Oil Additives Bad for Aluminum Blocks??
#1
AudiWorld Senior Member
Thread Starter
Join Date: Mar 2002
Posts: 1,748
Likes: 0
Received 0 Likes
on
0 Posts
Oil Additives Bad for Aluminum Blocks??
From: carconnection.com
-------------------------------------------------
Oil Additives Bad For Aluminum Blocks?
A team of chemists and mathematicians at the University of Western Ontario deduced that most oil additives are complicated compounds containing zinc and phosphate. They then used computer simulations to find out what happens "at a molecular level when a film of oil containing additives is compressed between two hot, hard surfaces" like engine parts. They concluded that as the pressure rises, the molecules of zinc and phosphate form cross-links with each other, according to a science report in The Washington Post. In engines of steel alloys, this process helps minimize wear. But not so in aluminum engines, where the cross-linked molecular hash becomes harder than the metal and abrades the aluminum surfaces. In other words, if these guys are right, additives are good for engines with steel parts but potentially harmful if used in engines with major aluminum parts, especially on wear surfaces. Experts at the American Petroleum Institute told TheCarConnection they were not familiar with the Ontario study. -Mike Davis<ul><li><a href="http://www.thecarconnection.com/index.asp?article=8302&sid=173&n=156">Orig inal article here</a></li></ul>
-------------------------------------------------
Oil Additives Bad For Aluminum Blocks?
A team of chemists and mathematicians at the University of Western Ontario deduced that most oil additives are complicated compounds containing zinc and phosphate. They then used computer simulations to find out what happens "at a molecular level when a film of oil containing additives is compressed between two hot, hard surfaces" like engine parts. They concluded that as the pressure rises, the molecules of zinc and phosphate form cross-links with each other, according to a science report in The Washington Post. In engines of steel alloys, this process helps minimize wear. But not so in aluminum engines, where the cross-linked molecular hash becomes harder than the metal and abrades the aluminum surfaces. In other words, if these guys are right, additives are good for engines with steel parts but potentially harmful if used in engines with major aluminum parts, especially on wear surfaces. Experts at the American Petroleum Institute told TheCarConnection they were not familiar with the Ontario study. -Mike Davis<ul><li><a href="http://www.thecarconnection.com/index.asp?article=8302&sid=173&n=156">Orig inal article here</a></li></ul>
Thread
Thread Starter
Forum
Replies
Last Post
UbërSpörtWägon
A4 (B6 Platform) Discussion
2
03-24-2005 10:17 AM
John Wilkinson
A4 (B5 Platform) Discussion
17
11-24-1999 10:04 AM
John Wilkinson
A4 (B5 Platform) Discussion
27
11-19-1999 04:54 AM