forum!!! Wooo!!!
- We got our own forum? Nice. Welcome all!!!
- How many people are running a stg3 MAF or velocity stack?
- So who here can get G1's? Anybody? Anyone come across a used G1 s/c let me know please.
- High-Flow Cat
- Now that there's a 30v V6 forum, can anybody here suggest some mods to the 3.0?
- No mods to discuss yet but I just want to say
- So what are 2.8 owners using for new plugs and wires?
- Will Stebro's A4 2.8 cat back work for on the A6 2.8?
- Who makes headers for the 2.8 motor?
- Stealing an idea from the I5 forum.
- our own forum....
- My 3.0L baseline dyno graph. The PowerChip-Chip goes in this weekend but I won't have an after dyno
- Just thought I'd post my head pic here too . . .
- are the head gaskets the same for the 2.8 and 3.0??
- Need help diagnosing a problem. I'm getting a clunking noise from my rear passenger side near the
- Rough Idle kinda low on power..
- Anyone else do the VAG softcode A4 programme to A6 200hp/210ft-lbs? Works for me.
- anyone have any performance mods/tips for the 3 liter to share?
- Engine Rebuild Question
- I guess i'm going to have to get this forum moving!!
- Hey A4X4
- PSA: Don't forget, G1 on ebay right now.1 day left!
- Hey Walter..still on??
- Whats the highest mileage anyone has gotten out of a 2.8???
- Bosch 4+ or BKR6E?
- Mobil 1 (M1-204) Oil Filter Warning - All Audi applications for this filter have been revoked per
- Just picked up the Stage 3 MAF and Velocity Stack can't wait to get it in. Anyone else running it?
- Stripped Bolts
- PSA: 30V 2.8 SUpercharger On Ebay right now, $1000, 9 hours left
- any further Info on VAG softcode mod......
- ECU MAF connections
- Chid Mod on 98 A6 2.8. Is it worth?
- PSA - cat back exhaust system 2.8 A4 - Milltek fitment issues
- 3.0L Powerchip Feedback
- Possible 2.8 recall?
- Wideband O2 sensors
- anyone know anything about this?
- Follow-up to Mobil 1 oil filter (M1-204) post re: thread reach problems with this filter for 2.7t...
- My Stebro dilemma
- Anyone have any Dyno numbers from a stock B6 A4 3.0 liter V6?
- Anyone running a custom Mangnaflow exhaust on a 2.8 here?
- 3.0L Chip Review: Powerchip (purchased through Stealthauto.com) Final review...
- Engine temp problem.......
- of course....now that i decide to sell my 2.8SC this forum comes along. =P
- This forum is so dead. I want to hear from anyone who's done any major customization to the 30V
- G1 S/C and aftermarket intake.
- Don't listen to my advice..
- More cooling news.
- Damaged catalytic converter experience. Replaced with generic
- I always thought..
- Benefits of an EFK (electric fan kit)
- Overheating fixed
- Broken Tube
- My 2.8 has a slight hesitation with fast acceleration from a stand still.
- Cross post A4, NY, 30V Koni sports yellow (non adjustable) Vs Bilstein Sport Shocks
- Intermittent CEL...WTF?
- What weight oil do you guys use in the winter?
- Ho ho ho...Holiday Sales
- So any A6's/A4's in Seattle area with PES system?
- Ideas for a good aftermarket MAF?
- Recall (Finally)
- 2.8 30V what oil?
- Crosspost. HELP!
- Anyone got HR/Koni set-up on an A4? Already have HR springs but looking at Koni's
- What sparkplugs are you using? Most of the archives are for 1.8's.
- Help needed adjusting warmup fuel enrich
- Cold Air Intake...
- Late Season Pics (4 pics)
- Follow-Up: Race/Sport Cats
- EvoMS Intake Pics (2)
- anybody know whp for a fwd 2.8 (a6...even though i dont think it matters)
- PAGING 2.8whine: Supersprint header
- RMI Porting
- Adaptation channels
- What Exhaust Do You Recommend
- Uh...oh....Did I break something important??
- Paging Superslow90q.........
- Which chip is best for 2.8Q?
