AudiWorld Forums: A6 / S6 (C5 Platform) Discussion

Facelift: Updated A3 & S3 Models for 2009

World Debut: The New Audi Q5

C6 A6 Forum || RS 6 Forum || Audi A6 Pricing Info

[Reader Tips] [Search Forums] [Post Picture] [Post New Thread]

Page: [<<<] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [>>>]
Total Threads: 81577, Total Pages: 1632

"RS6 Sound Enhanced Exhaust" questions - 4Ring Jelly 2008-05-10 10:58:27 (93 views) There are two different RS6 exhausts: The normal version, and the Sound Enhanced - audikillsbmw 2008-05-10 11:26:08 (87 views) hmm, i had no idea. - 4Ring Jelly 2008-05-10 11:34:19 (51 views) The SE version was an option for the normal RS6 (and yes, I think it also - audikillsbmw 2008-05-10 11:41:08 (79 views) damn thats a bit pricey. - 4Ring Jelly 2008-05-10 11:43:11 (36 views) People on here pick them up used. They can be hard to acquire though. - audikillsbmw 2008-05-10 11:45:46 (50 views) Gotcha, thanks! - 4Ring Jelly 2008-05-10 12:02:58 (37 views) Ur welcome. And a lot of guys on here use Magnaflow mufflers. I haven't heard - audikillsbmw 2008-05-10 12:22:15 (50 views) the rs6 se exhaust is awesome - Press 2008-05-10 15:08:55 (22 views) Does that mean that it is absolutely silent, stealthy? - BernieBenz 2008-05-10 16:23:46 (17 views) not stealthy....sounds like a v8 should - Press 2008-05-10 16:47:13 (19 views) Re: not stealthy....sounds like a v8 should - Limey Dude 2008-05-12 13:19:28 (9 views) Oh, a Ford flat head! - BernieBenz 2008-05-10 17:56:55 (18 views) Uh.. Was that supposed to be a sarcastic remark? - audikillsbmw 2008-05-10 22:07:59 (21 views)
Running rich... O2 sensors or coil packs? - ePuFFy 2008-05-10 10:46:06 (36 views) Coolant temp sensor if no codes are present. - 4Driver4 2008-05-10 11:16:20 (22 views) Did that a while ago when my dash temp kept sitting down low - ePuFFy 2008-05-11 00:20:33 (12 views) How long ago? Where did the sensor come from? Cheap enough to swap it again to be sure. - 4Driver4 2008-05-11 04:52:42 (12 views) Less than 10k miles ago, got it from the dealership... thanks :) - ePuFFy 2008-05-11 19:44:52 (10 views)
air bag light is on A6 C5 2003 4.2 - Jester34x 2008-05-10 10:36:54 (40 views) Re: search there is tons on this issue - basso 2008-05-10 12:26:22 (24 views) Vag it and see what it says...Autozone can't reset that - Stampy 2008-05-10 10:42:53 (26 views)
Prepare to be amazed - 2.7tDallas 2008-05-10 10:33:49 (315 views) The inspiration? - ToolmanAR 2008-05-12 06:13:01 (67 views) vomits - schnellmb 2008-05-10 12:51:32 (37 views) Why...Why...Why does someone think thats attractive. :-(( - Audeye A6 2008-05-10 12:33:05 (36 views) Jesus.. This was just posted the other day :P :P :P - audikillsbmw 2008-05-10 11:30:26 (33 views) repost of a repost - FtWorthS4 2008-05-10 10:36:41 (55 views) bahhh - 2.7tDallas 2008-05-10 11:14:42 (28 views)
manual shift knob 2004 2.7t - wct 2008-05-10 10:24:59 (81 views) Re: manual shift knob 2004 2.7t - wct 2008-05-10 13:17:31 (52 views) hey dewd...they have this new thing on the intraweb - 2.7tDallas 2008-05-10 18:58:52 (43 views) LOL! - Edd W 2008-05-10 14:39:23 (20 views) no - 2.7tDallas 2008-05-10 10:34:09 (27 views) Huh? - audikillsbmw 2008-05-10 11:32:25 (25 views) I didn't stutter - 2.7tDallas 2008-05-10 12:44:07 (41 views)
has anyone ever ordered e-code headlights from Germany? - nemesisa6 2008-05-10 10:11:30 (37 views) I have some Ecode projectors on their way... - Stampy 2008-05-10 10:44:11 (47 views)
what kind of oil for a 2001 2.8 Avant? - nemesisa6 2008-05-10 09:09:58 (24 views) Castrol 0W-30, Mobil 1 0W-40 - schnellmb 2008-05-10 12:54:09 (35 views) Audi has a list of approved oils. Look for VW 50x.x certification. But aside from that - Just Me 2008-05-10 09:31:20 (53 views)
silly question about 2.8L engine cover - TraderAlex 2008-05-10 07:52:54 (41 views) Turn each plastic screw 1/2 turn and they will pop up, - Jefflafleur 2008-05-10 08:25:46 (25 views) Press down first.... - mpw 2008-05-10 14:40:50 (21 views) 1/4 turn ;-) - 4Driver4 2008-05-10 09:45:18 (16 views)
Anyone else using Ripway as their sig rotator? Mine quit this morning, and the - jbchinoca 2008-05-09 19:18:18 (74 views) WTF? just started up. Hasn't worked all damn day. - jbchinoca 2008-05-09 19:23:04 (25 views) Talking to yourself now? - 5speed6 2008-05-09 19:24:38 (22 views) Just so long as I don't hear or act out the answers. - jbchinoca 2008-05-10 08:58:27 (18 views) if you start that, we send you to the vtec forums. - 5speed6 2008-05-10 09:03:50 (20 views) NOOOOOOOOOOO! ANYTHING BUT THAT! - jbchinoca 2008-05-10 09:12:27 (18 views) okay...just be on your best behavior then :p - 5speed6 2008-05-10 17:33:08 (14 views) lol.. He's a crazy old bastard : ) - audikillsbmw 2008-05-09 20:49:24 (25 views) Listening to some of you guys will cause that. :) - jbchinoca 2008-05-10 08:59:53 (15 views) too much time on here might lead to that :))) - 5speed6 2008-05-09 20:56:23 (18 views) Indeed : ) - audikillsbmw 2008-05-09 20:59:15 (20 views) They're coming to take me away, haha, to the happy home, with trees, and flowers - jbchinoca 2008-05-10 09:05:18 (18 views)
Wiper problem, stops at up position - camikazi2k 2008-05-09 19:17:15 (28 views) Bad wiper motor or intermittent wiper relay. - 4Driver4 2008-05-10 05:05:59 (31 views) How hard is to replace the relay. - camikazi2k 2008-05-11 08:47:57 (10 views) Wiper works fine up and down. - camikazi2k 2008-05-10 07:53:43 (18 views) Yup. - 4Driver4 2008-05-10 10:04:39 (16 views)
