H7 or H3 for fog lights on 2002 A6
06-13-2002, 12:44 PM
#1
AudiWorld Member
Thread Starter
Join Date: May 2002
Posts: 579
Likes: 0
Received 0 Likes
on
0 Posts
H7 or H3 for fog lights on 2002 A6
I looked at the fog light today and I saw that the bulb was painted on the tip. I didn't want to pull it out yet but I want to replace it. Since the bulb was painted on the tip, is it an H7? Or is it sstill possible that it is an H3. How do you take the bulb out? Thanks
06-13-2002, 03:06 PM
#2
New Member
Join Date: Nov 2001
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Re: Mine has H7 bulbs, ultra brite white now. Removal is very simple...
remove fog light grill per owner's manual. With #2 phillips screwdrive, remove 3 phillips screws. Fog light assembly pulls ouy. Release wiring harness. Release side clamps on fog light housing and seperate. One half has the lens, the other the bulb. It is retained by the bail (wire). Release the bail and you can pull the bulb out by the retaining ring - never touching the glass!
06-14-2002, 08:40 AM
#4
Junior Member
Join Date: Mar 2001
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
'01 and earlier is an H3 bulb. Also, there are only 2 screws to remove the housing,
the third screw is the vertical adjustment (aiming) screw.
- Tom<ul><li><a href="https://forums.audiworld.com/a6/msgs/90940.phtml">Replacing fog lamp bulbs</a></li></ul>
- Tom<ul><li><a href="https://forums.audiworld.com/a6/msgs/90940.phtml">Replacing fog lamp bulbs</a></li></ul>
Thread
Thread Starter
Forum
Replies
Last Post
mm
S4 / RS4 (B5 Platform) Discussion
5
01-18-2002 08:36 AM