- Anyone have sound clips or opinions of the Borla exhaust for the 2.8?
- does anyone have any idea of a pesg2 supercharger runs 1/4 mile?
- From the B6 forum: death of a 3.0 engine
- first gear vibrates and shakes
- 2.8 specifications? Real development?
- Magnaflow 14815 installed
- 2004 a6 3.0l/
- Knock at startup.
- 2.8 30v what oil do you all use? I do castrol full synthetic 5w40
- 30V stock injector?
- just had manifolds(headers) & CDA filter done
- does lemmiwinks work in a 99 A6q avant?
- Alright I want to clean out my engine with seafoam.
- where to buy the EVO intake for the 30v?
- 30 valves are better because...
- Anybody with lighter engine pulleys notice a difference in engine performance?
- No Cam Adjustment
- does anybody have time slips for an 2.8 sc.
- mobil 1. 0-40 consumption 30v in the UK - re-ringed?
- I need more power.....
- one of my spark wires failed, where can i get 1 new one? or used?
- RMI Porting (Update)
- Difference between A4 and A6 2.8?
- Conflicting information available.
- 30v still rattles after change of wp and pulleys
- Anyone change timing belt on 3.0 v6?
- 98 30v (ECT) sensor
- my auto tranny is toast
- Those crafty Poles - 2.8 -> S4 -> RS4 conversion
- upgraded motor mounts for 2.8??
- n00b differential question....
- Anyone, what would cause oil pressure to rise to the point of blowing out of the seals/filler cap?
- Just picked up this exhaust. Can't wait to put it on. By far my favorite of the exhausts for our car
- The tips cleaned up very nicely with some Mother's Mag and Alum polish
- 60k Service & Aftermarket Warranty Musings
- anyone have the new stratmosphere 3.0l hyperflow intake?
- x-post cat size for 98.5 2.8 q
- Anyone have Cam sprocket tool for timing belt change? WTB, or borrow
- Engine specifications and ..2.7/2.8
- If you have spare time and Vag-com.
- Is there a msd ignition coil system for our 2.8L's?
- Torque converter
- 2.8 Intake
- Bentley owners, looking for pins to test to ensure my ECU is getting proper power. I don't want to
- I too need a wiring diagram
- CDA Intake?
- What's the biggest exhaust for PES G2?
- RS4 Cams for 2.8 30v?
- Could an ECU be reprogrammed such that when cruising, only a bank of cylinders are used?
- Caps Times
- Whos the one with the 2.8q turbo? he did is own R&D from home, a californian i think.
- people with aftermarket filters...what do you do with the breather hose?
- just changed brand new tip tranny :-(
- somone wanna post stock MAF readings...just curiuous how they compair
- 2.8 30V...NEED MORE POWER
- Anyone here running a Roar Cold Air Intake, and what are your thougts?
- Need help with check engine light trouble codes...
- I've done searches on this but can't quite fit all the variables together. Oil question
- Slight OT: Some new RS4 pictures
- i need a new 02 sensor planning on DIY can someone email me the bently
- What is the size of the hub on the A4? Would spacer with 3 1/6" hole fit over it?
- Cam chain tensioners common problem?
- Hey all. need some feedback on this one.
- oil pan part number?
- has anyone taken out there Air Cond.
- Ok...found some answers..not that I wanted these particular...
- needed some info on 1/4 mile time?
- can anyone tell me is this b2/s2?
- Fit S8 brakes to a 2002 B5.5 V6 4motion?
- Hot engine idle rattle
- would an 2.8 30v from an roll get owned by an 1.8t 150hp chipped
- stock exhaust piping size for 1998.5 A4 2.8Q V6 30V ??
- Anyone done the electric fan kit mod on their 2.8? Noticed any gains?
- Cam seals and leaking...
- remus muffler, magnaflow high flow cats, custom 2.5" piping. sound?
- Can someone tell me what kind of O2 sensors are on a 98.5 2.8qm?
- giac chip, intake, and tints... all in one week!!!
- burning oil question....
