ABS ECU Rebuild Recomendations
#1
Audiworld Junior Member
Thread Starter
Join Date: Apr 2001
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
ABS ECU Rebuild Recomendations
So busy weekend planned. Finally got VAG-COM and confirmed the ABS unit is incommunicado. The two places I'm looking at for rebuild are Module Masters in Moscow, Idaho and Auto Electronics in Rogersville, Tennessee.
http://www.modulemaster.com
http://www.autoecu.com
MM is closer to Seattle, so shipping would be quicker for less and I've seen the recommended on this forum, but AutoECU's rebuild is less expensive (about $100 vs $160), they offer a longer warranty (lifetime vs 5-yr), and cover return shipping costs.
My pocket-book says go with AutoECU. Anybody have any bad experiences and/or recommendations for either?
dp
http://www.modulemaster.com
http://www.autoecu.com
MM is closer to Seattle, so shipping would be quicker for less and I've seen the recommended on this forum, but AutoECU's rebuild is less expensive (about $100 vs $160), they offer a longer warranty (lifetime vs 5-yr), and cover return shipping costs.
My pocket-book says go with AutoECU. Anybody have any bad experiences and/or recommendations for either?
dp
#2
Audiworld Junior Member
Thread Starter
Join Date: Apr 2001
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Re: ABS ECU Rebuild Recomendations
Hmm, may have found a partial answer on this one.
https://forums.audiworld.com/a4/msgs/2755643.phtml
Looks like the same company (ATE) who has since moved. Most of the negative posts are pretty old, but having not seen bad new on the MM front...my decision may be made.
Input from others still appreciated.
dp
https://forums.audiworld.com/a4/msgs/2755643.phtml
Looks like the same company (ATE) who has since moved. Most of the negative posts are pretty old, but having not seen bad new on the MM front...my decision may be made.
Input from others still appreciated.
dp
#4
I used BBA through an eBay purchase.
It was a bit of a PITA to:
1) jack up car, remove wheel, remove wheel liner, unscrew module, secure/cover assembly, replace wheel liner, replace wheel, unjack car
2) mail in module
3) get rebuilt unit
4) jack up car, remove wheel, remove wheel liner, screw module on, replace wheel liner, replace wheel, unjack car
5) note that ABS light was still on
6) jack up car, remove wheel, remove wheel liner, unscrew module, secure/cover assembly, replace wheel liner, replace wheel, unjack car
7) contact BBA regarding warranty
8) pay my own shipping to mail it back to them (this ticked me off)
9) wait
10) receive re-rebuilt unit
11) jack up car, remove wheel, remove wheel liner, screw module on, replace wheel liner, replace wheel, unjack car
12) ABS light finally gone
...... I'd still recommend them, though.
1) jack up car, remove wheel, remove wheel liner, unscrew module, secure/cover assembly, replace wheel liner, replace wheel, unjack car
2) mail in module
3) get rebuilt unit
4) jack up car, remove wheel, remove wheel liner, screw module on, replace wheel liner, replace wheel, unjack car
5) note that ABS light was still on
6) jack up car, remove wheel, remove wheel liner, unscrew module, secure/cover assembly, replace wheel liner, replace wheel, unjack car
7) contact BBA regarding warranty
8) pay my own shipping to mail it back to them (this ticked me off)
9) wait
10) receive re-rebuilt unit
11) jack up car, remove wheel, remove wheel liner, screw module on, replace wheel liner, replace wheel, unjack car
12) ABS light finally gone
...... I'd still recommend them, though.
#6
Audiworld Junior Member
Thread Starter
Join Date: Apr 2001
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Re: I like them too. They are in Mass, though, so he might be better off with MM.
Had heard of BBA too from the audifans list. Their price is a little better than MM, but I think unless I hear something terrible about MM, I'll probably go with them.
Also couldn't help but notice an audiworld poster proffering repair services too.
dp
Also couldn't help but notice an audiworld poster proffering repair services too.
dp
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Phil type 951
A4 (B5 Platform) Discussion
4
07-28-2005 10:50 AM
mtl expos RIP
A4 (B5 Platform) Discussion
3
01-06-2005 09:02 AM