AudiWorld Forums: yeah, I was concerned about that as well, but it seems to have worked

First Showing: Audi A5 / S5 Cabriolet

LA Auto Show 2008: Audi Falls Flat in Season's Final Show

AudiWorld Exclusive: Truth in 24 Documentary at AFI Fest

C6 A6 Forum || RS 6 Forum || Audi A6 Pricing Info

[Thread] [Post Followup] [Post Picture] [Search Forums] [A6 / S6 (C5 Platform) Discussion]

yeah, I was concerned about that as well, but it seems to have worked

Posted by: Grapeking on 2008-08-07 04:09:33
Account #: 18685

In Reply to: Whatever works, but tearing the front end apart can introduce other issues. posted by 4Driver4 on 2008-08-07 04:01:22

out fine (then again I was cautious). You know what I had the most issues with? Those really nifty radiator hose clamps - on reinstallation, I thought mine were secure, only to have the lower one pop off over 300 miles later - lesson learned is to tug REALLY HARD on them and to ensure the latch is properly engaged. Took me several tries before getting right -and each time I thought it was on.

Thread:

quick question: A6 radiator removal on a 2.8... - computrtutr 2008-08-06 17:22:00 (95 views)

Drive it into a wall, then buy a 2.7T with your insurance claim check - Raudi_6 akaDeutschMF 2008-08-07 13:28:21 (51 views)

Looking for trouble. Service position FTW. I hope you plan on checking the trans fluid. - 4Driver4 2008-08-06 21:03:46 (51 views)

You know more about this than I ever will but I understand his point. Now that - Grapeking 2008-08-07 03:57:29 (57 views)

Whatever works, but tearing the front end apart can introduce other issues. - 4Driver4 2008-08-07 04:01:22 (53 views)

yeah, I was concerned about that as well, but it seems to have worked - Grapeking 2008-08-07 04:09:33 (44 views)

It helps if you snap the clip back into place before you shove the hose on. - 4Driver4 2008-08-07 04:49:00 (45 views)

Good tip - trust me, I'll remember that. No fun having your coolant light suddenly - Grapeking 2008-08-07 05:08:23 (44 views)

Yikes. When mine popped off it was close to home, but pretty spectacular... - 4Driver4 2008-08-07 05:15:42 (49 views)

I'll tell you the rest of the story when I see you at the Sept GTG. BTW, has that date been set? - Grapeking 2008-08-07 06:53:57 (33 views)

Not sure. GBW is on vacation this week and next. He'll probaby get going when he returns. - 4Driver4 2008-08-07 07:02:06 (34 views)

Spoke to Margaritas today, should have a confirmed date Friday... - GBW 2008-08-07 13:15:51 (32 views)

excellent. Looking forward to it. - Grapeking 2008-08-07 17:31:31 (32 views)

When I pulled my rad, I unbolted those trans lines and plugged them with rubber stoppers. - audikillsbmw 2008-08-06 18:43:45 (44 views)

Any problems since, or any extra steps? - computrtutr 2008-08-06 18:47:37 (40 views)

eh.. I lost a little fluid, but I plan on topping it off soon anyways. - audikillsbmw 2008-08-06 18:55:19 (51 views)

why are you removing the radiator? That stays in place with the lock carrier. - Grapeking 2008-08-06 17:45:55 (38 views)

Re: why are you removing the radiator? That stays in place with the lock carrier. - computrtutr 2008-08-06 18:46:14 (67 views)

OK I get it. Here's what to do: unbolt the top tranny line and plug it on both - Grapeking 2008-08-06 19:14:57 (53 views)

Any idea what size (bolt) I need to plug that with? - computrtutr 2008-08-06 19:25:07 (40 views)

roughly i/4 inch diameter. But, better to use something that will really seal it, like a - Grapeking 2008-08-06 19:48:01 (43 views)

You must be registered and logged in to post. Please select an option: