A8 / S8 (D3 Platform) Discussion Discussion forum for the D3 Audi A8 produced from 2003-2010 and Audi S8 produced from 2006-2010
Sponsored by:
Sponsored by:

**Don Nguyen | Vinyl roof wrapping, tail light tinting, black out chrome trim install

Thread Tools
 
Search this Thread
 
Old 04-08-2014, 08:13 AM
  #41  
Former Vendor
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Feb 2009
Posts: 7,151
Likes: 0
Received 6 Likes on 5 Posts
Default

I am considering doing a group buy on tinted/smoked tail lights. If I can get around 5-10 people together, I can give a group discount. If you’re interested in this, e-mail me directly at donathon@gmail.com

This brand new white Mercedes C250 sedan came in to have me wrap his roof in my gloss black vinyl material and also tint/smoke his tail lights. I took several comparison pictures of the tail lights before/during/after and inside/outside, to show you guys the progress and how it looks like in different lighting. The owner of this car brought his car in to me in Anaheim Hills/Orange County to have the work done.

Before:




Driver/left side tinted/smoked - passenger/right side stock:


Both sides tinted/smoked:


Stock/untinted:


Smoked/tinted:


After:














-Don Nguyen

donathon@gmail.com
Old 04-11-2014, 12:52 PM
  #42  
Former Vendor
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Feb 2009
Posts: 7,151
Likes: 0
Received 6 Likes on 5 Posts
Default

Just to clarify for those who are interested, the tail light tinting group buy is going to only be available for locals. If you’re interested in this, the group buy list is still active, e-mail me directly at donathon@gmail.com to be added.

The owner of this white Porsche Cayenne S SUV came by to have me black out his brushed aluminum window trim, vertical side pillars, lower door inserts, and rear bumper bar all in my gloss black vinyl material. We went with gloss black for this car to have it match the darker window tint on the car. I believe the owner of this car was from Los Angeles county and came out to me in Orange county to have the vinyl work done.

Before:




After:


















-Don Nguyen

donathon@gmail.com
Old 04-16-2014, 08:48 PM
  #43  
Former Vendor
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Feb 2009
Posts: 7,151
Likes: 0
Received 6 Likes on 5 Posts
Default

I previously blacked out the window trim and tinted the red portion of the tail lights on this BMW E61 5 series wagon. This time he came back to have me wrap the roof of his car in my gloss black vinyl material. I did the entire roof and the small top section of the rear spoiler, following the lines of the roof. The owner of this car was from Newport and drove out to me in Anaheim Hills/Orange County to have the work done. This was a big roof to do, and I haven’t done many wagons, so this will help other wagon owners get an idea of how it looks like on such a long car.

Before:




After:














-Don Nguyen

donathon@gmail.com
Old 04-22-2014, 08:56 AM
  #44  
Former Vendor
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Feb 2009
Posts: 7,151
Likes: 0
Received 6 Likes on 5 Posts
Default

The owner of this white Mercedes C63 AMG coupe had me tint the tail lights on his car with my light tint/smoke film. I had previously blacked out his chrome/brushed aluminum window trim with my gloss black vinyl material. With the darker colored theme that the owner of this car was going for, I think the tail lights added a nice subtle touch. I only use one shade, and this is the same shade that you see in all of my pictures. Some times it may appear darker on whiter/lighter colored cars compared to darker/black cars, but that’s because of the contrast difference that makes it appear that way. The owner of this car was in Newport Beach and drove out to me in Anaheim Hills/Orange County to have the work done.

Before:




Driver/left side tinted/smoked - passenger/right side stock:




After:










-Don Nguyen

donathon@gmail.com
Old 04-24-2014, 09:01 AM
  #45  
Former Vendor
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Feb 2009
Posts: 7,151
Likes: 0
Received 6 Likes on 5 Posts
Default

I blacked out the chrome/brushed aluminum window trim on this black Lexus IS sedan. This car had window visors installed on the windows, but I was able to work around them without any issues. The owner of this car had me go with gloss black for the chrome window trim, so that it’d blend in with the car more. They drove out to me in Anaheim Hills/Orange County to have the work done. There wasn’t much chrome on the car to begin with, so blacking out the chrome window trim changed the look of the car quite a bit.

