AudiWorld Forums: A4 (B5 Platform) Discussion

World Debut: Audi A1 Sportback concept

New Site Feature: AudiWorld Video Gallery

Now Supercharged: 2010 Audi S4 Sedan & Avant

B5 A4 FAQ || B6 A4 Forum || B7 A4 Forum || Audi A4 Pricing Info

[Reader Tips] [Search Forums] [Post Picture] [Post New Thread]

Page: [<<<] [1] ... [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [>>>]
Total Threads: 328334, Total Pages: 6567

Question about relays - Ertman 2008-09-25 08:12:36 (43 views) Answer about relays - Nate (Baba Ghanoush) 2008-09-25 08:38:39 (28 views) according etka at parts counter... - Ertman 2008-09-25 09:14:04 (20 views) That's incorrect. There is no 7M0 relay for our A4's. The A6 uses it, but not the A4. - Nate (Baba Ghanoush) 2008-09-25 09:30:59 (14 views) facking parts chimp - Ertman 2008-09-25 10:50:06 (8 views)
30V front 02 Sensor...how the Hell? - TheMike 2008-09-25 08:01:24 (59 views) I did them from underneath the car on mine. Link inside has the procedure i used. - Millatime 2008-09-25 10:18:27 (33 views) I made sure the car was really cool before I'd put my hands down there! - cparke 2008-09-25 10:26:33 (19 views) I didnt get it real hot, just ran the car for a minute to heat the pipe up a bit. - Millatime 2008-09-25 10:35:38 (18 views) Drop engine. - MrGoodbytes 2008-09-25 09:11:24 (22 views) Great Idea! - TheMike 2008-09-25 11:21:22 (20 views) =) - MrGoodbytes 2008-09-25 20:08:47 (13 views) Use a hammer and a long bar to shock it. - 4Driver4 2008-09-25 09:02:47 (20 views) You need a wobbly extension to get it out from under the hood. - cparke 2008-09-25 08:30:21 (35 views) you can do them from the top/hood on 30V? I haven't really started looknig into - velosouljah 2008-09-25 09:12:28 (27 views) I did it this way, but I haven't added it to the FAQ yet. - cparke 2008-09-25 09:31:02 (34 views) Thanks for the info. Did you snap any pics while you were doing it that you can share? - velosouljah 2008-09-25 10:04:59 (18 views) No, sorry. But there isn't much to photograph. Also, it's tight down there. - cparke 2008-09-25 10:25:09 (20 views) I've heard that going from beneath with a really long extension works - Shard7:All Better 2008-09-25 08:21:18 (27 views) mapp gas torch? I plan on using that when I do my front 2 before winter hits... - velosouljah 2008-09-25 08:08:30 (28 views) a comment... - 77'911 2008-09-25 11:02:08 (56 views) tool... - 77'911 2008-09-25 11:06:22 (48 views) crow's foot type tool... - 77'911 2008-09-25 11:11:56 (49 views) YEAh, I tried one of these, but the square part for the extension doesnt stick out... - TheMike 2008-09-25 11:24:52 (23 views) They do make them with a larger offset that will clear the pipe from underneath - Millatime 2008-09-25 12:25:15 (31 views) a comment.... - 77'911 2008-09-25 11:45:53 (25 views) I agree with this process. I've been able to get to BOTH of my - über güber 2008-09-25 11:58:30 (24 views) a response..... - 77'911 2008-09-25 13:10:10 (17 views) Prior to removing, I ran the car so the cat was hot. I think it helped a lot - über güber 2008-09-25 13:30:47 (19 views)
Success! - scored a full set if 225/40/18 Yokohama W Drive - Snow tires for $300 for the B6 Avus - RallyVermont 2008-09-25 06:13:01 (181 views) sweet now sell them to me for 100$ =) .... not that i have 18 inch rims... but damn great deal! - Im@wesome 2008-09-25 13:19:48 (11 views) Now all ya need is some 18" Ronal Bears to go with them. Ballar. - Audi Junkie 2008-09-25 08:37:14 (12 views) they look like my hankook icebear 300 - ScratchRob13 2008-09-25 07:49:38 (26 views) nice, but they look as if they'd go bald on the insides fast. - Silver Streakin' 2008-09-25 06:32:46 (19 views) Why's that? - Pat 2008-09-25 07:30:55 (18 views) there's no block tread. it's rolled like a performance tire. that tire actually looks like an A/S - Silver Streakin' 2008-09-25 09:29:14 (27 views) or, wait... is the big block side the inside? - Silver Streakin' 2008-09-25 09:43:28 (15 views) nooob! =) - RallyVermont 2008-09-25 12:17:56 (15 views) I hope it doesn't snow - Silver Streakin' 2008-09-25 13:21:19 (17 views) lol srsly I want it to DUMP this year.. more so want the lake to freeze over for some ice racing :) - RallyVermont 2008-09-25 19:31:31 (11 views) yess i have only heard rumors from tom about it... every year it didnt happen - ScratchRob13 2008-09-25 19:39:25 (13 views) dude, I'll just pray =) - RallyVermont 2008-09-25 19:42:54 (12 views) lol... whats left to get her running again? - ScratchRob13 2008-09-25 19:53:49 (13 views) Serp Belt - power sterring pump/belt - coolant lines - oil/flter - IC piping - front end = done - RallyVermont 2008-09-26 04:16:15 (12 views) lol yes - Pat 2008-09-25 09:46:03 (11 views) I'm so jealous. I'm about to place an order for 17inch snows, for my trips up to VT - SFexBOY 2008-09-25 06:20:25 (46 views) That they aren't! What area of VT? - RallyVermont 2008-09-25 06:23:43 (24 views) Usually in the Mt Snow/Stratton area - SFexBOY 2008-09-25 14:25:15 (12 views) lame... head north! - ScratchRob13 2008-09-25 14:43:15 (9 views)
VAGCOM can't help this one... - A4Besessenheit 2008-09-25 00:25:34 (75 views) How much?? - Ertman 2008-09-25 07:53:51 (29 views) Re: How much?? - A4Besessenheit 2008-09-25 20:36:40 (18 views) yes i do...YGM - Ertman 2008-09-29 06:53:25 (6 views) Actually the HEX-USB can help you. You can whip her with it and ask her.... - shawfm 2008-09-25 03:56:02 (50 views)
anybody ever replace a driveshaft? how did you keep it straight when you put it - ski ya later 2008-09-24 22:46:14 (46 views) are u having vibration issue with the drive shaft...did you balance it? - gezuz82 2008-09-25 07:27:45 (32 views) fiberglass driveshaft? really? - myers99A4Q 2008-09-25 07:34:54 (15 views) some older cars (96 and 97) had a carbon fiber driveshaft - pac1085 2008-09-25 08:19:17 (28 views) mine came balanced. vibration issues - don't know, I have yet to install the new - ski ya later 2008-09-25 07:32:45 (23 views)