The C5 cowl drain design is just plain sht..........advice needed......... - UR-Idiot Savant-S6* 2008-05-09 18:11:12 (94 views) Remove the kick panel on the right side of the foot well, pull up the plastic trim piece... - koz4.2 2008-05-09 20:35:12 (48 views) Moonroof drain - gitee 2008-05-09 20:00:46 (48 views) very possible.........top looks fine and the a-pillar is dry so maybe the bottom fell off........... - UR-Idiot Savant-S6 2008-05-10 08:26:09 (22 views) Darn, someone told me there's a TSB out on this - I'll try to email him and ask. - mustbeaudi 2008-05-09 19:41:03 (21 views) The windshield replacement may be your culprit. Check the cabin air intake - Grapeking 2008-05-09 19:03:42 (43 views) Windshield has never been replaced. Cabin filter is dry 8^( - UR-Idiot Savant-S6 2008-05-09 19:18:18 (22 views)
Searching the archives as we speak, but any experience with replacing rear wheel bearings? - absolutcq20v 2008-05-09 17:54:50 (42 views) Just take it apart and then put it back together as best you can... - Raudi_6 akaDeutschMF 2008-05-09 17:57:57 (33 views) Yup, I have a manual...but it doesn't work (Grrr) PS - Might see you at Chili Cookoff... - absolutcq20v 2008-05-09 19:57:20 (23 views)
Weekend Poll : Have you ever Street raced. - 2.7t @Altitude 2008-05-09 16:42:51 (120 views) Your honor, I'd like to plead the 5th....................... - R2.7TA6 2008-05-10 13:08:38 (28 views) plead da Fif! - EuroVWGTi 2008-05-12 18:57:02 (21 views) I was an undercover cop and raced to try and discover the leader of a truck hijacking gang - D.D. A6 Avant 2.7Tq 2008-05-10 10:03:55 (83 views) Excellent!!! - 5speed6 2008-05-10 11:08:19 (45 views) not really, and with 2.8 thats not even smart :o) - thomas1978 2008-05-10 09:18:22 (28 views) I showed a few people my taillights when Ihad the 2.8, but I had to be choosy. - jbchinoca 2008-05-10 09:25:24 (44 views) (3) [never] iostreet racing's for idiots .... take it on a track. - Jon C 2008-05-10 09:00:13 (27 views) Re: (3) [never] iostreet racing's for idiots .... take it on a track. - 2.7t @Altitude 2008-05-11 06:55:08 (28 views) please translate your post into English... - Jon C 2008-05-11 07:41:54 (25 views) Three guys in a Taurus were trying to get me to go today. - btruby 2008-05-09 21:00:25 (71 views) Yup. - audikillsbmw 2008-05-09 20:43:43 (35 views) Used to make money with a Beetle on Delaware Ave. in Philly. I have since matured... - Paracaidista2.7T 2008-05-09 19:44:44 (55 views) Me........never ;) - 5speed6 2008-05-09 19:35:45 (71 views) Well, I have been known to actually streetrace in the past, now I just kinda go fast - jbchinoca 2008-05-09 18:54:52 (46 views) late 70's Manana Street in Dallas - 2.7tDallas 2008-05-09 18:48:36 (30 views) Don't we all live our lives a quarter mile at a time? - jimmyc83 2008-05-09 17:42:14 (50 views) A win is a win, ask any street racer! - nemesisa6 2008-05-09 18:39:52 (29 views) did it when i was much younger....had a 1968 chevy nova and lots of back roads in upstate ny - Press 2008-05-09 17:19:45 (29 views) I have...back when I was a kid (<20) when I lived in the boonies. - absolutcq20v 2008-05-09 17:17:36 (50 views) Hillary's Old Man - 2.7t @Altitude 2008-05-09 17:24:30 (48 views) Everyone has & when you get older you are not so proud of doing it. - jlaws 2008-05-09 17:05:00 (31 views) Re: Everyone has & when you get older you are not so proud of doing it. - 2.7t @Altitude 2008-05-09 17:09:45 (50 views) That pretty well sums it up. AARP here as well. I hate it when some slowpoke - jbchinoca 2008-05-10 09:07:28 (32 views) Will show my age but 'Yes' back in th '70's with street racing - marioA6 2008-05-09 17:02:37 (48 views) Re: Will show my age but 'Yes' back in th '70's with street racing - 2.7t @Altitude 2008-05-09 17:16:28 (48 views) If anyone is from DC area, check out McCarthur Blvd in Pilasades! - Raudi_6 akaDeutschMF 2008-05-09 16:52:20 (46 views) Oh, and I only street race against grandmas in their Celicas - Raudi_6 akaDeutschMF 2008-05-09 16:53:19 (32 views)
Sunshade randomly started working again - rearviewsg 2008-05-09 15:02:15 (52 views) i AM SO JEALOUS - jimmyc83 2008-05-09 17:37:48 (40 views) ditto - skifast4.2 2008-05-09 19:32:34 (11 views) sounds like a bad connection - Press 2008-05-09 16:04:21 (18 views) Ding. Mine acted up once and reseating the fuse resolved it. Seems a fickle beast. - 2.7T_RT(toofast) 2008-05-09 16:39:56 (18 views) we tried that already =( - jimmyc83 2008-05-09 17:38:47 (15 views) Jimmy, did you try shaking the sunshade as someone else simultaneously presses the button? - nebalt 2008-05-09 17:43:46 (22 views) BD sat back there wiggling away while i whacked the button eleventy times - jimmyc83 2008-05-09 17:46:08 (22 views) the thought of bd "wiggling" away while you "whack" anything is disturbing.... - Press 2008-05-09 18:52:04 (22 views) 2nd.. - Kris Hansen 2008-05-10 03:42:07 (12 views)
2.7 misfire at idle and on again/off again boost - econnelle 2008-05-09 14:57:43 (51 views) i'd bring it back to vast....sounds like a coilpack to me, needs a vag com scan - Press 2008-05-09 16:08:05 (31 views) Re: i'd bring it back to vast....sounds like a coilpack to me, needs a vag com scan - econnelle 2008-05-10 13:30:50 (19 views) But it's so much more fun just helping people... - boostbuddy 2008-05-10 09:48:51 (18 views)
Door handle- feels creaky? anyone else- STFA- no luck - thxguy 2008-05-09 14:11:51 (39 views) Lithium grease maybe? Just spray the heck out of it in there? - Raudi_6 akaDeutschMF 2008-05-09 16:54:37 (25 views) I cured mine by adjusting the rod that connects the external handle to the latch. - 4Driver4 2008-05-09 15:37:56 (25 views) that sounds promising- was it a tough process? Inside the door latch or under - thxguy 2008-05-09 17:17:55 (22 views) If you remove the door panel, you can see where the rod connects to the latch. - 4Driver4 2008-05-10 05:08:06 (19 views) Re: x2 drivers side - basso 2008-05-09 15:36:10 (20 views) I'm feeling cranky...does that count? - 5speed6 2008-05-09 14:23:06 (25 views)
Engine Carbon Clean/flush - fkess 2008-05-09 13:57:11 (90 views) Try AutoRX - jasaab 2008-05-10 13:11:19 (30 views) Re: Engine Carbon Clean/flush - fkess 2008-05-10 10:03:44 (34 views) I use SeaFoam, but also heard BG44K is great. Havent done the intake yet - Raudi_6 akaDeutschMF 2008-05-09 16:58:50 (49 views) Anyone have advice on seafoam treatment to the intake? - Raudi_6 akaDeutschMF 2008-05-09 18:45:04 (32 views) Who knows. I just realized we sell it where I work though. I'm definitely going to put a - audikillsbmw 2008-05-09 20:48:25 (38 views) Yes, suck up about a 1/3 to half bottle of seafoam through one of the small - golfindaily 2008-05-09 20:47:11 (44 views) I always wonder how much the O2 sensors enjoy a good Seafoam treatment. - 4Driver4 2008-05-10 05:09:49 (31 views) if you see all the carbon fly out it def seems like its doing something and - golfindaily 2008-05-10 06:15:01 (27 views) Yeah, I just envision that carbon crap going through the cats and stickking all over the O2's. - 4Driver4 2008-05-10 09:49:04 (22 views) A can of BG44K every 15k should clean any carbon. - 4Driver4 2008-05-09 15:38:52 (29 views) i use a can of techron prior to each oil change also - Press 2008-05-09 16:04:55 (24 views) I use nothing. - 4Driver4 2008-05-09 16:20:29 (50 views) I wouldn't do this now, your miles are low, usually this would be for high mileage.. - 5speed6 2008-05-09 14:24:52 (45 views)
Late Friday afternoon POLL: DIY wash or commercial car wash or pay detailer. - 5speed6 2008-05-09 13:11:05 (85 views) Results of Poll: More than the MAJORITY here DIY wash. A++ - 5speed6 2008-05-11 14:02:22 (19 views) When I first bought it went to commercial, but now only DIY - *C5 AVANT STYLE* 2008-05-11 07:05:20 (20 views) Depends on mood, DIY or full service (brushless) car wash.............. - R2.7TA6 2008-05-10 13:11:16 (22 views) I use 3 methods: DIY, Fast Eddie's, and cheerleaders/POMS =) - audikillsbmw 2008-05-09 21:27:08 (33 views) DIY - MrFine 2008-05-09 20:12:54 (26 views) DIY - but in winter 100% hand car wash - nebalt 2008-05-09 17:46:51 (27 views) bubble bath and rubber duckie come with me. - jimmyc83 2008-05-09 17:39:49 (24 views) LOL - Raudi_6 akaDeutschMF 2008-05-09 18:46:50 (21 views) Can't wash cars at home in the ATL area - so a nice touchless carwash... - RMBA62.8 2008-05-09 17:37:52 (36 views) In DC, only 1 DIY place in 20mile radius, but I still wait in line - Raudi_6 akaDeutschMF 2008-05-09 17:01:07 (28 views) Usually DIY, sometimes use the local 100% handwash. - jbchinoca 2008-05-09 16:37:57 (27 views) DIY. No way I'd pay a detailer to do my cars.... I NEVER use commercial wash.. - Kris Hansen 2008-05-09 16:26:48 (40 views) occasionally....you or your car? - Press 2008-05-09 16:56:50 (24 views) Both? =) - Kris Hansen 2008-05-10 03:40:32 (21 views) lol - Press 2008-05-10 06:04:55 (21 views) DIY - I specifically tell my SA to NOT wash the car - FtWorthS4 2008-05-09 16:01:34 (23 views) DIY. - btruby 2008-05-09 15:52:52 (28 views) DIY - schnellmb 2008-05-09 15:35:21 (22 views) DIY - Paracaidista2.7T 2008-05-09 15:27:08 (18 views) Car wash here, will wash the car when requested, the same way as at home - Ming 2.7T 2008-05-09 15:03:20 (31 views) brushless car wash most of the time....then the detailer for the good stuff - Press 2008-05-09 14:53:21 (23 views) >>I could make a snide comment like "Brushless car washes are for girls"....but I wont't! :-P - Grapeking 2008-05-09 14:57:30 (26 views) Ahhh, U should Grapeking, remember its us against the world! From now on everything is for girls! - Raudi_6 akaDeutschMF 2008-05-09 17:24:07 (24 views) loves the girls-------> - Press 2008-05-09 17:40:10 (24 views) Long day at work, went to edit and replied on my own message =P - Raudi_6 akaDeutschMF 2008-05-09 17:25:50 (26 views) lol...no, of course you wouldn't. - 5speed6 2008-05-09 16:05:41 (28 views) did i say that at one time? in that case, my wife brings both cars to the brushless car wash....8^) - Press 2008-05-09 16:09:59 (22 views) Nice save! - 5speed6 2008-05-09 16:20:20 (23 views) thought you'd like that.... - Press 2008-05-09 16:54:35 (29 views) I LOL'd at it too. - Grapeking 2008-05-09 17:40:48 (26 views) you needed a good lol....8^) - Press 2008-05-09 17:46:39 (19 views) I only use brushless wash when Im being lazy or in a hurry. - Raudi_6 akaDeutschMF 2008-05-09 17:02:38 (23 views) Never took my Audi to drive thru car wash. I wash the car myself - audiquattroduo 2008-05-09 14:34:50 (29 views) Up until now, always drive-thru carwash, but from Tuesday onwards (after Prof. Detail) it'll be DIY - D.D. A6 Avant 2.7Tq 2008-05-09 14:15:05 (33 views) Audi: NEVER commercial wash. Always DIY. Wife's minivan: depends. I'll DIY, but - Grapeking 2008-05-09 14:09:57 (33 views) In YOUR condition...you better be payin someone!!! And not MOM!!! <lol> How's today going?? - bac2h 2008-05-09 14:07:15 (37 views) Nevaaar!! Nobody touches my car, except my sis. And, lol @ mom.. - 5speed6 2008-05-09 14:17:57 (34 views) OK, that's the second reference to 'his condition' this week. I know he's not pregnant, so - Grapeking 2008-05-09 14:11:30 (31 views) LOL..No I'm not pregnant!! I just had Knee surgery and have a long road to recovery.. - 5speed6 2008-05-09 14:15:24 (36 views) That sounds like something I'd do.. Though I'd probably do it eating a pizza.... - Kris Hansen 2008-05-09 16:24:54 (22 views) How the heck did you sprain a stomach muscle. Well get better soon. We need to ... - audiquattroduo 2008-05-09 14:36:39 (25 views) From hopping up and down the stairs with the crutches too much... - 5speed6 