Found the cause of my clunk & vibration!
#1
Found the cause of my clunk & vibration!
<center><img src="http://pictureposter.audiworld.com/92320/cimg0299.jpg"></center><p>This is certainly the cause of the clunk!
I jacked the car up and have about 3mm of lateral movement in the wheel (None vertical) so I'm pretty certain this is the cause of the resonance/vibration that I've been feeling lately.
The question is, is likely to be expensive?
I jacked the car up and have about 3mm of lateral movement in the wheel (None vertical) so I'm pretty certain this is the cause of the resonance/vibration that I've been feeling lately.
The question is, is likely to be expensive?
#3
Re: Tie rod end = 100 bucks and a half hour of work, its easy to do yourself
Thanks - Not as bad as I thought then
I assume it's goo practive to replace both sides!?
Is this what I need? (See link)
Looks almost too cheap!!<ul><li><a href="http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=4567238613&rd= 1&sspagename=STRK%3AMEWA%3AIT&rd=1">http ://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=4567238613&rd= 1&sspagename=STRK%3AMEWA%3AIT&r
I assume it's goo practive to replace both sides!?
Is this what I need? (See link)
Looks almost too cheap!!<ul><li><a href="http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=4567238613&rd= 1&sspagename=STRK%3AMEWA%3AIT&rd=1">http ://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=4567238613&rd= 1&sspagename=STRK%3AMEWA%3AIT&r
#4
That does seem a bit too cheap....
ECS sells an improved version for $55<ul><li><a href="http://www.ecstuning.com/stage/edpd/pagebuild_v2.cgi?make=Audi&engine=2.7T&mod el=C5%20A6&submodel=Quattro&category=Steer ing&subcategory=Tie%20Rod">Click</a></li></ul>
#5
Former Vendor
Join Date: Dec 2000
Location: San Diego, CA
Posts: 15,545
Likes: 0
Received 0 Likes
on
0 Posts
PIckup the S4 ends.
They're considerably more durable than the 2 piece design.<ul><li><a href="http://www.purems.com/products/description.php?II=1096&CA=565&PA=7">S4 Tie Rod Ends</a></li></ul>
#7
Former Vendor
Join Date: Dec 2000
Location: San Diego, CA
Posts: 15,545
Likes: 0
Received 0 Likes
on
0 Posts
No.
The Febi-Bilstein control arm kit includes OE replacements meant for the A4/A6. The S4 tie rod ends are a slight bit different, being 1 piece instead of 2 piece.
The Febi-Bilstein kit does feature tie rod ends that have a larger ball joint that original models, so they are the revised, newer model ends.
The Febi-Bilstein kit does feature tie rod ends that have a larger ball joint that original models, so they are the revised, newer model ends.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
LosGatosS4
S4 / RS4 (B5 Platform) Discussion
23
07-16-2008 03:28 PM
red90q
Audi 90 / 80 / Coupe quattro / Cabriolet
10
03-18-2005 03:12 PM
vrsix
S4 / RS4 (B5 Platform) Discussion
5
11-03-2004 06:50 PM
DINA
Audi 90 / 80 / Coupe quattro / Cabriolet
4
10-29-2003 05:07 AM