For those who have installed there water/meth injections setups... - ScratchRob13 2008-09-24 22:00:19 (64 views) Why closest to IC end tank - what would be the advantage to that? - A400 2008-09-25 09:01:37 (15 views) greater cooling... closer to the TB is greater octane boost? thats what i have been reading - ScratchRob13 2008-09-25 09:04:07 (19 views) That's how I've been running it from the get go. Discharge of FMIC = better..... - bassed 2008-09-25 10:45:44 (24 views) My thinking is that farther from engine gives droplets more time/area to get bigger - A400 2008-09-25 13:43:46 (20 views) I am running a dual nozzle setup, not single. This method is the.. - bassed 2008-09-25 16:33:37 (18 views) That id why the pump tune = no WI, trak tune, just to cool, drag tune for power - A400 2008-09-26 06:25:58 (8 views) I've got mine 6in from the TB.. - AutoXJunkie (Justin) 2008-09-25 03:56:52 (18 views) Ian (bassed) whats coming off the hot side IC piping? - ScratchRob13 2008-09-24 22:09:29 (85 views) pfft to match his pink popped colla' - ScratchRob13 2008-09-25 19:54:27 (12 views) yup.. meant to put that under Joel's post... n00b here - ScratchRob13 2008-09-25 19:55:02 (9 views) you have got to be kidding me.. are those pink zip ties? lol!! - RallyVermont 2008-09-25 19:41:19 (13 views) I like pink, soooooooooooo what. My favorite things are pink, have lips and on occasion squirt..... - bassed 2008-09-25 20:01:38 (15 views) well played.. well played. - RallyVermont 2008-09-26 05:22:22 (9 views) That's just a boost line:)....... - bassed 2008-09-25 08:52:46 (40 views) so both injectors fire on the same feed line? how is the second solenoid controlled, by snow? - ScratchRob13 2008-09-25 10:15:53 (16 views) I feed from tank, to solenoid and then to each nozzle. Solenoid is only for anti siphoning at.... - bassed 2008-09-25 10:47:39 (18 views) So both injectors are firing at the same time then... - ScratchRob13 2008-09-25 12:17:01 (17 views) Yes they are both firing at the same time, all the kits do it this way if running dual nozzles.... - bassed 2008-09-25 13:29:14 (16 views) i like that... now I need to get another injector - ScratchRob13 2008-09-25 19:38:46 (11 views)
help. where are all the vaccum lines on my 1.8t - audi1.8t4life 2008-09-24 21:54:32 (47 views) since the B5 platform is over 10years old, vac line issues hae been covered in great detail. - ModifiedA4 2008-09-25 05:52:35 (32 views) If it's in your engine bay and it's rubber, there's a >80% chance it's a vacuum line - Mirror\|rorriM 2008-09-25 04:18:41 (18 views) All over the place. Actually, what might be helpful is a list of all DIAMETERS of vac line - pentosinjunky 2008-09-25 01:13:39 (39 views) why does the diameter matter??? - audi1.8t4life 2008-09-25 20:48:02 (14 views) I have used - Monkeyboy 2008-09-25 04:58:00 (41 views) Helpful, thanks, BMed - pentosinjunky 2008-09-25 05:20:23 (17 views)
i lol'ed at this response - Im@wesome 2008-09-24 21:36:53 (133 views) guess I am confused as I thought all of AW in general - velosouljah 2008-09-25 05:56:31 (34 views) i laffed. - ModifiedA4 2008-09-25 05:32:04 (20 views) Jesus lives in the B5A4 forum... all there is to know - ScratchRob13 2008-09-24 21:53:03 (31 views) ^ The BC! - qfrog Ti20 2008-09-25 06:32:07 (27 views) know what ? - freakness 2008-09-24 22:02:58 (51 views) I chuckled and belched at the same time... - freakness 2008-09-24 21:48:32 (50 views)
Anybody ever installed a 25.4mm brake master cylinder (4D0-612-021-A) in place of a 23.81mm? - qfrog Ti20 2008-09-24 18:30:40 (48 views) a comment.... - 77'911 2008-09-24 20:59:56 (76 views) I've got access to the tool - qfrog Ti20 2008-09-25 15:20:43 (16 views)
squishy brakes after MC meltdown - manualAvant 2008-09-24 16:44:46 (62 views) Replace known defective/damaged parts first, replace fluid... bleed last. - freakness 2008-09-24 18:26:15 (29 views) I agree.... I'd start with the bleeding. - qfrog Ti20 2008-09-24 18:16:36 (17 views) Been bled when the mc went in - manualAvant 2008-09-24 20:20:39 (20 views) Did you press the brake pedal with your foot while the Motive system was connected.. - freakness 2008-09-24 20:23:14 (24 views) No. Lines were bled at shop. I haven't done anything yet - manualAvant 2008-09-25 06:40:14 (11 views) When you use your Motive Power Bleeder(tm) don't touch the brake pedal.. - freakness 2008-09-25 08:59:53 (16 views) Right. Point of the Motive is to use the pressure to substitute for a 2nd person on pedal - manualAvant 2008-09-25 15:40:28 (10 views) go try to bleeding them start back right-back left-front right-front left - ScratchRob13 2008-09-24 16:58:03 (17 views)
dropped off the car for repair today.... sad to leave her somewhere - naudi1.8 2008-09-24 14:06:30 (234 views) I'd rather it go under the knife and be perfect. They blend quarter panels like your wouldn't - Kingtr boost fixed! 2008-09-24 14:24:21 (66 views) I've already told the guy that I don't want to even know it ever happened - velosouljah 2008-09-24 14:31:04 (50 views) Ha, that sounds like a great plan. Some work is really easy to spot, front of my car, and rear of - Kingtr boost fixed! 2008-09-24 18:40:02 (29 views) ditto. My wife drops off her B5 tomorrow and I've heard nothing but raves about the place - velosouljah 2008-09-24 14:14:39 (44 views)