2008-05-09 14:44:19 (24 views) ouch! Hope you heal quickly. BTW, where in Jersey are you? - Grapeking 2008-05-09 14:33:39 (24 views) Thanks.. - 5speed6 2008-05-09 14:37:26 (28 views) ahhhh- so, if I'm down in very northern NJ am I near you? - Grapeking 2008-05-09 14:56:00 (25 views) What town or county? - 5speed6 2008-05-09 15:45:02 (22 views) around Saddle River - been there the last two weeks, again next week. - Grapeking 2008-05-09 16:18:59 (25 views) okay...roughly about 30miles/~40 minutes form me. - 5speed6 2008-05-09 16:24:03 (21 views) If you've got time, DIY all. If not, pay detailer and than DIY wash (or else your money is wasted). - SouthboroAudiGuy 2008-05-09 13:42:53 (30 views) If it's an option, DIY. For those of us with no time...PAY DETAILER! - MN A6 Avant 2008-05-09 13:29:25 (33 views) DIY only - Jon C 2008-05-09 13:17:41 (32 views) DIY 75% commercial 25% - NoProblem 2008-05-09 13:16:24 (33 views) DIY with Mezerna... - boostbuddy 2008-05-09 13:15:29 (31 views) DIY @home (spring, summer, fall) but commercial wash (winter) - Boston Driver 2008-05-09 13:14:47 (35 views) DIY for me - thomas1978 2008-05-09 13:12:31 (32 views) Always DIY. - 5speed6 2008-05-09 13:11:50 (36 views) 2nd - absolutcq20v 2008-05-09 15:14:25 (21 views)
100mph + rock = - 40v-V8 2008-05-09 13:09:27 (391 views) My insurance lesson...might help that crater... - Kwatro 2008-05-09 17:40:57 (61 views) You may be able to get that fixed without replacing the window, believe it or not - Raudi_6 akaDeutschMF 2008-05-09 17:04:30 (27 views) 100 mph with no Turbo ! - 2.7t @Altitude 2008-05-09 16:25:00 (58 views) Just a minor fleshwound! - Ming 2.7T 2008-05-09 15:07:40 (25 views) It could have been worse--it could have damaged your new clear corner. - audiquattroduo 2008-05-09 14:38:04 (29 views) Lucky on the position. Not the most stressed part. I had one like that in the middle once - D.D. A6 Avant 2.7Tq 2008-05-09 14:17:19 (35 views) Look at the bright side - PKing688 2008-05-09 14:14:07 (39 views) wonder if that would have been worse if it were in the middle of the windshield -away from support? - Grapeking 2008-05-09 14:12:36 (27 views) Purdy!! Look like a golf ball hit it. - 5speed6 2008-05-09 13:13:49 (26 views) insurance will take care of that ;o) - thomas1978 2008-05-09 13:10:17 (30 views) ...as long as he leaves that 100mph part out. :P - absolutcq20v 2008-05-09 15:15:20 (27 views) i think he means 100kph....8^) - Press 2008-05-09 16:10:49 (23 views) ^^^^what he said - Press 2008-05-09 13:11:17 (29 views) yea, thats what a said - thomas1978 2008-05-09 13:11:44 (30 views)
Boy, it sure has changed since Bac2h defected. 12:30 PDT, and still no TGIF Poll. - jbchinoca 2008-05-09 12:36:45 (25 views) :^O Maybe he's stuck in the cr@pper...can someone swing by his office and make sure he's okay? - Boston Driver 2008-05-09 13:03:27 (16 views) He already left his mark.... - Kris Hansen 2008-05-09 12:46:01 (18 views) PEEE EWWWWW....Do NOT go in there!!!!! It has been crazy busy @ work, Chardonnay time NOW!!! - bac2h 2008-05-09 14:09:15 (15 views) You could have used this post to make one ;) - 5speed6 2008-05-09 12:37:49 (18 views) 2nd. One more hour till 5pm EDT. Still have some time. - NoProblem 2008-05-09 13:02:03 (14 views)
MTM RS6 trying to race in St. Paul, MN - MN A6 Avant 2008-05-09 11:04:25 (194 views) Once I get to Stage3 I will never back down from any race, except maybe a RS6 - Raudi_6 akaDeutschMF 2008-05-09 17:07:54 (32 views) A healthy Stg3 will walk on an MTM RS6. About 2 lengths in a 1/4, FYI. :) - Li3ny 2008-05-11 07:11:08 (14 views) Get up under him, get him loose and put him into the wall... - Steen2 2008-05-09 13:32:41 (23 views) He was picking on the "little guy". - 5speed6 2008-05-09 12:43:16 (24 views) If he'd have been taunting an M5 or an E63 I'd give him some credit! - MN A6 Avant 2008-05-09 13:08:44 (19 views) Yeah, I'd say that would be a fair match. - 5speed6 2008-05-09 19:54:30 (15 views) yeah, but does he know how much stuff you can get in your trunk!!...LOL - JetTech 2.7T 2008-05-09 11:15:53 (24 views) You should have just raced him. Not like he'd notice the difference between racing and crusing... - Kris Hansen 2008-05-09 11:15:33 (65 views) Re: You should have just raced him. Not like he'd notice the difference between racing and crusing.. - 2.7t @Altitude 2008-05-09 16:34:26 (35 views) Really? I kind of like handing owners of other brands a slice of humble pie... - Kris Hansen 2008-05-09 16:37:28 (34 views) Re: Really? I kind of like handing owners of other brands a slice of humble pie... - 2.7t @Altitude 2008-05-11 06:58:10 (15 views) Rav4 lol. - btruby 2008-05-10 19:38:03 (11 views) Hmm. LIghter car, with more power. Yeah, big surprise it's quick off the line... - Kris Hansen 2008-05-11 06:29:34 (14 views)
Im about to change my spark plugs today, what do you guys think of NGK Iridium plugs over the OEM? - blAck6 (desairs) 2008-05-09 10:30:12 (45 views) Correct me if Im wrong, but plugs only differ in their heat tolerance? - Raudi_6 akaDeutschMF 2008-05-09 17:09:42 (33 views) You said but(t) plugs! - 2.7T_RT(toofast) 2008-05-09 19:51:31 (21 views) I just changed mine and put in the NGK platinum plugs. No problems - audiquattroduo 2008-05-09 14:40:07 (19 views) i got Bosch platinum 2+ - thomas1978 2008-05-09 13:11:16 (27 views) I used those as well. - btruby 2008-05-09 15:53:59 (22 views) Sure, why not. - 5speed6 2008-05-09 12:39:23 (18 views) My a could not tell the difference between iridium and platinum in the 4.2...2.7 c/b different.. - bac2h** 2008-05-09 10:51:08 (37 views) you put them in your a????? - Kris Hansen** 2008-05-09 10:54:54 (62 views) So you complain when I don't post and now ridicule me when I do..<sniff..sniff>... - bac2h 2008-05-10 04:23:50 (14 views) Hey, I'm not the one who puts spark plugs in my a$$.... - Kris Hansen 2008-05-10 17:18:21 (15 views) It lights off leftover gases in his butt before being released to the atmosphere. - jbchinoca 2008-05-09 12:34:01 (23 views) i've heard rumors methane works better than ras gas... - jimmyc83 2008-05-09 11:31:00 (19 views) Let's just hope his compression ratio is not too high - FtWorthS4 2008-05-09 11:20:23 (15 views) Sometimes my compression is VERY high <lol> just ask my wife.. - bac2h 2008-05-10 04:25:16 (14 views) ROTFLMFAO!!!!! HOF nomination. - 2.7T_RT(toofast) 2008-05-09 11:12:01 (33 views) 2nd - JoeVane 2008-05-09 11:18:49 (15 views) HAHA - EdTheKilla6 2.7 2008-05-09 11:09:51 (16 views) lol - audikillsbmw 2008-05-09 11:07:53 (22 views) X2 teh lol! - Smokey Bear 2008-05-09 14:45:33 (15 views) Yes - FtWorthS4 2008-05-09 10:38:25 (21 views)
Fess up - FtWorthS4 2008-05-09 10:22:06 (453 views) OMG! Have Mercy! Poor audi, someone call the U.N. - mezonesxbox 2008-05-09 21:12:10 (22 views) You know, without that pimple on the hood, that car - shwee 2008-05-09 20:15:05 (44 views) I actually thought that was a really, really low mailbox. rofl - endlessRR 2008-05-09 20:27:01 (25 views) Hangs head in shame : (( that was the 1st iteration of my mod process - Ming 2.7T 2008-05-09 15:11:03 (143 views) LMAO, Mr Jones' ride - Raudi_6 akaDeutschMF 2008-05-09 17:12:21 (25 views) You get my email re: buttonwillow? - Robert Gedeon 2008-05-09 15:45:27 (27 views) no have not received email. toyo guy said he would mail out some stuff - Ming 2.7T 2008-05-11 20:25:50 (17 views) It looks almost like my 4.2 but I don't have the blower---NOOOOOT - audiquattroduo 2008-05-09 14:41:32 (25 views) i almost puke - thomas1978 2008-05-09 13:09:30 (25 views) Is that a mailbox on the hood? - 5speed6 2008-05-09 12:35:59 (31 views) OK. THAT got a LOL. - SouthboroAudiGuy 2008-05-09 13:41:23 (21 views) no taste, and no class - Press 2008-05-09 12:13:27 (27 views) I heard that thing is a blown 4.2 making like 575HP - Robert Gedeon 2008-05-09 12:03:21 (71 views) lol - audikillsbmw 2008-05-09 12:28:08 (24 views) LOL....too funny! - Grapeking 2008-05-09 12:07:27 (20 views) Horrible - JimFerraro 2008-05-09 11:43:08 (30 views) crazy canadians....this is what we get for giving them Internet money! - jimmyc83 2008-05-09 11:31:43 (39 views) Hey, I'm Canadian! What is that supposed to mean? - A6EX 2008-05-09 12:35:22 (27 views) Yeah! What's this all "Aboot" ? - JimFerraro 2008-05-09 14:18:31 (25 views) Re: Yeah! What's this all "Aboot" ? - Smokey Bear 2008-05-09 14:47:20 (32 views) That's all Internet money will buy! :) - April/Verdegrrl 2008-05-09 12:01:07 (27 views) REPOST (though it's still as amusing as the first time I saw it.) - audikillsbmw 2008-05-09 10:49:05 (32 views) must of missed it - apologies - FtWorthS4 2008-05-09 10:58:16 (30 views) Yup... I posted it a while ago, but good for another laugh. Here are some more pictures... - koz4.2 2008-05-09 16:05:20 (47 views) hit. - A6turbo530 2008-05-09 10:43:24 (46 views) Is that a C5...? Can't even tell.... - Devil_Inside 2008-05-09 10:39:30 (32 views) PHEW! The color is nice though! - A6EX 2008-05-09 10:28:23 (27 views) i think thats BDs, he ran out of stuff to do to his car so he went a little crazy lol... - blAck6 (desairs) 2008-05-09 10:26:24 (52 views) No (wrong color), but BD should definitely look into those body panels... - SouthboroAudiGuy 2008-05-09 10:47:05 (45 views) If he did that himself man he is skilled. That being said wtf was he thinking? - trapped 2008-05-09 13:06:47 (27 views) Dont Laugh.... - 2.7t @Altitude 2008-05-10 05:37:46 (25 views)
Can you see my signature? I can't. - A6EX 2008-05-09 08:50:13 (101 views) How long have you had the Unitronic tuning, & how has it been? - 5speed6 2008-05-09 12:41:17 (23 views) I had it for a year now. Power is great, peak at 19PSI taper to 17PSI... - A6EX 2008-05-09 12:48:34 (34 views) Got any more pics of the car? Looks good. - 2000 A6 2.7t 6m 2008-05-09 10:55:53 (30 views) Thanks, here's a rear view - A6EX 2008-05-09 11:04:53 (131 views) Very clean, those wheels look great with your paint coat, also amber fogs and corners is cool - Raudi_6 akaDeutschMF 2008-05-09 17:39:56 (19 views) Nope - audikillsbmw 2008-05-09 09:47:27 (21 views) The requested URL /a6/msgs/RIEGER-FRONT-SIGNATURE.jpg was not found on this server. - jimmyc83 2008-05-09 08:52:52 (31 views) Thanks, but its off my hard drive. Now what? - A6EX 2008-05-09 09:37:21 (18 views) also this link will help - jimmyc83 2008-05-09 08:56:24 (41 views) Thank You, I used that and got this result... - A6EX 2008-05-09 09:39:07 (29 views) thats because you are linking to a dead link... - jimmyc83 2008-05-09 09:55:58 (26 views) You Da Man! Thanks! - A6EX 2008-05-09 10:09:29 (25 views) nice sig, q for you...did you have someone custom fabricate the RS6 sideskirts? - jimmyc83 2008-05-09 11:32:58 (22 views) I got them from LLTEK, they are replicas, not the real deal - A6EX 2008-05-09 12:19:25 (25 views) Would like to know where you got your upper grill, looks great. - JetTech 2.7T 2008-05-10 09:07:06 (15 views) Its an ABT grille I got off the mighty flea bay. No more available. - A6EX 2008-05-12 06:29:03 (10 views)
my 2000 2.7t climate control panel is frozen....i tried to search....can someone help...do i need to - audi2.7audi 2008-05-09 08:41:26 (27 views) im replacing mine soon, if you are interested - jimmyc83 2008-05-09 09:00:01 (24 views) sure - but why are you replacing it? - audi2.7audi 2008-05-09 09:03:34 (18 views) replacing with 02+/AR unit to match my RNS-E faceplate - jimmyc83 2008-05-09 09:04:29 (25 views) cool - i just sent you an email - audi2.7audi 2008-05-09 10:01:46 (10 views)
