AudiWorld Forums: CORRECT 12mm is the smallest size that is hub centric, I have a set of

Audi urquattro: Celebrating 25 Years in North America

Event Coverage: TT-East 2008

Concept Car: Audi O

C6 A6 Forum || RS 6 Forum || Audi A6 Pricing Info

[Thread] [Post Followup] [Post Picture] [Search Forums] [A6 / S6 (C5 Platform) Discussion]

CORRECT 12mm is the smallest size that is hub centric, I have a set of

Posted by: true2theQ on 2008-05-27 11:21:06
Account #: 119120

In Reply to: IIRC, only spacers above 12mm are hubcentric (and yours are 10mm.) I could be wrong though. posted by audikillsbmw on 2008-05-27 10:44:58

12mm that I bought because they are really hub centric.

2002 S6 Avant, MTM ECU chip upgrade, MTM cat back exhaust, H&R sport springs, Koni yellow shocks
H-sport sways, Brembo Gran Turismo front brake kit, ECS slotted rear rotors, ceramic pads & stainless lines all around
18" MB AMG replica wheels(winter), 18" BBS CH wheels(summer), 19" BBS LM replica wheels(sold)
K&N cone cold air intake, stubby roof antenna.

Thread:

Lug bolts sheared off... - ::zuprong:: 2008-05-27 09:46:59 (163 views)

Well, I'm officially scared off using spacers now (I was considering 5mm non-hub-centrics) - D.D. A6 Avant 2.7Tq 2008-05-27 13:02:56 (47 views)

Spacers = FTL - 4Driver4 2008-05-27 12:13:12 (47 views)

Are the spacers hub-centric like the OEM hub and rim? - thetatau87 2008-05-27 10:37:44 (61 views)

They are - I believe all H&R spacers are hubcentric. - ::zuprong:: 2008-05-27 10:41:14 (43 views)

IIRC, only spacers above 12mm are hubcentric (and yours are 10mm.) I could be wrong though. - audikillsbmw 2008-05-27 10:44:58 (50 views)

CORRECT 12mm is the smallest size that is hub centric, I have a set of - true2theQ 2008-05-27 11:21:06 (63 views)

Actually... - ::zuprong:: 2008-05-27 10:55:31 (68 views)

Here is a 12mm I have that is hub centric - true2theQ 2008-05-27 11:22:43 (106 views)

Same here ;) - ::zuprong:: 2008-05-27 11:29:05 (44 views)

I will take a pic of my 10mm and 12mm side by side... - ::zuprong:: 2008-05-27 11:36:21 (46 views)

What are you torqueing the bolts to? - thetatau87 2008-05-27 10:20:13 (48 views)

85 ft/lb - ::zuprong:: 2008-05-27 10:30:53 (41 views)

Check the other bolts for signs of elongation (distorted threads) They could all be defective. - thetatau87 2008-05-27 10:35:08 (34 views)

At this point, I think I will replace them all regardless of their condition - ::zuprong:: 2008-05-27 10:39:37 (46 views)

did you use longer lugs with the spacers? - Press 2008-05-27 09:57:21 (38 views)

I believe so... - ::zuprong:: 2008-05-27 10:03:41 (60 views)

Pull one of the good ones out and measure it. Let us know how long they are. - audikillsbmw 2008-05-27 10:06:14 (40 views)

41mm - ::zuprong:: 2008-05-27 13:30:09 (35 views)

Those bolts were long enough. They must have failed for some other reason. - audikillsbmw 2008-05-27 13:33:40 (37 views)

I'll follow up with that later in the PM - ::zuprong:: 2008-05-27 10:14:01 (36 views)

2nd that. - audikillsbmw 2008-05-27 10:03:24 (37 views)

You must be registered and logged in to post. Please select an option: