90quattrocoupe

I know that one of the main things to do is change the coupes to 5x112 hubs,
but it is a pain to buy the rotors. I have found a USA Audi rear OE replacement.

I was looking at the Ate web site and comparing rotors. This is what I
found.

S2 rear brake discs

CONTINENTAL TEVES (ATE)

Part number 24.0110-0261.1

Cross reference to Audi part numbers
895 615 601 A
S2 Coupe

8E0 615 601 B
A4 02-03 A4/Avant
A4 02-03 A4/Avant Quattro
CAB 03-03 Audi Cabrio


ATE article information on the brake disc for both discs as taken from Ate
web site.

Diameter [mm] 245
Brake Disc Thickness [mm]: 10.0
from Model Year: 10.92
Minimum Thickness [mm]: 8.0
Brake Disc Type: full
Number of Holes: 10
Fitting Side: rear
Height [mm]: 40.0mm
Centering Diameter: 68.0
Inner Diameter [mm]: 135.5
Bore Ø [mm]: 15.3

The rotors are the same. Now you can find it at the local shop.

SLAB

where did you find that info? link?

90quattrocoupe

<ul><li><a href="http://tecdoc.contiteves-am.com:7001/toc/de/COcfoSsUC4kflQuKyDIaFhZLX7OhtwLVDrsJTXMyVUKEMeub5B T1!-2008373047!-647029143!7001!7002!11166095677354.srv?dlg=CtrDefa ult&amp;action=SetJavaVersion11&amp;java13=false"> http://tecdoc.contiteve

Ben's e//S2

what about fronts?

SLAB

all i see is a red "X" there.....does it require a plugin?

90quattrocoupe

But I am working on it. I am going to try to use the S4-S6 front hubs and rotor. Preliminary measurements have the hub as 2 to 3mm thicker than a coupe and the rotor hat as 2 to 3mm deeper. Both use 82mm bearing. It would work, but would have to run deeper offset wheel.