ACC, Adaptive cruise, start-stop, adaptive light FAULT!
07-29-2023, 01:23 AM
#1
AudiWorld Junior Member
Thread Starter
Join Date: Aug 2021
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
ACC, Adaptive cruise, start-stop, adaptive light FAULT!
Hello,
I have a Audi A6 2012 with some errors, there is some messages showing in the car. I have read only headlight unit and adaptive cruise control unit with VCDS and I will attach the fault codes also.
Fault messages in the car:
- Distance warning is showing red
- ACC and Audi braking guard: not available
- Start-stop system: system fault! Function unavailable
- Audi adaptive light: system fault!
Also Lane Assist is not working but I guess it have with ACC and distance warning to do.
HEADLIGHT FAULT CODE:
ADAPTIVE CRUISE CONTROL FAULT CODE:
I have a Audi A6 2012 with some errors, there is some messages showing in the car. I have read only headlight unit and adaptive cruise control unit with VCDS and I will attach the fault codes also.
Fault messages in the car:
- Distance warning is showing red
- ACC and Audi braking guard: not available
- Start-stop system: system fault! Function unavailable
- Audi adaptive light: system fault!
Also Lane Assist is not working but I guess it have with ACC and distance warning to do.
HEADLIGHT FAULT CODE:
572171 - Stationary Cornering Lamp Left
C1083 13 [008] - Open Circuit
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 34
Reset counter: 254
Mileage: 188834 km
Date: 2023.06.20
Time: 12:52:09
C1083 13 [008] - Open Circuit
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 34
Reset counter: 254
Mileage: 188834 km
Date: 2023.06.20
Time: 12:52:09
8448 - Internal Fault
B200F F0 [025] - Unknown Error Elaboration
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Not Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 1
Fault Frequency: 1
Mileage: 185264 km
Date: 2023.03.23
Time: 09:28:16
Control Module temperature: 21 ∞C
Voltage terminal 15: 14.852 V
Velocity_vehicle_reference: 4.88 m/s
Longitudinal_acceleration_vehicle_reference: -0.25 m/s≤
94720 - Function Restriction due to Faults in Other Modules
U1113 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 214
Mileage: 188834 km
Date: 2023.06.20
Time: 12:52:36
Control Module temperature: 36 ∞C
Voltage terminal 15: 11.499 V
Velocity_vehicle_reference: -0.00 m/s
Longitudinal_acceleration_vehicle_reference: 0.00 m/s≤
94976 - Function Restriction due to Faults in Other Modules
U1113 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 214
Mileage: 188834 km
Date: 2023.06.20
Time: 12:52:36
Control Module temperature: 36 ∞C
Voltage terminal 15: 11.499 V
Velocity_vehicle_reference: -0.00 m/s
Longitudinal_acceleration_vehicle_reference: 0.00 m/s≤
95232 - Function Restriction due to Faults in Other Modules
U1113 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 214
Mileage: 188834 km
Date: 2023.06.20
Time: 12:52:36
Control Module temperature: 36 ∞C
Voltage terminal 15: 11.499 V
Velocity_vehicle_reference: -0.00 m/s
Longitudinal_acceleration_vehicle_reference: 0.00 m/s≤
95488 - Function Restriction due to Faults in Other Modules
U1113 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 214
Mileage: 188834 km
Date: 2023.06.20
Time: 12:52:36
Control Module temperature: 36 ∞C
Voltage terminal 15: 11.499 V
Velocity_vehicle_reference: -0.00 m/s
Longitudinal_acceleration_vehicle_reference: 0.00 m/s≤
77312 - Function Restricted due to Missing Message(s)
U1111 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 214
Mileage: 188834 km
Date: 2023.06.20
Time: 12:52:36
Control Module temperature: 36 ∞C
Voltage terminal 15: 11.493 V
Velocity_vehicle_reference: -0.00 m/s
Longitudinal_acceleration_vehicle_reference: 0.00 m/s≤
77568 - Function Restricted due to Missing Message(s)
U1111 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 214
Mileage: 188834 km
Date: 2023.06.20
Time: 12:52:37
Control Module temperature: 36 ∞C
Voltage terminal 15: 11.488 V
Velocity_vehicle_reference: -0.00 m/s
Longitudinal_acceleration_vehicle_reference: 0.00 m/s≤
82688 - Function Restriction due to Faults in Other Modules
U1113 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 71
Reset counter: 214
Mileage: 188834 km
Date: 2023.06.20
Time: 12:52:36
Control Module temperature: 36 ∞C
Voltage terminal 15: 11.499 V
Velocity_vehicle_reference: -0.00 m/s
Longitudinal_acceleration_vehicle_reference: 0.00 m/s≤
B200F F0 [025] - Unknown Error Elaboration
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Not Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 1
Fault Frequency: 1
Mileage: 185264 km
Date: 2023.03.23
Time: 09:28:16
Control Module temperature: 21 ∞C
Voltage terminal 15: 14.852 V
Velocity_vehicle_reference: 4.88 m/s
Longitudinal_acceleration_vehicle_reference: -0.25 m/s≤
94720 - Function Restriction due to Faults in Other Modules
