replacing stock bulbs and fog lights on 2002 1.8T
06-02-2004, 12:39 PM
#1
New Member
Thread Starter
Join Date: May 2004
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
replacing stock bulbs and fog lights on 2002 1.8T
whats involved in replacing the lights, taking the intake pipe off it looks like, unscrewing the housing mabey??
What about the fog lights, i didn't look to close on the work needed to get at them.
Hints help, tools???
What about the fog lights, i didn't look to close on the work needed to get at them.
Hints help, tools???
06-02-2004, 12:56 PM
#3
AudiWorld Super User
Join Date: May 2003
Posts: 4,867
Likes: 0
Received 0 Likes
on
0 Posts
heres how to remove the headlights.
these are DIY instructions for clear corner but you can just use the first few steps that show you haw to remove the head light housing.<ul><li><a href="https://www.audiworld.com/tech/ext40.shtml">https://www.audiworld.com/tech/ext40.shtml</a</li></ul>
06-02-2004, 02:01 PM
#5
Senior Member
Join Date: Feb 2003
Posts: 6,957
Likes: 0
Received 0 Likes
on
0 Posts
I just reached underneath, from behind the foglight, to remove the bulbs....
Passenger side is easy to get at. Driver side is a little harder and you need to remove grill so you can push the hard rubber piece back and then grab the bulb socket, twist and turn, being careful when pulling it out and replacing with the new one.
06-02-2004, 05:04 PM
#6
That's a good right up, but on the passenger side, the intake really does not need to be removed....
Atleast on the 3.0ers, the Intake is a PITA to get back in perfectly ...
Soon I discovered the removal of the intake was really not necessary. Just an extension on the ratchet is all that is needed
Soon I discovered the removal of the intake was really not necessary. Just an extension on the ratchet is all that is needed
06-02-2004, 05:09 PM
#7
Fogs is a very simple removal process...
There are 4 tabs holding in the fog grill. Take a small flat head screwdriver and softly creep the tabs to release the grill.
Now take a Philips Screwdriver and remove the 2 screws that hold the fog assembly in place.
Just the reverse process to reinstall.
Done
Now take a Philips Screwdriver and remove the 2 screws that hold the fog assembly in place.
Just the reverse process to reinstall.
Done
Trending Topics
06-02-2004, 05:50 PM
#8
Senior Member
Join Date: Feb 2003
Posts: 6,957
Likes: 0
Received 0 Likes
on
0 Posts
My method was even simpler.....
Reach underneath from behind, turn, and pull out on passenger side. Driver side is a little harder with that plastic piece behind the foglight housing, so I removed the grill and used one hand to hold it back, then used the other hand to carefully pull out the bulb socket.
Thread
Thread Starter
Forum
Replies
Last Post
Audi A4 2002 S4 6spd 98k
rsixxer23
Vehicles For Sale - Archive (NO NEW POSTS HERE)
4
01-06-2016 03:25 AM
ECS Tuning-Audi
A4 (B6 Platform) Discussion
0
09-02-2015 11:39 AM
Powerofbabel
Parts For Sale - Archive (NO NEW POSTS HERE)
0
09-02-2015 10:08 AM