- Rear 02 sensors
- Bearing noise on Audi ALG engine
- i think somebody wanted to buy a 30v engine...theres one on ebay
- X-post from A6 forum: PES G2 S/C on 2.8!!!
- POLL: at what increments do you change oil on your 30 valvers?
- Any 2.8ers with RS4 motor mounts?
- anyone know where i can get a g1 supercharger kit?
- Poll: at how many miles did you replace your spark plug wires?
- any thoughts....
- s4 engine swap... will it work?
- Any of you 30V guys use the 12V oil filter
- G2 for $1800
- Some Good News
- Can't recall who posted the joke: There are two types of 30V engines; ones that need the cam
- Dyno run for the 3.0 (stock other than a Supersprint exhaust)
- X-post from AZ: PES G3 dyno plot
- Ok, settle this discussion... 30v oil change - 6 quarts or 6.25 quarts
- Excellent B5-A4 in classifieds, A4 quattro sport, posted 4/26
- 5th Annual Audi Expo! - It's coming!!!
- Has anyone found a fix for oil leaking from the filler cap? (Besides breather & suction pump)
- Anybody here have a set of camshaft tools to do the timing belt on a 30v
- H&S Chip Tuning
- Exhaust Options
- I am thinking of doing a tranny swap......
- Wondering how to take out the yellow piece on my headlights
- Has anyone here ordered the H&R race/Bilstein combo from AWE for a 99.5?
- FYI : PES Supercharger Bulk Buy
- Repost, oil leak on a 30 valve 2.8
- used G2 on ebay
- memories...
- 30v Poll: Which Sparkplugs do you use?
- Oil temp poll
- 5th Annual Audi Expo - Come be a part of history again!
- does anybody have 1/4 mile times
- Help find injectors
- 2003 A4 3.0 Sport Pkg, Auto
- 9 days 'til Audi Expo! - Have we heard from you ?
- What do you guys think is the reason Supersprint makes headers only for the 2.8?
- 5th Annual Audi Expo - Schedule:
- Crankshaft swap
- Took a full 8 quarts for oil change on my 30v.
- 3.0 hyperflow
- A6 Performance 2.8
- I was going through back issues of European Car...
- just got a 98 2.8 Q. what are some mods I should do 1st?
- Flatspot in 2.8
- At what mileage interval is it recommended that Spark Plug Wires be changed?
- whos got the best software set up for the B6 3.0
- PSA: 8 days left in the supercharger/PES bulk buy
- Just did a coolant flush in my 2.8
- Nenad, Question.
- Alright, I am replacing my engine mounts. Where is the write up?
- how much is this car worth?
- Oil choices (yet again-sorry!)
- leather seats
- buying '98 A4 30V
- Anyone running Greddy G2 exhaust on a 30V 2.8?
- Oil leak.....blocked oneway check valve (the green one)
- clutch time.. someone talk me through which path to take..
- cheapest place to buy an odd # of ignition cable? need some new ones.
- how to replace the fabric wrapped vacumm hoses on the top of the intake manifold..
- Timing belt [kit] question
- exhaust question
- Xpost, Please help ID noise under throttle..
- I seek your approval on my new oil and plug choices
- European Car G3 article
- Got an exhaust leak on 1 side and a cat going bad on the other side. Need suggestions.
- PSA: G1 supercharger for sale (not mine)
- 3.0 V6 vin split???
- 2.8 intake
- Going to clean my throttle body this weekend, using this write up, I wanted to
- Velocity stack available still? Is UrS4 still doing them?
- Some graphics I've created over the years
- anyone got a used 3.0 not attached to a car?
- K&N vs Blitz air filters
- TB Change - Torque on bolts
- Xpost, good fortune with recent tuneup
- My BMC CDA installation (x-post from B6 forum)
- A.W.E. Tuning at H2O International September 25th
- K&N...
- My H2O gallery is up
- Chip Anyone?
- Flame suit on (just in case) but thought I would share with the rest of the 30v community.
- silly question
- engine swap question
- What aftermarket Spark Plug Wires are available for the 30V? Any feedback from those who have them?
|
|
vBulletin® v3.7.5, Copyright ©2000-2013, Jelsoft Enterprises Ltd.