a6 4.2 Fuel Injection Question
#1
a6 4.2 Fuel Injection Question
I'm having a problem with the wiring to injector #7. My noid light is not flashing (other injector connections do) so I need to trace out the wire. I am getting 3.5 - 4v on the positive with the ignition on, so it's the ground signal that's not working. I need to know where to look. Does anyone have a fuel injection wiring diagram? or know the pin on the ECU that sends the signal ground to #7?
#2
AudiWorld Senior Member
There is a complete 2000 or 2001 C5 wiring diagram floating around on here with 3 pages dedicated to engine wiring. I don't have it saved anymore, but if you do a search you'll find the link.
#3
next steps??
I found the wiring diagrams. The Black/Blue is hot when the key is turned. I traced this wire from the fuel injection relay to the injector connector and it's good. The Green/White is the ground signal from the ECU (pin 24). I traced this wire from the ECU plug to the injector connector and again it's good. Now I wonder if I have a bad ECU.
Also, can you swap ECUs or will it fail to start due to the immobilizer?
Also, can you swap ECUs or will it fail to start due to the immobilizer?
Thread
Thread Starter
Forum
Replies
Last Post
UrS4boy
Audi Original "S" Cars
8
01-05-2009 12:53 AM
Angry Alex
Audi 4000 / Coupe GT Discussion
6
12-23-2003 08:26 PM
süpercüp
Audi 90 / 80 / Coupe quattro / Cabriolet
1
02-11-2003 12:57 AM