What is involved with dropping both catalytic converters and replacing?
#1
What is involved with dropping both catalytic converters and replacing?
I don't have access to a lift, and need to replace all hardware (clamps, nuts, gaskets).
Cost?
Difficulty?
Time?
Cost?
Difficulty?
Time?
#5
Maybe I should rephrase it this way...
Is this all correct?
I need these
<img src="http://img103.imageshack.us/img103/9251/catsqa8.jpg">
&_____________________________________________ ________________
<img src="http://img110.imageshack.us/img110/1844/hardwaregd0.jpg">
&_____________________________________________ ________________
<img src="http://img517.imageshack.us/img517/4885/oxygenqq4.jpg">
&_____________________________________________ ________________
<img src="http://img104.imageshack.us/img104/3299/splicewf9.jpg">
&_____________________________________________ ________________
For Reference_________________________________________ ____________________
<img src="http://www.vagcat.com/p/B195/253750.png">
I need these
<img src="http://img103.imageshack.us/img103/9251/catsqa8.jpg">
&_____________________________________________ ________________
<img src="http://img110.imageshack.us/img110/1844/hardwaregd0.jpg">
&_____________________________________________ ________________
<img src="http://img517.imageshack.us/img517/4885/oxygenqq4.jpg">
&_____________________________________________ ________________
<img src="http://img104.imageshack.us/img104/3299/splicewf9.jpg">
&_____________________________________________ ________________
For Reference_________________________________________ ____________________
<img src="http://www.vagcat.com/p/B195/253750.png">
Trending Topics
#8
just take it to a exhause shop and get new flex joints put on..
it will only be about $130 per side and be done with it for now unless your cats are really bad.. i also have a 96 a4 2.8qm and just had a new flex joint put on the pass side about 2 weeks ago i can give you the place if you like.. in shawnee ks it cost me $130 for one side i had them do the other side about 3 years ago and its still good ..
#10
yeah, def a better way to go!
I spent $20 on a flex joint and had midas weld one in for me for $50 (out the door). I ended up having to go back in there to reweld as the monkey didn't get the weld hot enough and it just flaked/rusted off 6 months down the road... but still, much cheaper than replacing everything!