Do 17" Flik's ( I am guessing, Justice) on our cars, fit over BBK's? - RallyVermont 2008-09-24 13:45:52 (65 views) I currently run justices on the track and they fit over my boxsters w/ plenty of room. - Alpha7 2008-09-25 06:12:35 (13 views) flik ftd does... ask QFrog - ScratchRob13 2008-09-24 16:13:33 (121 views) I run 17x8 ET45 not ET35 - qfrog Ti20 2008-09-24 17:16:03 (29 views) mine are 35 and brembo boxster... they should clear but don't... - ScratchRob13 2008-09-24 17:28:29 (31 views) I think you are right, I was just as shocked then as I am now. - qfrog Ti20 2008-09-24 18:14:56 (26 views) my only guess is that the caliper carrier I have is odd, and the rotors are as well... - ScratchRob13 2008-09-24 18:24:43 (46 views) See that still doesn't make sense. - qfrog Ti20 2008-09-24 18:46:20 (28 views) Can you do me a small favor... - qfrog Ti20 2008-09-24 18:51:44 (30 views) yea i can do that... the weekend after next i'll be home... no vernier caliper up at school - ScratchRob13 2008-09-24 19:03:00 (19 views) OK Thanks. - qfrog Ti20 2008-09-24 19:17:33 (17 views) Yep! - Digit@lex 2008-09-24 13:53:27 (133 views) thanks for the reply.. I actually just scored some 18" Pirelli Snow tires locally for a great deal - RallyVermont 2008-09-24 17:33:01 (27 views) oops assumed you mean Lex's LOL - Digit@lex 2008-09-24 13:59:33 (22 views) the flik lex's do over 332 ST, I think the justice do, check with edge racing - Jon-1.8t 2008-09-24 13:50:35 (22 views)
Noob - Need your help identifying this part - stealthmeister 2008-09-24 12:35:25 (213 views) looks like a spring to hold the duct the your climate control vent on - wont cause any issues. - audinutt 2008-09-24 20:20:09 (24 views) i found that before too - i just threw it out the window - thewatcher101 2008-09-24 19:13:47 (29 views) Found mine loose in the fuse box area. - Haulin A..4 2008-09-24 17:21:35 (21 views) That's the spring to one of the levels for the seat adjustment, I'm pretty sure. - Josh5442 2008-09-24 15:59:04 (23 views) it's a mystery dash spring. - ChooChooNongNongHead 2008-09-24 16:03:35 (42 views) my guess It's under your seat... - mktbully 2008-09-24 14:35:13 (34 views) Maybe something under the seat - myers99A4Q 2008-09-24 13:52:25 (26 views) the mystery spring. Like ChooChooNongNongHead said, don't worry - Solaris 2008-09-24 13:37:29 (54 views) That is what you use to fix the inside door handle when it eventually breaks. It deploys - velosouljah 2008-09-24 13:41:16 (47 views) it's some nothing spring to hold something up under the dash... don't worry about it. - ChooChooNongNongHead 2008-09-24 13:09:45 (31 views) Did your pedal feel change at all after this fell out? - Digit@lex 2008-09-24 12:37:31 (35 views) Re: Did your pedal feel change at all after this fell out? - stealthmeister 2008-09-24 12:49:10 (66 views)
Where can I get a tiptronic trans - scud 2008-09-24 12:28:58 (62 views) where are you located? - Chicktronic 2008-09-24 15:49:30 (21 views) car-part.com - Silver Streakin' 2008-09-24 13:19:26 (28 views) search force 5 auto and give them a call - Casablanca Avant 2008-09-24 12:36:35 (39 views) amen! Chris shipped me one that solved my problem. Tip: have the tranny delivered to - DaveInSaltLake 2008-09-24 14:50:13 (42 views) Bingo. - RallyVermont 2008-09-24 13:46:27 (19 views) 2nd - qazimo 2008-09-24 13:29:31 (18 views)
help me with my rack (yes, again) - Mr Paul [T-28] 2008-09-24 12:04:34 (59 views) Found these on the Tex, good deal or not? - Mr Paul [T-28] 2008-09-25 08:04:38 (30 views) Or this - Mr Paul [T-28] 2008-09-24 12:14:45 (40 views) i'd go with this... the 50" bars are good and long for our cars.... - JAFO 2008-09-24 14:40:55 (18 views) that looks like the one I have... just make sure the bar length is correct, and the get the fit kit - ScratchRob13 2008-09-24 13:20:03 (14 views) Yep, length is correct. I think I'll bid on this and try to find a fit kit. - Mr Paul [T-28] 2008-09-24 13:38:57 (16 views)
00 ATW is running a K03 or a K03s? - mktbully 2008-09-24 11:18:23 (76 views) Having owned both model years. - M.S.G. 2008-09-24 21:04:09 (28 views) When I pulled mine it was the same PN as the AWM motor. You can then decide... - shawfm 2008-09-24 14:00:52 (38 views) :) - ModifiedA4 2008-09-25 05:00:38 (12 views) it is not a K03s. It is larger than a K03 from an AEB but smaller than one from an AWM - DVS27T 2008-09-24 12:50:50 (40 views) i repeat again, i dont think ANY B5 was EVER shipped with a K03s. - ModifiedA4 2008-09-24 11:58:44 (79 views) your poor cat - Silver Streakin' 2008-09-24 12:24:13 (100 views) LOL! - ModifiedA4 2008-09-24 12:56:02 (18 views) lol'ed ---> - Im@wesome 2008-09-24 12:39:02 (16 views) what do you mean? i had a k03s on my 2001.5 awm. dung beetle then - Im@wesome 2008-09-24 12:00:29 (61 views) found it.. sorry it was only the 2 blade sizes. But you can find the specs on a k03 - Im@wesome 2008-09-24 12:06:38 (56 views) i missed that thread, but...i dont see pics of a K03. - ModifiedA4 2008-09-24 12:13:39 (45 views) My old K03S is on an '00 ATW that came with the plain jane K03. - Silver Streakin' 2008-09-24 11:37:17 (26 views) was there really a difference or i won't feel it from the butt dyno? - mktbully 2008-09-24 11:50:36 (25 views) I didn't drive it. ask EDness. turbo wasn't healthy, hence the removal, but he said it spooled - Silver Streakin' 2008-09-24 12:18:54 (35 views) K03 - K03S not really any point unless you find one cheap, same thing with K04 - pentosinjunky 2008-09-24 11:20:40 (43 views) ok i guess it's time to look for a K03..thanks - mktbully 2008-09-24 11:32:58 (22 views) yes, bolts right up - a4nik8er 2008-09-24 11:19:54 (22 views) it runs a k03.. you can put in a k03 s.. or k04 (need different programming) - Im@wesome 2008-09-24 11:19:40 (27 views)
ABS/Brake Light Reset....Help (local) - ouikikazz 2008-09-24 10:44:40 (51 views) Post on your local forum and find someone with VAG-COM. - 4Driver4 2008-09-24 15:30:14 (16 views) unplug your battery, let sit for a few minutes and reconnect. Make sure - Casablanca Avant 2008-09-24 10:48:15 (42 views) Re: unplug your battery, let sit for a few minutes and reconnect. Make sure - ouikikazz 2008-09-24 13:02:31 (23 views) should be on a card in your owners manual packet - Casablanca Avant 2008-09-24 13:21:04 (17 views) Re: should be on a card in your owners manual packet - ouikikazz 2008-09-24 14:11:10 (20 views) Don't d this! You may need to reset the throttle body to start the car - a4avant99 2008-09-24 12:04:11 (37 views)
