Pitures of the Stoptech brake setup. And SSR wheels.
#1
AudiWorld Senior Member
Thread Starter
Pitures of the Stoptech brake setup. And SSR wheels.
<img src="http://members.aol.com/bandrscen/stoptech1.JPG">
SSR Competitions, 17" x 8.5", 16 lbs per wheel, Yokohama AO32R. 275/40 - 17, these tires are loud!
<img src="http://members.aol.com/bandrscen/stoptech2.JPG">
Still fooling around with the exhaust valance.
SSR Competitions, 17" x 8.5", 16 lbs per wheel, Yokohama AO32R. 275/40 - 17, these tires are loud!
<img src="http://members.aol.com/bandrscen/stoptech2.JPG">
Still fooling around with the exhaust valance.
#5
AudiWorld Senior Member
Thread Starter
$2,200 for kit, (rotors,calipers,brackets,pads,front SS lines). Some other options, but for the
street the Kit is complete. "Ming2.7" should give us some feedback on the time it takes to install at home.
Trending Topics
#8
AudiWorld Senior Member
Thread Starter
Its about an inch higher,(rear) not by choice. Eibach is going to adjust them for me next month
The Eibach Pro Kit on the sport 4.2 did this to mine.
They work fine mechanically. Actually mighty fine.:-). A lot of non sport 4.2 owners have installed and have had no height difference? WTF. Any thoughts?
Has anyone else put the prokit on a sport 4.2?
Feedback would be great. Kit # 1580.140
They work fine mechanically. Actually mighty fine.:-). A lot of non sport 4.2 owners have installed and have had no height difference? WTF. Any thoughts?
Has anyone else put the prokit on a sport 4.2?
Feedback would be great. Kit # 1580.140
#9
Oh, that sucks I guess. No thoughts other than the obvious myself...
...bad install, defective springs, mismatched springs, etc. That's cool that Eibach will fix them for you though.
st
st
#10
Looks great Brian!!. I should be ready in january for some events.
Found out wheels weigh ~29lbs each, so that pretty much has convinced to get a dedicated wheels for track. Thinking OZ superleggera, SSR competitions(used)and some custom wheels by someone out here by me. All in the 16-18lbs range 17". We took so very rough weights for the Miltek exhaust, about 43lbs for the complete system(catback). Will get a more accurate figure and will weigh the stock system too. Again great looking car, give em hell at Willow!!!