Jack88

All right, I give up. How do you reset the service light? I reset every parameter in VCDS after the quick button for reset service light didn't work, and it still says "Service!" Of all the stupid things to be stumped by, I know...

greyrust

I've had good results by using the key to start the vehicle, post RSL procedure.

uberwgn

Jack, have you seen the Ross Tech video on the various methods:

Jack88

I don't know if it was the key or doing the SRI quick reset the right way. I don't know why, but when I clicked the SRI button, seeing it check all the values made me think it was resetting them. I hadn't seen the pull down menu. Then I started it manually with the key and the light is now gone. Thanks for the quick and easy answer to a stupid question. Now, if only I could figure out why there's a code for N201 Driver's Side Ignitor keeping the airbag light on...

TSHong

For that type of airbag code, the usual fix is DeOxit contact cleaner or just remove the connector and splice the wires using butt connectors or soldering.

Jack88

The connector for the ignitor looks like it's really hard to access. Are you supposed to get at it through the trunk or is the rear deck supposed to come off?

mishar

Not sure which airbag connector you are looking for but there are some underneath the rear bench.

TSHong

Which igniter is giving the fault code?

uberwgn

That's the piece so many miss. Glad you got it sorted.

Jack88

N201 Driver's Side Rear Igniter. Looking at diagrams I have, it looks like it's the one in the rearmost pillar.