140k on AEB original turbo, with rebuilt head. The exhaust smokes all the time, more so after - B56 2008-09-24 08:54:18 (53 views) if it smokes alot after first time startup.. probably rings. But yours seems - über güber 2008-09-24 09:34:09 (41 views) if it smokes alot after first time startup.. probably rings.?? hmmm IMHO - qazimo 2008-09-24 10:03:48 (46 views) yup or in our other car's case, head gasket with the high pressure oil port bleeding into 1 cylinder - Audiboy 2008-09-24 14:37:34 (15 views) Excellent point. I think I have it backwards. - über güber 2008-09-24 10:39:39 (28 views)
Speaking of seat belts: Has anyone tried to retrofit a rear center shoulder belt from an Avant.... - TEB 2008-09-24 08:39:24 (35 views) yep they do along with a extra head rest that I've taken out as it decreases visibility - velosouljah 2008-09-24 08:42:14 (21 views) Where does the tensioner mount? in the top of the backrest? - TEB 2008-09-24 08:43:59 (20 views) you are not serious about getting 3 people with shoulder belts in the back of a B5 are you? - velosouljah 2008-09-24 12:03:49 (24 views) Yeah, where 3 people = my 10, 8, and 5 year-olds. - TEB 2008-09-24 14:20:29 (13 views) Yes - Casablanca Avant 2008-09-24 10:09:29 (18 views)
did i mess up my tb by cleaning it - thewatcher101 2008-09-24 08:21:11 (96 views) ermmm.. nm - über güber 2008-09-24 08:30:56 (134 views) stop clicking on the link... there's nothing there ;-) - über güber 2008-09-24 08:38:51 (25 views) It's ok, but don't use strait-up CARB cleaner. - Audi Junkie 2008-09-24 08:24:21 (29 views)
Is there a part number for the little plastic piece that keeps the seatbelt buckle from sliding down - Mica 2008-09-24 08:19:48 (29 views) Item #2? - TEB 2008-09-24 08:30:11 (83 views) Actually, might be item #12 a "knob" 443857847B - TEB 2008-09-24 08:33:47 (28 views) It should be located right here.... - Mica 2008-09-24 08:38:46 (63 views) That's where item #12 would be when the belt is retracted. I think that's the right p/n. - TEB 2008-09-24 08:41:47 (19 views) Ah! You're right! Thanks a lot. - Mica 2008-09-24 08:44:49 (19 views) Glad to help. They also show p/n 443857847B 4PK -- four pack perhaps? - TEB 2008-09-24 08:48:14 (21 views) 4PK is the colour code... - AudiLife 2008-09-24 10:16:28 (25 views)
Cloth Sport Seats - Recover or repair? - Cornerlot 2008-09-24 08:14:17 (39 views) search Carson at Riverside Audi and give him a call. - Casablanca Avant 2008-09-24 08:33:55 (19 views)
97 A4 2.8 Mass Air Flow Sensor Wires - maxxchon 2008-09-24 07:58:02 (37 views)
Paging AEB all experts! Is a K03 from an AMB motor the same as a K03 from an AEB? - B56 2008-09-24 06:56:49 (40 views) You can run it, but it is slightly larger (very slight) nothing will happen - ScratchRob13 2008-09-24 08:22:14 (16 views) as long as they are both longitudal motors its should be the same. - nunya 2008-09-24 07:48:28 (19 views) 2001 saw the K03 Sport turbo, but I'm not sure if that turbo became the everyday model on the B6. - Nate (Baba Ghanoush) 2008-09-24 07:02:24 (24 views) I pretty sure my b6 had the reg k03. I think the sport was only on the TT? - B56 2008-09-24 07:05:08 (24 views) no the '01 AWM definatly had a slightly different turbo, k03s... 225TT had k04 - ScratchRob13 2008-09-24 08:21:10 (17 views) I believe a K03 is a K03 but don't quote me. - Casablanca Avant 2008-09-24 06:57:40 (22 views)
Drivers side transmission mount - those that have changed it, remove just the mount or assembly? - RallyVermont 2008-09-24 05:49:31 (45 views) i got mine without taking the arm off... although i need to replace mine again i think... - ScratchRob13 2008-09-24 06:18:07 (32 views) LOL!!! I'm accessing it right now while the engine is out.. - RallyVermont 2008-09-24 06:30:19 (28 views) its a bolt that threads into the center of the mount. - ModifiedA4 2008-09-24 06:44:28 (26 views) I'll give it another go when I get home tonight. Thanks Chris. - RallyVermont 2008-09-24 07:11:04 (17 views) good luck, also put the nut and mostly tighten down the other connection on the mount - ModifiedA4 2008-09-24 07:49:19 (19 views) i had alot of difficulty with that bolt using the socket wrench in my kit. - ModifiedA4 2008-09-24 06:05:26 (31 views) I removed the arm - Monkeyboy 2008-09-24 06:16:27 (27 views)
Is it worth it for me to run 100 octane at the track while using a 93oct tune? Any benefits? - Hillbilly 2008-09-23 21:55:50 (43 views) It sure helps my chipped 1.8T with the 92 program! YMMV. - DWP 2008-09-24 14:49:10 (14 views) I might see you on Sunday.. - AaronBryan 2008-09-24 05:58:14 (39 views) Cool man! You know registration is closd now right........you can't just show up and expect to run - Hillbilly 2008-09-24 07:36:19 (31 views) If car is optimized for 93 running higher will hurt perf.. Specifically timing will no longer be - A400 2008-09-24 05:58:05 (60 views) interesting - Hillbilly 2008-09-24 07:40:44 (20 views) Good reasoning in theory, but I haven't had that experience. - Pat 2008-09-24 06:55:22 (45 views) Is that gain dyno proven. Chip must be optimized for higher than 93 then! - A400 2008-09-24 11:56:38 (25 views) Only butt dyno proven. An estimate based on lap times, logs and boost gauge readings. - Pat 2008-09-24 13:40:09 (16 views) Just saying if OPTIMIZED for 93 it will burn less effeciently w/100 - A400 2008-09-24 14:58:27 (12 views) Altitude reduces the need for octane. - Audi Junkie 2008-09-24 08:19:51 (19 views) Yeah, I know. Our premium here is 91. - Pat 2008-09-24 09:14:09 (19 views) Random Fact: Some stations in Idaho sell 89 as their premium. - tehaudi 2008-09-24 11:13:32 (16 views) and some stations in CO sell 85 as their regular - Silver Streakin' 2008-09-24 11:38:52 (12 views) Depends on how the car is tuned. - jprice@CPS 2008-09-24 07:00:10 (39 views) Yeah, just splashing the 93 with the race gas makes the most sense. - Audi Junkie 2008-09-24 08:22:04 (18 views) My car runs more timing and less boost than most K04'd cars. - Pat 2008-09-24 08:07:44 (19 views) in a 2.8 with SC? maybe...it should help any missing timing. dump a gallon of Toluene in when the - Silver Streakin' 2008-09-24 05:54:38 (35 views) BR has Sunoco fuels, I was goting to use the GT100, if worth it. I wish they made another tune. - Hillbilly 2008-09-24 07:40:17 (20 views) it would offset any time retard you have... log the car first. - WJM 2008-09-24 05:50:20 (30 views) What do I log? Timing? complete logging noob here....yes roadcourse, not strip. - Hillbilly 2008-09-24 07:39:01 (17 views) not worth the $$ w/out the tune... - AutoXJunkie (Justin) 2008-09-24 04:34:24 (23 views) okay - Hillbilly 2008-09-24 07:37:55 (15 views) It burns more slowly, driving the piston more smoothly and getting a lil more torque. - Audi Junkie 2008-09-23 22:17:25 (21 views) Uh.. Cant say I agree with that, but..... - A400 2008-09-24 11:57:50 (13 views) and torque = fun - Hillbilly 2008-09-24 07:37:32 (17 views) im going to say use the correct gas - thewatcher101 2008-09-23 22:16:04 (21 views)
