Safe Boost Level for 30v with SC
#1
Safe Boost Level for 30v with SC
Does anyone know what pound range of boost is safe to run on a 2.8 with a blower, for every day driving? I am thinking of putting a smaller pulley on when I install my G2. Just curious if anyone has had trouble w/too much boost.
Thanks, I'll also try this post on the forced induction forum.
Thanks, I'll also try this post on the forced induction forum.
#4
Re: Safe Boost Level for 30v with SC
Mark,
Well, it's definitely not 12. For default pulley size it's about 8PSI. Do a search on scaudi.com for people reporting issues with smaller pulleys, you should stick with the stock pulley for the time being. It's too much of a risk, without proper software compensation and an intercooler.
I would say 4Rings had some trouble with too much boost.
Pete
Well, it's definitely not 12. For default pulley size it's about 8PSI. Do a search on scaudi.com for people reporting issues with smaller pulleys, you should stick with the stock pulley for the time being. It's too much of a risk, without proper software compensation and an intercooler.
I would say 4Rings had some trouble with too much boost.
Pete
Thread
Thread Starter
Forum
Replies
Last Post
pane2k
S4 / RS4 (B5 Platform) Discussion
9
12-19-2006 04:02 AM
lonecrow
A4 (B5 Platform) Discussion
5
06-26-2006 05:14 PM
Slow Sport Sedan
Audi A3 / S3 / RS 3
7
05-01-2006 10:44 AM