B6 S4 Recaro seats in a B6 A4? Has it been done?
#1
Audiworld Junior Member
Thread Starter
B6 S4 Recaro seats in a B6 A4? Has it been done?
Hey guys.
I would like to put 2004 B6 S4 Recaro seats in my 2005 B6 A4 1.8T.
I searched here and the net and can not find any threads regarding this retrofit.
I need to know what cables/connectors etc... that I need for this and if adding the memory control on driver door has been done and is possible.
I stumbled across threads where B5 guys wanted them but no actual install threads related to the B6.
Can any of you point me in the right direction to sites or provide links to any buld threads that you know of?
Thanks.
I would like to put 2004 B6 S4 Recaro seats in my 2005 B6 A4 1.8T.
I searched here and the net and can not find any threads regarding this retrofit.
I need to know what cables/connectors etc... that I need for this and if adding the memory control on driver door has been done and is possible.
I stumbled across threads where B5 guys wanted them but no actual install threads related to the B6.
Can any of you point me in the right direction to sites or provide links to any buld threads that you know of?
Thanks.
The following users liked this post:
Dolphin Gray Usp (10-04-2019)
#4
Audiworld Junior Member
Thread Starter
Thanks heateris.
I have a full power driver seat in my 1.8TQ USP and a manual sliding pax seat with the one power dial for lumbar in the right seat.
Do I need to add fuses in the existing fuse boxes or what? Any chance you have a link with some pictures and/or instructions that you could provide?
Also, do I need any cables/wiring harness to hook up or are they already under my stock seats?
I have a full power driver seat in my 1.8TQ USP and a manual sliding pax seat with the one power dial for lumbar in the right seat.
Do I need to add fuses in the existing fuse boxes or what? Any chance you have a link with some pictures and/or instructions that you could provide?
Also, do I need any cables/wiring harness to hook up or are they already under my stock seats?
#5
Audiworld Junior Member
Thread Starter
FYI - I found it on zine for those interested. Here's the link.
http://www.audizine.com/forum/showth...or-Memory-Tilt
http://www.audizine.com/forum/showth...or-Memory-Tilt
#6
AudiWorld Super User
Join Date: May 2004
Location: SEPA
Posts: 3,645
Likes: 0
Received 0 Likes
on
0 Posts
you should have no problems then. simple DIRECT swap. you'll just need to upgrade the 10amp fuse in the passinger side footwell to a 30amp. it's behind the lower A-Piller cover.
#7
AudiWorld Super User
Join Date: May 2004
Location: SEPA
Posts: 3,645
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
AJN334
S4 / RS4 (B5 Platform) Discussion
11
10-28-2004 05:44 AM