Any Audi events going on central or northern Cali any time soon? Maybe even LA? - RoadSportAvant30VQSC 2008-09-23 21:35:30 (26 views) Cruise up to Portland for Quattrofest, Nov.1 and 2. Check out this - Omega Supreme 2008-09-24 07:30:00 (20 views) audiclubgoldengate.org or sccaudi,com - DWP 2008-09-23 22:13:20 (22 views) Check the NorCal Forum: - andysprague 2008-09-23 22:06:36 (17 views)
Where can I get some good blinker fluid? - jwood_a4 2008-09-23 21:20:58 (102 views) Here's the cheapest I've found: - Pscheoverdrive 2008-09-24 07:37:28 (59 views) lol i need some elbow grease, 6.95 isnt that bad for a tub. - jwood_a4 2008-09-24 08:36:33 (12 views) You still looking for one? - MonkeyLover 2008-09-24 07:03:27 (28 views) ygm. er actually i cant get to your email addy... - jwood_a4 2008-09-24 08:36:50 (20 views) Sure thing. YGM! - MonkeyLover 2008-09-24 11:24:21 (12 views) $35 at stealership. Dunno what carson would charge (shipping might make it more than going to local - Kingtr boost fixed! 2008-09-24 00:45:24 (31 views) cool, not bad at all.... - jwood_a4 2008-09-24 04:55:32 (24 views) Same place you buy a set of muffler bearings or a box of grid squares.. - RoadSportAvant30VQSC 2008-09-23 21:33:24 (47 views) They have muffler bearings, too... - Pscheoverdrive 2008-09-24 07:43:20 (19 views)
Anyone got a broken 1.8t ECU I can get cheap? - pac1085 2008-09-23 19:32:01 (60 views) How cheap? :) - BSCA4 2008-09-23 20:59:57 (18 views)
Unable to Start - No Turnover - Ketzu 2008-09-23 15:14:15 (94 views) Re: Unable to Start - No Turnover - audi01a6 2008-09-24 04:47:42 (27 views) diagnostics does not include a "TEST LIGHT" - screamin'pickle 2008-09-23 20:08:10 (46 views) Uh huh. - Joey T 2008-09-23 20:22:51 (46 views) What year is the car. - qfrog Ti20 2008-09-23 15:25:53 (26 views) Re: What year is the car. - Ketzu 2008-09-23 15:33:40 (59 views) I told you last night... - Joey T 2008-09-23 18:49:54 (62 views) I believe you told someone else - myers99A4Q 2008-09-23 18:59:05 (25 views) Well, that guy didn't listen either. - Joey T 2008-09-23 19:43:59 (40 views) Re: Well, that guy didn't listen either. - Ketzu 2008-09-23 20:54:36 (38 views) Stick or auto? - Joey T 2008-09-24 05:18:47 (22 views) get a friend w/ a truck and a tow rope... - Jretal 2008-09-24 04:55:08 (20 views) I don't think you have a starter inhibitor switch. - qfrog Ti20 2008-09-23 15:51:26 (25 views)
Just did a compression test on the A4. ~170 from each cylinder. Pretty normal for 123k right? - andysprague 2008-09-23 13:58:03 (181 views) my 200K+ mile Mazda has 170-180 but that's after I replaced its pistons/rings. It has 8.5:1 CR - Audiboy 2008-09-24 14:17:20 (15 views) Thats pretty solid....Anyone know what a 70k should be at? Im gonna do mine soon - Audi4orce 2008-09-23 18:24:39 (47 views) The same - bassed 2008-09-23 20:55:22 (18 views) Congrats! - RKA 2008-09-23 17:43:19 (54 views) Pretty effing great for 123k Andy. - bassed 2008-09-23 16:57:43 (25 views) Not bad at all. - Reggie 2008-09-23 16:51:35 (21 views) I should check mine too. I wonder how it's doing. - Digit@lex 2008-09-23 16:27:14 (22 views) That's what mine was at that mileage. - Pat 2008-09-23 14:06:27 (26 views) And now? - Kingtr boost fixed! 2008-09-23 20:40:46 (16 views) Haven't tested it since. I have not reason to believe it's any different at 220K. - Pat 2008-09-24 06:51:30 (14 views)
5-spd gearbox interchange info? - Cornerlot 2008-09-23 12:31:47 (78 views) the 2.8 works, and it has higher gears... better for the highway - ScratchRob13 2008-09-23 12:40:06 (34 views)
Problems when testing ICM. I show open loop for all cylinders when following instructions... - andysprague 2008-09-23 11:33:49 (94 views) No, you would get a constant misfire. That test just checks the continuity of the bonding wire to - Audiboy 2008-09-23 12:21:39 (45 views) I have already replaced all plugs with new (properly gapped) ones & replaced the coil pack... - andysprague 2008-09-23 12:33:00 (36 views) is your misfire on all cylinders or favors one or two? If just one or two, then at least you know - Audiboy 2008-09-24 11:15:38 (19 views) It is only cylinder 2 & I followed the procedure exactly. - andysprague 2008-09-24 21:24:56 (12 views) how about test the output of the ECU and ICM while idling. Use your meter on - Audiboy 2008-09-24 23:04:01 (13 views)
What do you think? - myers99A4Q 2008-09-23 11:32:56 (310 views) looks like you are getting the alignment much better. Using a trusty BFH to do it? - velosouljah 2008-09-23 12:12:21 (26 views) Mainly muscle and some help with a rubber BFH - myers99A4Q 2008-09-23 12:17:09 (22 views) I'm not sure I see much of a difference in any of the pictures... What exactly was your goal? - Kingtr limp n robbed 2008-09-23 11:52:47 (28 views) As Matt said fixing the gaps and getting the fender to line up better with the hood, bumper, door. - myers99A4Q 2008-09-23 11:59:12 (24 views) Ah, I see, yeah the gaps do look a bit better in the 2nd pics. I didn't know if you were working on - Kingtr limp n robbed 2008-09-23 12:01:16 (36 views) I had a post last week with details on what I was doing - myers99A4Q 2008-09-23 12:15:07 (19 views) Gotcha, I confess, I don't read every post on AW... - Kingtr limp n robbed 2008-09-23 12:54:45 (20 views) From what I can tell he is just fixing the gaps... - JUSTA4 -Matt 2008-09-23 11:56:53 (24 views)