U1113 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 214
Mileage: 188834 km
Date: 2023.06.20
Time: 12:52:36
Control Module temperature: 36 ∞C
Voltage terminal 15: 11.499 V
Velocity_vehicle_reference: -0.00 m/s
Longitudinal_acceleration_vehicle_reference: 0.00 m/s≤
94976 - Function Restriction due to Faults in Other Modules
U1113 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 214
Mileage: 188834 km
Date: 2023.06.20
Time: 12:52:36
Control Module temperature: 36 ∞C
Voltage terminal 15: 11.499 V
Velocity_vehicle_reference: -0.00 m/s
Longitudinal_acceleration_vehicle_reference: 0.00 m/s≤
95232 - Function Restriction due to Faults in Other Modules
U1113 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 214
Mileage: 188834 km
Date: 2023.06.20
Time: 12:52:36
Control Module temperature: 36 ∞C
Voltage terminal 15: 11.499 V
Velocity_vehicle_reference: -0.00 m/s
Longitudinal_acceleration_vehicle_reference: 0.00 m/s≤
95488 - Function Restriction due to Faults in Other Modules
U1113 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 214
Mileage: 188834 km
Date: 2023.06.20
Time: 12:52:36
Control Module temperature: 36 ∞C
Voltage terminal 15: 11.499 V
Velocity_vehicle_reference: -0.00 m/s
Longitudinal_acceleration_vehicle_reference: 0.00 m/s≤
77312 - Function Restricted due to Missing Message(s)
U1111 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 214
Mileage: 188834 km
Date: 2023.06.20
Time: 12:52:36
Control Module temperature: 36 ∞C
Voltage terminal 15: 11.493 V
Velocity_vehicle_reference: -0.00 m/s
Longitudinal_acceleration_vehicle_reference: 0.00 m/s≤
77568 - Function Restricted due to Missing Message(s)
U1111 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 214
Mileage: 188834 km
Date: 2023.06.20
Time: 12:52:37
Control Module temperature: 36 ∞C
Voltage terminal 15: 11.488 V
Velocity_vehicle_reference: -0.00 m/s
Longitudinal_acceleration_vehicle_reference: 0.00 m/s≤
82688 - Function Restriction due to Faults in Other Modules
U1113 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 71
Reset counter: 214
Mileage: 188834 km
Date: 2023.06.20
Time: 12:52:36
Control Module temperature: 36 ∞C
Voltage terminal 15: 11.499 V
Velocity_vehicle_reference: -0.00 m/s
Longitudinal_acceleration_vehicle_reference: 0.00 m/s≤
07-29-2023, 01:41 AM
#2
AudiWorld Senior Member
How old/what is the condition go of the battery? Multiple random error messages is often an indication of a battery starting to fail. On the VCDS print out you attached all the voltages are less than 11.5v. I am no expert but I would have expected them to be over 12v
07-29-2023, 01:48 AM
#3
AudiWorld Junior Member
Thread Starter
Join Date: Aug 2021
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
I'm also no expert but yes I heard also it should be over 12V but even when I erase fault codes they funcitons still not working. Start-stop maybe is cause of battery but other fault should not be cause battery.
About the Audi Adaptive Light, I just maked some research and I think I must change just the light for curving.
About the Audi Adaptive Light, I just maked some research and I think I must change just the light for curving.
07-29-2023, 02:17 AM
#4
AudiWorld Junior Member
Thread Starter
Join Date: Aug 2021
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
I did also enter 09 Cent. Elect. module and got this fault code:
01319 - Control Module for Distance Control (J428)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 6
Fault Frequency: 1
Reset counter: 199
Mileage: 188834 km
Time Indication: 0
Date: 2023.06.20
Time: 12:51:00
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 6
Fault Frequency: 1
Reset counter: 199
Mileage: 188834 km
Time Indication: 0
Date: 2023.06.20
Time: 12:51:00
07-29-2023, 03:14 AM
#5
AudiWorld Senior Member
I'm also no expert but yes I heard also it should be over 12V but even when I erase fault codes they funcitons still not working. Start-stop maybe is cause of battery but other fault should not be cause battery.
About the Audi Adaptive Light, I just maked some research and I think I must change just the light for curving.
About the Audi Adaptive Light, I just maked some research and I think I must change just the light for curving.
07-29-2023, 05:47 AM
#7
AudiWorld Junior Member
Thread Starter
Join Date: Aug 2021
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
07-30-2023, 01:43 AM
#8
AudiWorld Junior Member
Thread Starter
Join Date: Aug 2021
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
07-30-2023, 02:50 AM
#9
AudiWorld Senior Member
Looks low. The battery is only 36% charged and the voltage should be slightly over 12.5v for a battery in prime condition. Depending not he age of the battery I would either put it on a charger for at least 12 hours (if less than 3 years old) or replace (if over 3 years old)
