Jaredg

Currently I am using PN 035 919 561A which works fine for the guage but causes the idiot light to throw.

Any ideas what the correct one is?

Brdman*

Did you plug in both wires?

Brdman*

<ul><li><a href="http://www.mnsi.net/~natwhite/Audi/auxgauge.htm">http://www.mnsi.net/~natwhite/Audi/auxgauge.htm</a</li></ul>

Jaredg

<center><img src="http://www.mnsi.net/~natwhite/Audi/Images/v6block.jpg"></center><p>The oil pressure sensor for the oil pressure warning system was in the same location as the oil pressure sender for gauge in the picture. I suppose I need to add the oil pressure sensor for the oil warning system on the opposite side of the T in the block so it would sit underneath the air conditioning compressor??

zeems

Does your new Oil Pressure Sender have 2 prongs?

Jaredg

When the line for the oil pressure sensor for the oil pressure warning system is hooked to it it throws the wrong signal and the idiot light displays.

zeems

Ok, so switch the wires on the sender around.

Jaredg

no dice

zeems

Check your oil???

Jaredg

umm oil is fine thanks