N249 mod complete, can't really say I can tell any difference. - Casablanca Avant 2008-09-23 10:58:27 (44 views) the difference? the vac hose's routed differently! doh! - EDness 2008-09-23 11:25:51 (20 views) you'd only notice if the rate of boost was too quick... - ModifiedA4 2008-09-23 11:12:12 (47 views) mad boost, yo - Silver Streakin' 2008-09-23 11:08:36 (16 views) honestly shouldn't feel it... those b6 guys were talking out there buttz - ScratchRob13 2008-09-23 11:07:51 (27 views)
Bad N75 Solenoid - tippmann316 2008-09-23 10:49:01 (63 views) Cleaned Terminals in connector. - tippmann316 2008-09-23 11:51:27 (36 views) Yeah I just finally fixed my N75 issue. Power was good up till the actual connector (at the N75) - Kingtr boost fixed! 2008-09-23 11:58:47 (34 views) Yup. Cleaned connector. No more misfires. - tippmann316 2008-09-24 19:29:36 (19 views) Why not start with the misfire? Swap cyl 2 coilpack w/ another cyl and see if the misfire jumps. - Kingtr limp n robbed 2008-09-23 11:02:57 (20 views) Yeah. Thought of that. Will do before I purchase new part. - tippmann316 2008-09-23 11:04:48 (17 views) Checked Ohms and have 28.4 - tippmann316 2008-09-23 11:02:44 (26 views) Trial and Error, replace it and report back with results - myers99A4Q 2008-09-23 11:00:51 (16 views)
my a4 is 115,000 miles old...how do u know if the turbo is about to go??? - audi1.8t4life 2008-09-23 10:26:09 (70 views) You start by learning how to spell the word 'you'. - Mica 2008-09-23 10:43:48 (31 views) Unlikely you'll know. It either works or it doesn't. By the time you know it's too late. - Pat 2008-09-23 10:39:43 (29 views) Smoke out the tail pipe. Most likely is the vac lines. After 115k miles, they're pretty old - Nate (Baba Ghanoush) 2008-09-23 10:37:42 (57 views) Vac lines would be a good guess, especially if they're original. - Pat 2008-09-23 10:41:10 (51 views)
have to replace catalytic converter...any tips goin in to the job? - audi1.8t4life 2008-09-23 10:13:48 (51 views) u need a stubby 17" open wrench to get bottom bolt of cat flange off - ianbis 2008-09-24 16:31:02 (15 views) I have an OEM cat that is nearly new. I'd be interested in selling it. - 4Driver4 2008-09-23 13:42:15 (23 views) When I did mine . . - myers99A4Q 2008-09-23 10:57:19 (62 views) yup - BSK auf Arbeit 2008-09-23 10:14:43 (50 views) and PB blaster - ScratchRob13 2008-09-23 10:52:46 (18 views) aerokroil is the best... hands down - BSK 2008-09-23 15:13:26 (23 views) true, but i find it hard to come by in the stores, and don't bother ordering offline... - ScratchRob13 2008-09-23 15:31:01 (24 views) spread the word! - BSK 2008-09-23 20:09:11 (18 views)
Show me your racks - Mr Paul [T-28] 2008-09-23 09:47:16 (307 views) Thule here... - hman_a4 2008-09-24 15:31:40 (50 views) Yak + bike - Andy_FL 2008-09-23 18:37:32 (110 views) Yes, I would definately like to buy used but I am having trouble finding anybody selling. - Mr Paul [T-28] 2008-09-24 06:15:55 (19 views) Think I can get rid of my Yakima Q-Towers... - velo 2008-09-24 15:36:13 (20 views) nice bike - SBGTi96 2008-09-23 21:16:35 (19 views) I had to laugh...this sounds like an AWOT thing ....LOL - B5Davem 2008-09-23 16:17:13 (25 views) Here's my Thule rack and gear. - AEKDB [Arawan] 2008-09-23 15:48:55 (122 views) All that being said, anybody know of anyone selling? Just wondering before I buy new. - Mr Paul [T-28] 2008-09-23 14:18:53 (24 views) probably not fair for me to play..... you know having an avant and all.... - Casablanca Avant 2008-09-23 10:57:54 (35 views) yeah, you don't get to play :) - Mr Paul [T-28] 2008-09-23 11:25:00 (26 views) I have Yakima - velo 2008-09-23 10:46:31 (166 views) Where did you get that decal? got the same rack, looks awesome with the decal. - Sean_P 1.8T 2008-09-23 21:15:45 (20 views) 2nd!!! that's bad azz!!!! - hman_a4 2008-09-25 13:54:25 (8 views) Got it on eBay a few years ago, from a company called Custom Edge Graphics - velo 2008-09-25 16:18:50 (7 views) I roll with uber gear...... - TighTT 2008-09-23 10:20:22 (195 views) lol my box is as big during the winter... 2 pairs of race skis and 1 freeride... - ScratchRob13 2008-09-23 10:31:42 (50 views) Thule... with aero feet, to help wind noise... also get the fairing or else the bars are loud! - ScratchRob13 2008-09-23 10:08:48 (125 views) I found the fairing just makes more noise. - rookie18 2008-09-23 10:08:26 (167 views) Get the old style larger fairing. If properly positioned it works great, and rests on glass. - Pat 2008-09-23 10:38:30 (49 views) yea get the wide one, i had to redrill holes to line up but fits alot better without the side wings - ScratchRob13 2008-09-23 10:48:26 (29 views) What is the part number??? - Omega Supreme 2008-09-23 10:45:11 (28 views) ? - Pat 2008-09-23 11:32:58 (23 views) Thule part number,, they have different ones for the fairing lengths. - Omega Supreme 2008-09-23 11:34:32 (25 views) The fairing makes more noise?? Dang i was going to pick one up at lunch. - Omega Supreme 2008-09-23 10:24:07 (27 views) i completely disagree... having run both ways.. at highway speeds without it there is a howl! - ScratchRob13 2008-09-23 10:32:26 (28 views) WHAT about with the sunroof open. I know that mine is howling now with out the fairing.. i tried - Omega Supreme 2008-09-23 10:35:23 (34 views) no sunroof here :p - ScratchRob13 2008-09-23 10:46:55 (24 views) the fairing feet have foam pads on the end if you read the instructions... - ScratchRob13 2008-09-23 10:11:45 (50 views) a comment..... - 77'911 2008-09-23 09:57:18 (185 views) depends of the type of attachements you have - hman_a4 2008-09-25 13:58:06 (8 views) I didn't know factory bars were available on sedans. Thanks. - Mr Paul [T-28] 2008-09-23 10:00:55 (39 views) a response..... - 77'911 2008-09-23 10:58:00 (54 views) I personally am anti roof rack. Ski sock and minimum of passengers FTW... - velosouljah 2008-09-23 09:54:24 (50 views) Ski sock is too small for 3 snowboards, even too small for 1 IIRC - Mr Paul [T-28] 2008-09-23 09:59:44 (48 views) sorry that was mostly sarcastic. If you must get a roof rack I'd go with Thule - velosouljah 2008-09-23 10:08:23 (43 views) no worries, I knew you were being mostly sarcastic. thanks for the pronunciation - Mr Paul [T-28]* 2008-09-23 10:13:06 (29 views)