A6 Avant 2.8 vs 3.0 and Issues to Watch out For? - urqaudi 2008-05-09 08:14:23 (72 views) Re: A6 Avant 2.8 vs 3.0 and Issues to Watch out For? - eelstx 2008-05-13 13:04:56 (5 views) I can speak for the 2.8 Avant - I've had 2 - another green avant 2008-05-09 12:27:17 (96 views) 3.0 if properly serviced. - schnellmb 2008-05-09 09:32:49 (54 views) I'd stay away frrom the 3.0 - 4Driver4 2008-05-09 08:34:28 (90 views) The 3.0 also doesn't leak as much as the 2.8, and is much faster (as snails go) :) - Raoul 2008-05-09 09:07:53 (39 views) I have the 3.0 and its great imho. If you want a v6 without the issue of turbos its the way to go. - blAck6 (desairs) 2008-05-09 10:20:49 (35 views) 2nd: 3.0L @ 50k miles and no issues (knock on wood). Still wish I had 2.7T 6MT - NoProblem 2008-05-09 10:32:15 (27 views) Glad to hear you guys are happy with your cars, but 50k trouble free miles... - 4Driver4 2008-05-09 11:32:55 (54 views) how many people here trade HP for reliability? - NoProblem 2008-05-09 13:00:24 (36 views) I'm the opposit. I buy the cars you sell. - 4Driver4 2008-05-09 13:08:00 (32 views) Re: I'm the opposit. I buy the cars you sell. - urqaudi 2008-05-09 13:28:38 (38 views) Not sure if it was mentioned, but some avants rust along the roof rails. Watch out for that. - 4Driver4 2008-05-09 15:45:34 (26 views) 2nd - our first one did that - no signs of it on the 2nd. - another green avant 2008-05-10 13:53:45 (9 views) I'm pretty happy w/ my 2.8 engine, however don't have the avant yo're asking about. - Whitjr 2008-05-09 08:17:17 (50 views)
let me tell you, I freaking love this car....... - 40v-V8 2008-05-09 07:12:40 (337 views) 14hrs. - tozoM8 2008-05-10 20:00:17 (57 views) How was your oil level? - Raudi_6 akaDeutschMF 2008-05-09 17:13:45 (21 views) Not bad, not bad...looking forward to pics. - 5speed6 2008-05-09 12:32:22 (24 views) I presume you mean "decimated", in which case I guess you mean you reduced it by 10%? - LuvnhatemyA6 2008-05-09 10:07:53 (57 views) Nice : ) - audikillsbmw 2008-05-09 09:40:03 (42 views) please no wwp of the desimated toilet. - jimmyc83 2008-05-09 08:58:45 (50 views) C'mon we need proof...he's gotta back up the claim..or no "brownie" points. - 5speed6 2008-05-09 12:31:15 (23 views) Meh, AWD is keeping you back. I averaged 28.x MPG in my v8 CLK - halik 2008-05-09 07:53:24 (89 views) Those are weak records, then again, I live in the west with deserted straight roads - MarkW 2008-05-09 08:18:09 (80 views) :-p - FixedWing 2008-05-09 09:06:00 (184 views) 300kph = 186 mph. From the 307 in the center, you are about 191. WOW! What was the Porsche? - MarkW 2008-05-09 10:24:20 (42 views) 996 Turbo - FixedWing 2008-05-09 11:28:29 (107 views) Local Porsche planning for 220 mph. Audi 200 mph. - JimtheDentist 2008-05-09 12:36:58 (44 views) 301? - NoProblem 2008-05-09 10:33:43 (30 views) 150 on your VFR750-what did that feel like? - Grapeking 2008-05-09 09:03:53 (44 views) Smooth as glass! It had more in it, but I had enough that day. Bike never felt light at all. - MarkW 2008-05-09 10:19:12 (33 views) First and foremost shens on RC30 hitting 150 - halik 2008-05-09 08:27:13 (68 views) 3 red bulls....weak - Press 2008-05-09 07:22:45 (56 views) well, they were the 16oz size - 40v-V8 2008-05-09 07:31:59 (53 views) still weak - Press 2008-05-09 08:19:01 (44 views) fewer pitstops ftw! - Audi2Ody 2008-05-09 08:38:13 (44 views) he's with the family so i'm sure there were plenty of pitstops - Press 2008-05-09 12:15:47 (26 views) How much oil did your burn? - Raudi_6 akaDeutschMF 2008-05-09 07:16:20 (61 views) not sure, checking in a bit - 40v-V8 2008-05-09 07:30:41 (76 views) that's a 75mph AVG for nearly 15 hours - pretty darn impressive. Please don't - Grapeking 2008-05-09 07:15:44 (123 views)
Ignition control module....don't have my eBahn on work laptop... - jfk92 2008-05-09 06:20:06 (24 views)
Puddle under left fender - mx5s6 2008-05-09 06:07:02 (44 views) Washer fluid, likely leaking from the headlight washer pump... - Boston Driver 2008-05-09 07:31:08 (43 views) Should have color, no? - Just Me 2008-05-09 08:09:57 (21 views) Sometimes hard to tell on driveway surface... - Boston Driver 2008-05-09 12:26:11 (20 views) Where does A/C condensation go? - Just Me 2008-05-09 07:02:02 (20 views) It comes out near the trans. - audikillsbmw 2008-05-09 09:49:18 (14 views) Oh yea, seen that. - Just Me 2008-05-09 11:27:18 (14 views) windshield washer fluid - another green avant 2008-05-09 06:39:15 (28 views) own a dog?! :/ - jfk92 2008-05-09 06:21:06 (20 views)
Air con problem - melecerties 2008-05-09 04:37:26 (39 views) VAG-COM is your friend. - 4Driver4 2008-05-09 05:14:43 (30 views)
Where would I look to find a 2nd hand (non-stock) A6 exhaust ? - VR_Life 2008-05-09 03:53:59 (41 views) have a shop make a custom one for you.... - Press 2008-05-09 05:37:08 (25 views) Boocoo bucks!! - 5speed6 2008-05-09 06:46:17 (23 views) whats boocoo bucks? - jimmyc83 2008-05-09 09:00:37 (18 views) beaucoup d'argent - D.D. A6 Avant 2.7Tq 2008-05-09 09:49:25 (18 views) meh, bout tree fiddy isn't beaucoup d'argent =P - jimmyc83 2008-05-09 09:57:46 (15 views) I had midas bend me a 2 1/2 inch exhaust from cats to muffler. I think it was about $300 - EdTheKilla6 2.7 2008-05-09 07:25:18 (28 views) Using stainless steel tubing? - 5speed6 2008-05-09 12:36:58 (20 views) Check local indy shops as well, the MAY have something laying around or can connect you - Raudi_6 akaDeutschMF 2008-05-09 05:27:32 (22 views) A/W classifieds/Ebay/other forum classifieds. - 5speed6 2008-05-09 05:08:59 (20 views)
