BSK

<center><img src="https://www.audiworld.com/tech/pics/elec120-radio_speedo_wire.jpg"></center><p>
if you read on on my TT install in my sig i mentioned that i will hook up the speedometer cable to get a kmh readout on the TT.
here it is:
<img src="https://www.audiworld.com/tech/pics/elec120-symphony_pin_layout.jpg">
the GA pin is the geschwindigkeits abhaengige lautstaerken regelung or in plain english the speedo cable from the radio that you will tap into. its a blue/white cable.
cute the cable and splice the pink speedo cable from the turbo timer into it and you are done. btw the radio should be disconnected to do that just pulled out =)
in order to get the correct speedo to display on the TT you need to programm it.
hit P and S at the same time while in speedo mode.. the display should be Red and SET and 40kmh will be displayed. get the car up to 40kmh and hit the T button twice until the display stops flashing and 40mkh is displayed... thats it you are done.
good luck

g_match

You are great! thankyou!

PocketRocket_1.8T

Hey Stephan is that all you need to install speedometer functions?

BSK

yes thats all you need

Rosati

you make the readout in kmh? what about mph?

BSK auf Arbeit

who needs mph?