How to diagnose lights in doors using VAG-COM?
#1
Audiworld Junior Member
Thread Starter
Join Date: Nov 2010
Location: Edgewater, NJ
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
How to diagnose lights in doors using VAG-COM?
Can someone help me by providing the steps to diagnose the lights inside the doors using VAG-COM?
For example, the red light (facing outward) on my passenger rear door won't light up. I've changed the bulb, connection is not corroded and no change.
Door does show up in the cluster, dome light works, the light pointing at ground works, just the red one in the door does not.
Thanks!
For example, the red light (facing outward) on my passenger rear door won't light up. I've changed the bulb, connection is not corroded and no change.
Door does show up in the cluster, dome light works, the light pointing at ground works, just the red one in the door does not.
Thanks!
#2
Measuring blocks. But I doubt you'll find anything for that light. You can, however, verify that the switch and other functions are working.
Play around in Measuring blocks and see what you can find.
Play around in Measuring blocks and see what you can find.
Thread
Thread Starter
Forum
Replies
Last Post
hellonwheels33
A8 / S8 (D3 Platform) Discussion
32
04-16-2023 07:32 AM
carl viking
A8 / S8 (D3 Platform) Discussion
36
04-27-2020 01:17 PM
elem
A6 / S6 (C5 Platform) Discussion
0
09-07-2015 01:04 PM