turbo944s2

I started piecing together a Turbo kit. I have a Pes manifold, a gt28r, tt225hp injectors, a labree shotgun test pipe, an apr exhaust, fidanza flywheel and a southbend dxd clutch. I need some installation instructions for a pes kit or a atp kit. So I can see the other stuff i need to buy, and how the oil and coolant lines attach to the turbo. If any one has these instructions or some pictures of where the lines come from or the length of the lines, it would be greatly appreciated. Thanks in advance

Rosati (Ginzo)

<center><img src="http://img.photobucket.com/albums/v673/Rosati/04-20-07_2305.jpg"></center><p>
<a href="http://photobucket.com" target="_blank"><img src="http://img.photobucket.com/albums/v673/Rosati/04-20-07_2337.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>


just go to atp's website and see what you dont have from their Stage 3 kit

I also think those injectors arent gonna cut it

Get some 440s at least www.usrallyteam.com<ul><li><a href="http://www.atpturbo.com/root/help/pdf/install/StageIILongitudinal.pdf">Gt28R from ATP.....</a></li></ul>

turbo944s2

The injector part numbers are 0 280 155 893 they are supposed to put out 380cc at 3 bars, and 440 at 4 bars. You know how the full atp gt28rs kits have all stainless braided lines. Im trying to find out the lengths so I can use them on my kit. Im probably going to have to rip the car apart, and measure them myself. Someone meantioned on the forum about swapping the 8mm pes studs for 10mm studs, do you know the length I need?

Rosati (Ginzo)

and napa had the exact fit