ernestolopez

Looking for DIY and pics if possible on how to dismantle rear valance.I have a B8 2010 single outlet on left rear bumper.

I got underneath the car and see 3 to 4 screws that hold the valance.Then I see that its securely attached by way of a slotting system.Im not sure how to remove it.I see the screws,but not sure about the rest.Please anyone with KNOWLEDGE,provide insight.Thanks

AofC_RR

It's really pretty simple. You just need to use something to CAREFULLY push down on one of the tabs and start popping it loose and it should pull out with a little carefully directed effort. Me and a tech complete dismantled the rear valence and exhaust in under 20 min. Took a total of about 45 min to do an AWE dual exhaust install with downpipe with 2 guys.
I'd say start at the non-outlet side and work over from there.

ItsDubC

It was actually a PITA for me. The "teeth" were hanging on pretty well (which is a good thing I suppose ) Start from the center and work outward.