Go Back   AudiWorld Forums > Audi Models > Audi A4 > A4 (B5 Platform) Discussion
Sign in using an external account
Register Forgot Password?


A4 (B5 Platform) Discussion Discussion forum for the B5 Audi A4 produced from 1995-2001 B5 FAQ

Welcome to AudiWorld Forums!
Welcome to AudiWorld.com.

You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the AudiWorld Forums community today!


Reply
 
 
 
 
LinkBack Thread Tools Search this Thread Display Modes
Old 01-18-2006, 08:47 PM   #1
BSK
AudiWorld Super User
Account #: 54666
 
Join Date: Apr 2003
Posts: 16,815
Default DIY: 1.8t Coolant Flange Removal and re-installation instructions on AEB others should be the same

So if you have been loosing coolant, had a coolant burning smell after a long drive or just happened to look down towards the back of the engine in between the firewall and noticed some pink crusting; then it's most likely time for a coolant flange job.


Picture by Andy TN showing some pink crust

The coolant flange holds the ECT (Engine Coolant Temperature Sensor) and is connect to the back of the engine head. It's a simple but semi hard to reach job but it's definitely DIY.

Let's get started:


Old vs. new. This side is the R side that will connect to the big black coolant pipe. Make sure you have a gasket in there


Coolant flange is semi installed. It's hanging in there loose


This side shown is the side that will attach to the engine, make sure that the gasket is installed and not torn... this is a leak area


The new flange with the temp sensor installed but no gasket between flange and engine


ETKA explosion diagram of the coolant flange and its connections


Some of the old coolant flanges will only have ONE port. The new ones that are sold come with a second port, that is seen PLUGGED in this picture. Make sure you have either an old temp sensor or the dummy plug from the dealer to fill the second port.

OK so now that you know how the coolant flange looks and where it connects to its time to get dirty:

You will loose some coolant during this procedure; it is also a good idea to replace the ECT as well while you are doing this.
You could either drain the engine coolant at the water pump or just leave whatever you have in there and see how much comes out.
I did the replacement on an engine that had all the coolant drained and replaced with brand new G12. Either way, make sure that the Engine is COLD or you will get burned.

Disconnect the cable leading to the ECT by squeezing the metal and pulling it off. You can leave the ECT in the flange or remove it. To remove it pull the small plastic U shaped clip out towards the firewall and then pull up on the ECT. You will have some coolant coming out right now.

I can't remember for sure if I had 6mm hex bolts of 8mm ones. But you need to remove 2 bolts that attach the coolant flange to the engine and another 2 that attach the flange on R side (looking from the front) to the black hose.


The picture to remind you. After you have those bolts loose you will have some more coolant come out. Pull the flange away from the engine block and also out of the black hose. The only connection that is left now will be the bottom hose.

In order to remove the bottom hose from the flange you will have to pull away a clip from the hose that will be on the flange. Make sure that you try to catch this clip as it will be flying away; it's very small and hard to find. After you have pulled the clip, hold the hose with one hand and pull on the flange with the other hand.
The flange will pop out with enough force.

Take your new flange and transfer the dummy plug and or new ECT from the old to new if needed.
You hopefully have 3 or 4 O-Rings depending on the flange. One O- Ring goes in between the flange and the engine, the other one goes between the flange and the black hose and the 2 other ones are for the ECT and the dummy plug.



Installation is in the reverse order. Make sure that when you tighten the bolts back up so just barely hand tighten them until everything is connected. Tighten them down a little bit at a time so the flange is not crocked installed.
Replenish the coolant lost, start the engine and check for leaks.

When i removed the old flange I didn't see any physical damage to it, so it might just be the O rings that are failing.

good luck
__________________
aim: afastgerman
BSK is offline   Reply With Quote
Old 01-18-2006, 08:53 PM   #2
Keeper of the Cash
Account #: 81303
 
Nate (ETKA+Scumbag)'s Avatar
 
Join Date: Sep 2004
Location: Iowa
Posts: 26,600
Default Horay! Just what I needed.

__________________
"There might be intelligent beings created by God in outer space even if there are none here on Earth."



Nate (ETKA+Scumbag) is offline   Reply With Quote
Old 01-18-2006, 09:17 PM   #3
AudiWorld Super User
Account #: 3484
 
Join Date: Apr 2000
Posts: 4,549
Default Good job. Something else to look forward to :(

This should go into the tech section.
pointby is offline   Reply With Quote
Old 01-18-2006, 09:22 PM   #4
BSK
AudiWorld Super User
Account #: 54666
 
Join Date: Apr 2003
Posts: 16,815
Default i will do a writeup for control arms as well

whenever i get the time and find the pics from back in the day when we did those. i dont think that there is a complete control arm article out there.
__________________
aim: afastgerman
BSK is offline   Reply With Quote
Old 01-19-2006, 01:57 AM   #5
AudiWorld Super User
Account #: 12690
 
Join Date: Nov 2000
Posts: 9,788
Default First pic is free....

...each additional, $1/click ;-)

Andy
__________________
Andy_FL is offline   Reply With Quote
Old 01-19-2006, 03:33 AM   #6
New Member
Account #: 94074
 
Join Date: Jul 2005
Posts: 399
Default Awesome, i might have to do that soon...

Sometime i get the whiff of G-12 from my engine but i can't find any leaks.

Ken
__________________
Mod: Pure MS Snub Mount, More to come
Recent Repairs: All Belts, Timing Belt Tensor, Water Pump Impellar | Transmission Mounts | New Engine Mounts | Replaced Water Pump Housing
B5 A4 FAQ
Black 99.5 A4 1.8TMQ 103,000 and counting. Located in Baltimore, MD.
BMORE_Ken is offline   Reply With Quote
Old 01-19-2006, 04:50 AM   #7
Banned
Account #: 143
 
Join Date: Mar 2000
Posts: 34,549
Default nice.

ModifiedA4 is offline   Reply With Quote
Old 01-19-2006, 05:38 AM   #8
AudiWorld Super User
Account #: 7687
 
Join Date: Jul 2000
Posts: 12,905
Default Hmmm, wonder if I should do that when i do the sensor just cuz.

__________________
Current:
2001 Audi A4 Avant, Stage 3 (11 years, 99K)
1999 Audi A6 Avant, Worn (1 year, 138K)
Sold:
1996 Audi A6 Avant (5 years, 155K)
*(Owned, Odometer)
Greyhound Guy is offline   Reply With Quote
Old 01-19-2006, 05:53 AM   #9
AudiWorld Member
Account #: 32518
 
Join Date: Feb 2002
Posts: 519
Default Nice write up

SilverStar is offline   Reply With Quote
Old 01-19-2006, 06:38 AM   #10
New Member
Account #: 91880
 
Join Date: May 2005
Posts: 218
Default You think the whole flange needs to be replaced or just the seals?

I know you mentioned you didn't see any physical damage, so that would lead me to beleive that just the seals are bad.

Any corrosion or anything else to suggest the replace the whole thing?

Nice writeup!
Rocket3004 is offline   Reply With Quote
Old 01-19-2006, 06:38 AM
AudiWorld
Audi R8




Paid Advertisement
 
 
 
Reply

Tags
18t, 1999, 2004, a4, audi, coolant, coolent, cooling, coolint, diagram, engine, flange, hose, price, rear


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -8. The time now is 09:22 PM.


Copyright 2014 AudiWorld.com Audi Enthusiast Community

Personal Contacts

SEO by vBSEO ©2011, Crawlability, Inc.