Accident Update Numero Uno - naudi1.8 2008-09-23 09:23:37 (244 views) So, do I win the cookie? - TEB 2008-09-23 09:46:33 (49 views) cookies are bad.. how about some fruit? lol - naudi1.8 2008-09-23 10:57:50 (82 views) estimate...wait for the final bill - Silver Streakin' 2008-09-23 10:19:10 (21 views) estimate 2300.. final bill 4600... going to see his insurance company estimater today. - naudi1.8 2008-09-23 11:00:11 (26 views) ours was off by $150.00 in their favor, go figure. They are taking care of it though - velosouljah 2008-09-24 18:30:18 (9 views) LAWL ^^^^^ WINNNARR - BOOO LOOOSER VVVVVVVV - RallyVermont 2008-09-23 09:49:23 (20 views) Meh. It is silver. Just leave it how it is. - Mica 2008-09-23 09:31:40 (21 views) make sure you are looking at shops accredited with your insurance, or the other drivers insurance - RallyVermont 2008-09-23 09:31:20 (37 views)
It appears that StopTech said "uncle" and will be unable to repair my calipers. they are now paper - Silver Streakin' 2008-09-23 09:16:09 (159 views) Take Stop-Tek money and buy Alcons, I am very happy with them - A400 2008-09-24 13:36:40 (12 views) Did you consider... - qfrog Ti20 2008-09-23 15:48:23 (54 views) yes, it's the custom part and dealer prices that would probably price it out more, no? - Silver Streakin' 2008-09-23 16:47:48 (34 views) I don't know what your alternative options cost - qfrog Ti20 2008-09-23 17:00:27 (34 views) well, the cheapest is yet again the same issue... - Silver Streakin' 2008-09-23 17:41:11 (31 views) **So, what would a set of Stoptechs be worth that are brand new calipers and good hats/rotors with - Silver Streakin'** 2008-09-23 12:54:04 (49 views) I'll trade you Boxster calipers w/ appropriate brackets, A8 Rotors and 2 sets of pads ;) - Jretal 2008-09-24 05:36:34 (23 views) 'bout..... - TEB 2008-09-23 15:19:23 (19 views) tree fiddy - B5Davem 2008-09-23 20:38:05 (23 views) If you do a search for "Stoptech sucks" on both B5 forums, you'll probably get about 1000 hits - Mirror\|rorriM 2008-09-23 11:21:48 (44 views) i swear stoptech became a fad on the forum.... and now the new fad is to call them down :) - Im@wesome 2008-09-23 11:48:42 (25 views) Stoptech gave my dog the runs. - Audi Junkie 2008-09-23 12:49:14 (15 views) They were less a fad and more the only show in town - Mirror\|rorriM 2008-09-23 12:00:23 (19 views) Big Reds are always an option for Audis - A400 2008-09-24 13:39:07 (9 views) agreed. there was no Alcon application, and Brembos weren't supplied by many and $$$$ compared to ST - Silver Streakin' 2008-09-23 12:03:17 (26 views) I thought my car had Alcon b's since the early days when APR was mucking around with it?? - A400 2008-09-26 09:40:51 (15 views) If you have APR's "stage 3" brakes, they were based on the StopTech/Porsche caliper. - Silver Streakin' 2008-09-26 11:59:51 (11 views) But But I like mine! - RallyVermont 2008-09-23 12:08:42 (44 views) I don't get it, did you damage something? If not, this should all be on Stop-Tech. They should.... - TEB 2008-09-23 10:03:25 (35 views) oh, did you know that track use voids their warranty? - Silver Streakin' 2008-09-23 10:48:46 (26 views) Lol...reminds me of the FD apex seal failure cases, and the Evo, Lotus elise warranty - pentosinjunky 2008-09-24 00:06:12 (27 views) Isn't that the reason for them? I'm confused.......they should send you new ones. - Hillbilly 2008-09-23 11:15:19 (22 views) What?!? Isn't that their purpose? Or, are they just for show? Perhaps you found that answer. - TEB 2008-09-23 11:02:14 (18 views) No. I used the brakes as the brakes are to be intended to be used. replaced pads as necessary - Silver Streakin' 2008-09-23 10:15:31 (49 views) What's their stated warranty on their brakes? - TEB 2008-09-23 10:49:19 (18 views) If it costs you a dime going forward, it's probably time to cut your losses. - RKA 2008-09-23 09:45:07 (49 views) I'm confused... are they willing to ship you a replacement caliper set ? - freakness 2008-09-23 09:24:03 (42 views) yes, but at what cost, I do not know yet. - Silver Streakin' 2008-09-23 09:30:23 (49 views) They shouldn't charge you SHT in my opinion.... - freakness* 2008-09-23 09:33:24 (55 views) 2nd that. Stoptech was always good to work with while I had their BBK on my A6 - DWP 2008-09-23 09:58:54 (20 views) My recommendation: get boxster calipers - Mr. Mom 2008-09-23 09:22:34 (47 views) Or step up to some 996 Calipers...OEM Porsche Brembos are hard to beat. - Carson@RiversideAudi 2008-09-23 11:49:29 (45 views) Good to see that we've converted you :-D - Mirror\|rorriM 2008-09-23 12:12:39 (22 views) The GTI must be sold first Jeff, after it goes is when we can start celebrating. - Carson@RiversideAudi 2008-09-24 09:22:11 (18 views) so what brought this on? - Jretal 2008-09-25 04:15:20 (10 views) A step down for track performance if I understand correctly.... - freakness 2008-09-23 09:25:06 (59 views) why do you make me waste a click? - Silver Streakin' 2008-09-23 09:33:11 (55 views) . - freakness 2008-09-23 09:37:15 (41 views)
