Put the wagon on the new Dynapacks at the shop and here are the results
10-27-2008, 10:32 PM
#1
AudiWorld Super User
Thread Starter
Join Date: May 2005
Posts: 2,740
Likes: 0
Received 0 Likes
on
0 Posts
Put the wagon on the new Dynapacks at the shop and here are the results
base Eurodyne gt3076 630cc file
Chevron 94 octane
349awhp 318lbft tq @ 25psi in 4th gear
orange = EBC turned off and wastegate spring only ~ 9psi
green = 14psi
pink/purple = 18psi
blue = 25psi
Can't wait to get the updated file and see how the numbers improve.
<img src="http://members.shaw.ca/myaudi5/dyno/Image.JPG">
<img src="http://members.shaw.ca/myaudi5/dyno/Image1.JPG">
<img src="http://members.shaw.ca/myaudi5/dyno/Image2.JPG">
Chevron 94 octane
349awhp 318lbft tq @ 25psi in 4th gear
orange = EBC turned off and wastegate spring only ~ 9psi
green = 14psi
pink/purple = 18psi
blue = 25psi
Can't wait to get the updated file and see how the numbers improve.
<img src="http://members.shaw.ca/myaudi5/dyno/Image.JPG">
<img src="http://members.shaw.ca/myaudi5/dyno/Image1.JPG">
<img src="http://members.shaw.ca/myaudi5/dyno/Image2.JPG">
10-27-2008, 11:09 PM
#3
AudiWorld Super User
Thread Starter
Join Date: May 2005
Posts: 2,740
Likes: 0
Received 0 Likes
on
0 Posts
Considering the updates are free if I send in the data I don't know what better option is out there
REVO is crap as their base file is just not close to being stable for my setup this is what I have to do to get the file for my hardware.
Considering this was a base map on the ECU with no tweaks we didn't push the car as hard as we could but I think the results are impressive.
Considering this was a base map on the ECU with no tweaks we didn't push the car as hard as we could but I think the results are impressive.
