Fender bumper screw
#1
Fender bumper screw
Does anyone know the part number for this screw and/or where I can procure? I misplaced while doing front bumper remove/replace. The fasteners in this photos are what you remove from each wheel well to remove front bumper. The highlighted screw is the one behind the wheel well cladding that requires an extension and a T30 bit.
#3
I could not for the life of me find the part number outside the kit...
https://www.genuineaudiparts.com/oem...k4LTYyOQ%3D%3D
https://www.ilcats.ru/audi/?function...50&language=en
EDIT: Closest I could find is this... N10725401
https://www.genuineaudiparts.com/oem...k4LTYyOQ%3D%3D
https://www.ilcats.ru/audi/?function...50&language=en
EDIT: Closest I could find is this... N10725401
Last edited by mbudden; 08-29-2021 at 07:14 PM.
#4
AudiWorld Senior Member
If you have one of the screws, go to Lowes/Home Depot with the screw and find a matching one. Looks like a standard metric thread panhead screw. It likely won't be Torx head, but it'll be much cheaper than the dealer parts counter.
The following users liked this post:
1killera4 (05-03-2023)
#5
AudiWorld Super User
For the B8.0, the part catalog correctly details all the bolts holding the bumper cover to the car.
For the B8.5, when they separated the drawings of the bumper and bumper cover into separate pages, they also just lumped all the hardware into a "1 set fixing parts for bumper" bs. Need a replacement bolt, it's here in our $100 hardware kit for the bumper.
For the B9.0, it appears they've carried on that same concept of customer disservice. You can see the 8W version, 8W0 098 623, here - https://www.ebay.com/itm/193665204144
So presuming this is the bolt you're referring to: youtu.be/jeMW-EowOHo?t=88
The same purpose on the B8 is a 10mm hex head M6x25 bolt, N10160204, as seen here: https://www.ecstuning.com/b-genuine-...olt/n10160204/
But it seems they changed that bolt to the one you show, which we seem to see in the third row, third from left in the kit pic from eBay.
The N10160204 is listed as M6x25mm. The N10725401 referenced by mbudden is M6x20mm. You'd need to verify the actual length of the threaded section to confirm which bolt might be more suitable as a substitute.
For the B8.5, when they separated the drawings of the bumper and bumper cover into separate pages, they also just lumped all the hardware into a "1 set fixing parts for bumper" bs. Need a replacement bolt, it's here in our $100 hardware kit for the bumper.
For the B9.0, it appears they've carried on that same concept of customer disservice. You can see the 8W version, 8W0 098 623, here - https://www.ebay.com/itm/193665204144
So presuming this is the bolt you're referring to: youtu.be/jeMW-EowOHo?t=88
The same purpose on the B8 is a 10mm hex head M6x25 bolt, N10160204, as seen here: https://www.ecstuning.com/b-genuine-...olt/n10160204/
But it seems they changed that bolt to the one you show, which we seem to see in the third row, third from left in the kit pic from eBay.
The N10160204 is listed as M6x25mm. The N10725401 referenced by mbudden is M6x20mm. You'd need to verify the actual length of the threaded section to confirm which bolt might be more suitable as a substitute.
#7
Trending Topics
#10
AudiWorld Super User
Nice find. The ETKA clone sites don't provide a repair kit (x98 for the middle digits) component breakdown listing like that. Just one of the many functions you need real ETKA or active partslink24 subscription to access.
Thread
Thread Starter
Forum
Replies
Last Post
RamonS4NJ
S4 / RS4 (B5 Platform) Discussion
1
08-31-2000 07:45 AM