Anyone have experience with the Stasis Center Diff. Upgrade? Effective? Good value? It seems... - d1rt [A4 Pröjekt] 2008-09-23 09:15:08 (43 views) Diff = Good - M.S.G. 2008-09-23 09:30:28 (48 views) reminds me... install that diff. Would the STaSIS SS be an upgrade over KWv1? - Silver Streakin' 2008-09-23 09:18:01 (50 views) seriously dude...get that diff in the car...NOW! - AutoXJunkie (Justin) 2008-09-23 15:12:32 (31 views) finding time is the issue - Silver Streakin' 2008-09-24 06:05:14 (15 views) did Mr. Head give you the low-down on how my car drives yet? - AutoXJunkie (Justin) 2008-09-24 15:05:59 (14 views) So that's a thumbs up on that Diff? - d1rt [A4 Pröjekt] 2008-09-23 09:19:54 (23 views) Found it.... - d1rt [A4 Pröjekt] 2008-09-23 09:29:56 (30 views)
Spray Bomb! My painting project of late. - über güber 2008-09-23 09:03:25 (175 views) have you tried 2 stage paint from paintscratch.com? - mktbully 2008-09-23 09:26:12 (35 views) Silver is commonly referred to as the toughest color to match. Good luck. - Hillbilly 2008-09-23 11:26:57 (25 views) generally metallics and pearls are harder to match - mktbully 2008-09-23 13:28:14 (20 views) I know! However, I knew full well what I was getting into beforehand. - über güber 2008-09-23 13:06:27 (22 views) I've never tried them. I may look into it. Thanks. - über güber 2008-09-23 09:31:20 (13 views)
$1600 for a clutch installed on a 98 30v should i be shocked cause I am - qpower 2008-09-23 08:26:41 (48 views) Depending on the parts and labor rate - that could be about right. give or take $300 - RallyVermont 2008-09-23 09:44:28 (22 views) a comment.... - 77'911 2008-09-23 09:14:30 (121 views) thanks for your help, a 3rd opinion tells me the only thing wrong is the slave and master - qpower 2008-09-23 10:36:28 (32 views) a response..... - 77'911 2008-09-23 11:09:28 (34 views) yeah, i understand i'm hoping it works out the car has been very well cared for - qpower 2008-09-23 11:38:03 (17 views) I love that picture. - Nate (Baba Ghanoush) 2008-09-23 10:34:39 (24 views) a response.... - 77'911 2008-09-23 11:18:54 (69 views) There's that too. Low noise and distortion from the lens helps a lot. - Nate (Baba Ghanoush) 2008-09-23 11:39:17 (13 views) 300 clutch kit, 500 new OEM flywheel....8 ish hours labor and misc parts - pentosinjunky 2008-09-23 09:07:52 (37 views) sounds about right from what I checked into from the Shop that I've been going to... - velosouljah 2008-09-23 08:28:26 (20 views) For as much work that's involved, not really. Is that for a dealer or indy shop? - Nate (Baba Ghanoush) 2008-09-23 08:27:41 (21 views) independent not an audi specialist by any means but since a clutch kit is about $300 - qpower 2008-09-23 08:41:43 (34 views) I will hopefully have a 2nd DD and do this work myself by the time I need to do it... - velosouljah 2008-09-23 08:44:55 (23 views) 2008 Motor says 7 hours for AWD. Be glad you don't have the 2.7 A6, that takes 16 hours. - Nate (Baba Ghanoush) 2008-09-23 08:56:41 (16 views)
Induktion Motorsports Presents: H2O 2008 Specials! GIAC / AWE / STACK / EVO / More!! - Anand@4Induktion.com 2008-09-23 08:14:44 (96 views) My experience with carbotech has been poor - Mr. Mom 2008-09-23 09:36:33 (27 views) This is certainly not the norm... - Anand@4Induktion.com 2008-09-23 10:50:07 (23 views) Seeing that this is the only set of pads that have ever worn out so fast - Mr. Mom 2008-09-23 11:23:54 (22 views) That is exactly the opposite of what I've heard. Damn. What pads did you have on the rear? - TEB 2008-09-23 09:43:03 (20 views) HP+ - Mr. Mom 2008-09-24 10:53:55 (20 views) Well, I'm running Ferrodos front and rear and like them a lot. - TEB 2008-09-25 07:52:46 (10 views) people should go up the road to NJMP to watch the Induktion sponsored TDi Cup car race. I hope to. - Silver Streakin' 2008-09-23 08:58:49 (15 views) Is the pricing available for those of us who can't make the show? - TEB 2008-09-23 08:23:08 (22 views) 2nd on the prices. Also... - velosouljah 2008-09-23 08:42:26 (27 views) Certainly can be done on the 30v! - Anand@4Induktion.com 2008-09-23 10:47:16 (21 views) so I'd have to physically be there at the show; there is zero chance of that but not because I don't - velosouljah 2008-09-23 11:34:40 (18 views) Give us a call at the shop, 410-684-3900 - Anand@4Induktion.com 2008-09-23 14:38:14 (13 views)
Holy LOL at my coworkers... - velosouljah 2008-09-23 06:35:33 (254 views) Hehehe!!! Nice! Networking Company? Communications? ;-) - über güber 2008-09-23 10:18:09 (16 views) Independant Phone Company - velosouljah 2008-09-23 10:29:57 (17 views) haha, 91 octane pushing $4/gal, ungimp pass side mirror $30+ship, amount and time - myers99A4Q 2008-09-23 06:41:47 (79 views)
yup, its the clutch 30v so how much should this cost? - qpower 2008-09-23 05:35:38 (20 views) DIY, dealer, or indy shop? - Nate (Baba Ghanoush) 2008-09-23 08:08:54 (18 views)
My New Background... - ScratchRob13 2008-09-22 23:11:04 (305 views) What's with the crooked angle? - Mica 2008-09-25 08:52:35 (5 views) Thats been the wallpaper for my desktop for forever - B5Davem 2008-09-24 19:13:28 (7 views) Is it really necessary to slander 56k users these days? - Mica 2008-09-23 07:18:17 (45 views) One of my customers is on 56k dial-up because of DSL problems.... - freakness 2008-09-23 07:42:04 (40 views) I can't get highspeed where I live. I don't consider the satellite internet highspeed... - Kris Hansen 2008-09-23 08:12:33 (33 views) From her house she can look into Silicon Valley.... - freakness 2008-09-23 08:38:30 (26 views) The satellite I used in Canada a few weeks ago BLEW. So slow. - Mica 2008-09-23 08:37:15 (17 views) Probably similiar to dial-up speed.... did you test it ? - freakness 2008-09-23 08:39:46 (19 views) Not really slander, more just offensive. - Kris Hansen 2008-09-23 07:27:22 (16 views) Hotlinking sucks. - Kris Hansen 2008-09-23 05:36:39 (64 views) I had no idea what the hell hotlinking was... i'm the n00b... fixed it though - ScratchRob13 2008-09-23 16:32:55 (35 views) 2nd - Silver Streakin' 2008-09-23 07:24:24 (14 views) /stolen - pentosinjunky 2008-09-23 03:09:18 (28 views) Yep, mine too. I just stole it, deal with it. - Hillbilly 2008-09-22 23:36:22 (56 views)
freakness... did you see this built 2.0 B5 A4 Avant in the classifieds? - Silver Streakin'&n