Before:




After:










-Don Nguyen

donathon@gmail.com
Old 07-11-2014, 10:10 AM
  #46  
Former Vendor
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Feb 2009
Posts: 7,151
Likes: 0
Received 6 Likes on 5 Posts
Default

For this black Lexus GS350 sedan, I vinyl wrapped the chrome/brushed aluminum trim around his windows, rear chrome trunk bar and front chrome grill surround in my gloss black vinyl material. We went with gloss black over matte black to have the trim pieces blend in with the rest of the black paint better. The owner of this car was from Orange County as well and drove out to me in Anaheim Hills to get the work. Getting rid of all of the chrome really cleans up the lines of the car quite a bit.

Before:








After:










-Don Nguyen

donathon@gmail.com
Old 07-15-2014, 08:05 AM
  #47  
Former Vendor
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Feb 2009
Posts: 7,151
Likes: 0
Received 6 Likes on 5 Posts
Default

On this white Mercedes Benz E350 sedan, I vinyl wrapped the roof of the car with my gloss black vinyl and also blacked out the chrome/brushed aluminum window trim with the same gloss black finish. I had some requests to post pictures of cars with roof spoilers that were left white, so here’s an example of a car that had the roof vinyl wrapped gloss black but left the roof spoiler body colored. In addition the the chrome around the window trim, I also blacked out the rear trunk chrome bar. The owner of this car drove out to me in Anaheim Hills/Orange County to have the work done.

Before:






After:
















-Don Nguyen

donathon@gmail.com
Old 07-17-2014, 06:21 PM
  #48  
Former Vendor
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Feb 2009
Posts: 7,151
Likes: 0
Received 6 Likes on 5 Posts
Default

Most of the pictures of interiors that I’ve wrapped and posted in the past were of the 3M dinoc matte carbon fiber finish. However, the owner of this BMW E46 3 series had me vinyl wrap the interior on his car in the 3M 1080 gloss carbon fiber finish. The 1080 gloss carbon is more black versus the dinoc matte carbon which is more of a grayish finish. The owner of this car drove out to me in Anaheim Hills/Orange county to have the work done. I thought the way this finish turned out on the interior went well with the car.









-Don Nguyen

donathon@gmail.com
Old 07-19-2014, 08:56 AM
  #49  
Former Vendor
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Feb 2009
Posts: 7,151
Likes: 0
Received 6 Likes on 5 Posts
Default

The owner of this blue E92 M3 has had me do several of his cars in the past before as well. This time he brought me his car to have me lightly smoke/tint the tail lights on his car. Sorry for the before/during pictures, the lighting wasn’t as good, but hopefully you can see how the tail lights look like in the after pictures. The owner of this car was around Newport Beach are and came out to me in Anaheim Hills/Orange county to have the tint work done. It’s a fairly light shade, which gives it a very factory look.

Before:




Driver/left side stock - passenger/right side tinted:


After:






-Don Nguyen

donathon@gmail.com
Old 07-21-2014, 08:53 PM
  #50  
Former Vendor
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Feb 2009
Posts: 7,151
Likes: 0
Received 6 Likes on 5 Posts
Default

I did quite a bit of work on this white Mercedes Benz C class C250 coupe. The owner of the car had me black out the chrome/brushed aluminum window trim with my gloss black vinyl material. In addition the window trim, I also lightly tinted/smoked the tail lights and blacked out the center lower portion of the front bumper in gloss black as well. Even though the car was still relatively stock, these small subtle changes still changed the look of the car quite a bit, without making it look overly modified. It’s as if it could have come from the factory this way. I believe the owner of this car was from Riverside and drove out to me in Anaheim Hills/Orange County to have the work done.

Before:








Driver/left side tinted/smoked - Passenger side stock:


After:














-Don Nguyen

donathon@gmail.com


Quick Reply: **Don Nguyen | Vinyl roof wrapping, tail light tinting, black out chrome trim install



All times are GMT -8. The time now is 01:22 AM.