snagitseven

Clearing a code cannot clear a problem that caused the fault. It's just a report log of the faults.
The reported fault seems to indicate the sensors need realignment which only an Audi dealer can resolve. They use special aiming jigs in conjunction with software.

Collak

I guess Its needed to audi dealer if its a fault at 'Image processing' module, which I have solved it and no longer showing any other fault...
I'll lift it up to standard/default and wait for some days, I guess its gonna start working after awhile- Its just no reason to have losen any data

13c7a6

What year is your car? I had the same issue with my 2013. Both time, the dealer found corrosion between the sensor connector and the wiring harness. They replaced both under warranty TWICE within a 12 month period and aligned the new sensors. my car had 53K miles. Good Luck.

Collak

It's 2011.
I know I did something wrong with lowering it down...
I lowered left side more than the right one, which after awhile it probably went something wrong between them...
I'll go to a friend of mine tomorrow and it's probably gonna be solved easily by his vag, probably only alignment is needed and it should be allgood.
As I did fix height now.

Collak

THIS IS SOLVED.
No I didnt replace or anything, got it fixed it Vag.