Interior overhead light issue - Stampy 2008-05-09 02:01:51 (54 views) I have the same issue in my wife's S6. Once in a while the interior/map lights will work but most - thetatau87 2008-05-09 10:06:28 (21 views) So I was messing around with it today.... - Stampy 2008-05-09 13:36:22 (21 views) Have you checked the function of all the latch switches? Start there. - 4Driver4 2008-05-09 15:58:56 (16 views) "VAG is showing nothing." Where did you look? - 4Driver4 2008-05-09 05:16:10 (32 views) Similar problem with overhead lights - StarryTripper 2008-05-10 22:47:31 (14 views) ok, now its speed sensitive??? - Stampy 2008-05-11 16:10:47 (11 views)
Paging>02 Silver Arrow, need update if your Koni FSD set up, has it dropped anymore. Previous - JetTech 2.7T 2008-05-08 23:36:56 (25 views) I will go measure in a little bit. I did not get to park next to the entrance today - 02 Silver Arrow 2008-05-09 07:45:06 (17 views) 26.25 rear 25.75 front far less wheel gap then in my sig! - 02 Silver Arrow 2008-05-09 08:27:48 (17 views) Thx, Silver Arrow, all in all do you like your FSD set up? - JetTech 2.7T 2008-05-09 11:12:59 (17 views) very much I have the look I wanted lower but not slammed - 02 Silver Arrow 2008-05-09 11:54:12 (16 views) Exactly where I'm at with 100,000 on the odometer, want the car to have a more aggressive stance... - JetTech 2.7T 2008-05-09 15:05:50 (16 views)
Can you replace just the rear valence and not the whole bumper on a 2000 A6 2.7? - golfindaily 2008-05-08 22:05:20 (43 views) Stick with stealth exhaust, APR sells a cat-back with hidden-tips, but they still show well - Raudi_6 akaDeutschMF 2008-05-09 05:28:39 (32 views) stealth exhaust is for girls - Press 2008-05-09 05:38:38 (53 views) :P - audikillsbmw 2008-05-09 09:34:56 (23 views) wow. lol - jimmyc83 2008-05-09 08:33:25 (16 views) 2nd!! - EdTheKilla6 2.7 2008-05-09 07:27:03 (17 views) LOL, didnt know it was gender specific, but to each their own, I personally like it - Raudi_6 akaDeutschMF 2008-05-09 06:26:51 (36 views) or those of us who have kept the stock look. - Grapeking 2008-05-09 05:46:10 (24 views) Hey Grapeking, guess its us against the world =P - Raudi_6 akaDeutschMF 2008-05-09 07:36:47 (24 views) I guess so - I'm OK with that! - Grapeking 2008-05-09 11:01:10 (19 views) says the guy with the fk grille :p - jimmyc83 2008-05-09 08:57:54 (19 views) Yes, I do like my FK grille, but its not a permanent mod. But at least its unique to the Audi crowd. - Raudi_6 akaDeutschMF 2008-05-09 17:18:45 (20 views) only meant it as a "keeping stock look" reference =) no harm intended! - jimmyc83 2008-05-09 17:49:08 (17 views) No harm done, JC, may I call you that, JC? But I was just goin on a tangent about my philosophy - Raudi_6 akaDeutschMF 2008-05-09 18:01:58 (16 views) NO. You need a whole new bumper or just cut it. A good shop should do it well - trapped 2008-05-08 22:07:13 (27 views)
Public praise for Press: - mustbeaudi 2008-05-08 20:30:20 (120 views) For what? Did he sell you the AR? - Raudi_6 akaDeutschMF 2008-05-09 07:02:23 (19 views) I can sell you the AR - or the S6. The link thanks DP for looking at a different car in IL for me. - mustbeaudi 2008-05-09 07:48:48 (16 views) Oh, I see, good person to do that for you. - Raudi_6 akaDeutschMF 2008-05-09 17:20:18 (13 views) Yes. Now I need to repay the favor. How depends upon if I go to IL to buy it or not, I guess. - mustbeaudi 2008-05-09 19:33:44 (13 views) you're welcome....let me know how it turns out - Press 2008-05-09 05:30:09 (22 views)
I bet BD and a couple of others have been suffering from AW withdrawal tonight while - Grapeking 2008-05-08 20:21:40 (82 views) I was on AWOT and Motorsports for a while last night, as well as cruising here. - jbchinoca 2008-05-09 05:55:21 (11 views) It was down? I haven't been home since 2:30 :P - audikillsbmw 2008-05-08 20:48:30 (15 views) didn't know the site was down - Press 2008-05-08 20:27:50 (17 views) I assumed it was - no new posts between 19:~ hours and ~22:00? - Grapeking 2008-05-08 20:29:41 (17 views) Did not notice...just finished watching Survivor and CSI on DVR... - Boston Driver 2008-05-08 20:24:20 (38 views) BTW, that Survivor dude got totally abused.... - Grapeking 2008-05-08 20:34:12 (23 views) Manana for sure - pm? What time is good for you? I have to get the car - Grapeking 2008-05-08 20:32:35 (20 views)
Check it out, I just rebrushed the shift bezel and then brushed the little metal cylinder... - blAck6 (desairs) 2008-05-08 19:36:05 (331 views) How hard is it to pop that out? Mine looks fine, but I think I prefer the brushed aluminum look - Raudi_6 akaDeutschMF 2008-05-09 17:29:17 (27 views) It's pretty easy to remove. You have to be careful though.. - audikillsbmw 2008-05-09 20:57:17 (21 views) Yup. - carbonLORD 2008-05-08 21:35:10 (214 views) So is it really alluminum?? Does it have to be clear coated? - mezonesxbox 2008-05-08 20:58:12 (32 views) No need to clear coat at all. Mine looks great after more than a year. - Eric 2.7 2008-05-09 04:28:43 (25 views) I didn't clear coat mine. No problems so far.. - audikillsbmw 2008-05-08 21:20:48 (29 views) Rebrushed the shift bezel and the little metal cylinder... - A6S4 2008-05-08 19:49:54 (67 views) just a sanding bar, one with 80 grit paper adn the other with 320. I started with the 80.. - blAck6 (desairs) 2008-05-08 20:04:25 (59 views) Before you clear coat it, one suggestion from the peanut gallery... - Boston Driver 2008-05-08 20:27:40 (194 views) Agreed I saw a few multi-directional scratches on the photo, that stuff bugs me. JMHO - Audeye A6 2008-05-09 08:19:47 (20 views)
