Eddie Man

<center><img src="http://pictureposter.audiworld.com/10568/glovebox.jpg"></center><p>
"Cool" mod for under $35. Two old pieces, go bye-bye...
A shout out to "NeedforSleep"s link...<ul><li><a href="https://forums.audiworld.com/a4gen2/msgs/534991.phtml">Glove Box Cooler Link</a></li></ul>

ILMA_Revo_Stage_2+

going to attempt it next wknd.

caster

REPOST + you need a new glove box liner for condensation!

XTHCX

Did you ever get those pedals from autovation?

NS2000X

How can it be a repost. Eddie Man, is just commenting that he has performed the mod

Eddie Man

engineer in me tell me that if a condition of condensation does occur, and this may be on a very humid day and me running the cooler box valve wide-open. I would merely either discontinue use or turn-down the valve. If condensation becomes a "big" problem and it really shouldn't happen, just merely open the door and air it out !

This is a $35 mod that could easily escalate to something that is really of no use to me.

Just a fun mod and take it for what its worth. Problems of condesation? Just do the above.

There becomes a point of "diminishing returns".

caster

agree. but why worry about condensation. condensation makes mold.

Eddie Man

used to the brushed aluminum look down below, where it was pitch black before. I would recommend this mod. However, that middle bolt nut on the brake pedal is a Biatch to get in. Two out of the three actually hold it very secure.

Eddie Man

for an extended period of time. This should never occur unless you completely neglect the issue.

caster

aight just so you understand my point "crystal clear" . you really need a different linear