Brake Disc help info
02-17-2023, 02:34 PM
#1
AudiWorld Junior Member
Thread Starter
Brake Disc help info
Hi. I wanted some help with my decision about brake disc and pads. I have Audi A6 2010 2.7 140Kw. My rear brake pads are finished and wanted to put new one. Now when i inspected the disc i saw that the thickness is 20mm. According to the manual 20mm is the minimum thickness. My question is, because i need new pads and the disc is already at its minimum thickness, should i buy new discs or is it safe to resurface these?
02-17-2023, 08:57 PM
#2
Hi. I wanted some help with my decision about brake disc and pads. I have Audi A6 2010 2.7 140Kw. My rear brake pads are finished and wanted to put new one. Now when i inspected the disc i saw that the thickness is 20mm. According to the manual 20mm is the minimum thickness. My question is, because i need new pads and the disc is already at its minimum thickness, should i buy new discs or is it safe to resurface these?
The following users liked this post:
Nebitan Lik (02-18-2023)
02-18-2023, 03:48 AM
#3
AudiWorld Junior Member
Thread Starter
@Nebitan Lik you should be installing new pads and rotors. Since once you resurface you'll be under tolerance and you're better off doing the job right once vs wrong twice.
The following users liked this post:
das60 (02-18-2023)
Thread
Thread Starter
Forum
Replies
Last Post
DrGP
S4 (B6 & B7 Platforms) Discussion
0
04-17-2006 08:13 AM
quattrorally
A4 (B5 Platform) Discussion
2
07-11-2005 06:44 PM
Eddie@Tirerack
Wheels & Tires Discussion
0
07-25-2001 06:23 AM
Bing
A4 (B5 Platform) Discussion
1
08-19-2000 01:47 PM