AP Racing BBK - already STFA - Quatroad 2008-05-08 19:18:23 (46 views) I've got a Stasis Kit from my S6 I'll make you a deal on. - JimtheDentist 2008-05-09 12:24:51 (24 views) ygm - Quatroad 2008-05-09 15:08:21 (13 views) I'd assume the Stoptech kit would fit under 17's as well. - audikillsbmw 2008-05-08 20:50:51 (18 views) yes, the ST-40, but I'm specifically looking for users of the AP Racing setup. - Quatroad 2008-05-08 20:53:50 (16 views) Ah. - audikillsbmw 2008-05-08 21:18:28 (19 views)
Finally got a picture for my sig. What do you guys think? - blAck6 (desairs) 2008-05-08 12:02:26 (283 views) Find a different background and shoot it from an angle, in my opinion. Nice ride though, - Raudi_6 akaDeutschMF 2008-05-09 07:12:21 (19 views) Here's a retouch... - SouthboroAudiGuy 2008-05-08 14:06:00 (279 views) red x? - Press 2008-05-08 14:07:03 (29 views) ? - SouthboroAudiGuy 2008-05-08 14:07:49 (30 views) He meant to say YSATI - carbonLORD 2008-05-08 14:36:57 (41 views) yeah....that's it....ysati....8^) - Press 2008-05-08 16:12:21 (26 views) Yes I do! - SouthboroAudiGuy 2008-05-08 16:27:19 (31 views) there ya go....all better now - Press 2008-05-08 16:34:31 (23 views) I made it moAr funner. - carbonLORD 2008-05-08 12:39:59 (303 views) Very nice... Can you put this guy behind the wheel? - koz4.2 2008-05-08 18:00:30 (119 views) Cool! Makes it look like he's drifting :P - jlaws 2008-05-08 12:46:19 (27 views) Tires need a bit of blur, but the rest is good! - April/Verdegrrl 2008-05-08 12:45:22 (30 views) Best I was willing to do in 5 min ;) - carbonLORD 2008-05-08 12:56:48 (28 views) wow thanks i like that one better. - blAck6 (desairs) 2008-05-08 13:02:44 (27 views) Grab it and use it before I take it off my pic poster then. - carbonLORD 2008-05-08 13:06:20 (41 views) yes im the 100th person!!! - blAck6 (desairs) 2008-05-08 13:12:17 (24 views) not bad... - Boston Driver 2008-05-08 12:14:31 (94 views) all excellent comments..the flipped down visor bothered me immediately. - 5speed6 2008-05-08 19:49:23 (15 views) BD coming in with Intro to Photography-101! ;-) - *C5 AVANT STYLE* 2008-05-08 12:28:22 (29 views) lol.. Ur such a crackhead BD. - audikillsbmw 2008-05-08 12:22:50 (37 views) thanks for the suggestions, I'm glad you pointed those things out. Im going to... - blAck6 (desairs) 2008-05-08 12:19:43 (47 views) BD knows what he is talking about. Here is a sample.. - jlaws 2008-05-08 12:40:00 (162 views) Nice.. Try to get more of an angle on the car, so we can see the rest of it.. =) - Kris Hansen 2008-05-08 12:13:50 (29 views) Looks nice : ) You need to replace/modify your lower grille though.. - audikillsbmw 2008-05-08 12:10:23 (36 views) yeah i know i just have not had time. - blAck6 (desairs) 2008-05-08 12:18:43 (30 views) What made you guys go with the - raddox 2008-05-08 12:34:17 (35 views) Paint shop? I want to do the same, the chrome is oxidized beyond reapir, replace - Raudi_6 akaDeutschMF 2008-05-09 07:14:19 (21 views) I don't know..Personal preference I guess. - audikillsbmw 2008-05-08 12:43:43 (30 views) Well it looks good regardless.... - raddox 2008-05-08 12:52:01 (30 views) Thanks : ) - audikillsbmw 2008-05-08 20:52:37 (16 views) I have seen some of the links for installing the RS6 grill - raddox 2008-05-08 13:14:17 (31 views) I think you emailed me and i sent you a link back. Good Luck - blAck6 (desairs) 2008-05-08 13:24:43 (26 views) yeah its a pain and i did the black one because of audikills lol - blAck6 (desairs) 2008-05-08 13:02:20 (23 views)
Well, it was close (at the front), but the 245/35/ZR19's fit on my 2.7T narrow body - D.D. A6 Avant 2.7Tq 2008-05-08 10:30:08 (340 views) I like it!! Have you considered rolling the fenders, check out 4induktion.com for the tool - Raudi_6 akaDeutschMF 2008-05-09 06:40:19 (26 views) Don't know what "rolling the fenders" means, but I think I won't want to do it ;-) - D.D. A6 Avant 2.7Tq 2008-05-09 07:03:20 (24 views) It's actually very safe and done by alot of Audi/VW owners to fit wider tires - Raudi_6 akaDeutschMF 2008-05-09 07:23:55 (60 views) I'm still not sure what's actually going on there - D.D. A6 Avant 2.7Tq 2008-05-09 07:28:40 (25 views) Or if you have larger/wider wheels and tires, not necessarily just for xtrm drops - Raudi_6 akaDeutschMF 2008-05-09 07:40:23 (22 views) Nice! - drew2.7T 2008-05-08 18:13:02 (33 views) Looks great. - SouthboroAudiGuy 2008-05-08 14:09:46 (36 views) looks good - Press 2008-05-08 11:05:23 (45 views) Looks good indeed, what offset and width? - Limey Dude 2008-05-08 11:54:44 (51 views) ET35, wheels are 19x8. A few here thought the RS6 19x9 (also ET35) could be a problem - D.D. A6 Avant 2.7Tq 2008-05-08 12:01:42 (53 views) His video lists the offset as et35. - audikillsbmw 2008-05-08 11:59:30 (40 views) Hi Johnny B a quick question about your pic post.... - Limey Dude 2008-05-08 12:41:43 (48 views) My wheels are 18x 8.5", with an offset of 30. I don't have spacers (though - audikillsbmw 2008-05-08 12:45:52 (52 views) I have those same wheels, but I don't have the cool 4.2 fender flares, 2.7T FTL : ( - DoubleTrouble 2008-05-08 18:49:53 (39 views) Yup. Flares FTW : ) - audikillsbmw 2008-05-08 20:53:55 (29 views) that is the same gap space i have on my car as well now. - EuroVWGTi 2008-05-08 10:55:24 (44 views) Nice : ) - audikillsbmw 2008-05-08 10:41:02 (42 views) seeing the video that gap is scaryyyy - jimmyc83 2008-05-08 10:37:59 (58 views) Dude that installed them said that's a reasonable gap, he did one BMW that had a 2mm gap - D.D. A6 Avant 2.7Tq 2008-05-08 10:43:05 (42 views) thank AoG that those things don't flex much at all! - jimmyc83 2008-05-08 10:48:01 (40 views) What is that "thing" called btw, my description "metal sticky out thing" is a bit vague ;-) - D.D. A6 Avant 2.7Tq 2008-05-08 11:01:30 (43 views) vague, but on point! - *C5 AVANT STYLE* 2008-05-08 11:10:05 (40 views)